Axis Camera Station Guida rapida alla configurazione

Altri manuali per Camera Station

7

Questo manuale è adatto per i seguenti modelli

1

Indice

Altri manuali Axis Telecamera IP

Manuali Telecamera IP popolari di altre marche

FLIR

FLIR Exx series Manuale utente

Avigilon

Avigilon H4A-BO1-IR Manuale utente

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuale utente

ShareTech

ShareTech AV1 Manuale utente

Ezviz

Ezviz C6C Manuale utente

Melchioni

Melchioni UCAM 2015 Manuale utente

Geutebruck

Geutebruck G-Cam/ESD-4630 Manuale utente

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manuale utente

Mitel

Mitel 6800i Series Manuale di servizio

Vitek

Vitek VTC-IR403-212NP Manuale utente

THOMSON

THOMSON DSC - 323W Manuale utente

AVer

AVer FB2027 Manuale utente

ENFORCER

ENFORCER EV-T5105-N2SQ Manuale utente

Wansview

Wansview NC543 Manuale utente

Eneo

Eneo MCB-64A0003M0A Manuale utente

deView electronics

deView electronics CBDNI36F Manuale utente

Swann

Swann SwannEye Manuale utente

LevelOne

LevelOne IP CamSecure Manuale utente

1

Please note that AXIS does not take any responsibility for how this configuration

may affect your system. If the modification fails or if you get other unexpected

results, you may have to restore the factory default settings as described in the

User’s manual.

HOW TO

Integration Guide AXIS Camera

Station and AXIS A8004-VE

Created: May 11, 2015

Last updated: May 11, 2015

HOW TO –Axis CommunicationsIntegration Guide AXIS Camera Station and AXIS A8004-VE

Rev: 1.1, Last updated: 13/05/2015 2

Rev: 1.1

Introduction

The following document highlights how to add a door station to Axis Camera

Station and then complete further configurations that can be made to meet an

operator’s need:

The document explains how to:

Add a door station to Axis Camera Station.

Play an audible alert on the client PC when a call from the door station

is being made.

Create an alarm alert associated with the call (creates alarm log and

pop up).

To bring the door station video to the front view.

This following configuration has been tested with the following products and

firmware:

AXIS A8004-VE, firmware 5.65.1 and Axis Camera Station 4.2.

Step 1 –Adding a door station

Add the door station as you would a camera:

1) “Configuration”/ “Add/Edit Cameras”/ “Add”

2) Select the door station when it is found by the search to add the device to the system. Once

the door station is added give it a name the operator can relate to.

The door station should be available in the live view. When you put the mouse on the screen you will

get an “Open Door”button appear.

If you press the button on the door station the incoming call buttons will appear. You can then answer

or decline the call.

HOW TO –Axis CommunicationsIntegration Guide AXIS Camera Station and AXIS A8004-VE

Rev: 1.1, Last updated: 13/05/2015 3

Step 2 –Configure an audible alert on the client PC

To configure an alarm sound to alert the operator that there is an incoming call.

1) Select the configuration tab (top right corner)

2) Select Options/Customize

3) Select Notifications and select “Beep” or “Sound file”. Useful alarm .wavs can be

found on the internet.

Note: Use this when configuring any alarm on Axis Camera Station to trigger and audible

alert on the operators PC and not just an event in the alarm box.

The next step is to create an event trigger from the door station to trigger the audible alert.

HOW TO –Axis CommunicationsIntegration Guide AXIS Camera Station and AXIS A8004-VE

Rev: 1.1, Last updated: 13/05/2015 4

Step 3 –Create a trigger associated to the call

Configure an event trigger associated to the call:

1) Select “Configuration”/ “Event Configuration”/ (you will see the default record and

door open rules created by the door station and any others already configured in the

system). Select “New” and then select “Add”.

2) In the add trigger window select “Device Event”. Select the “A8004-VE in the device

list (This will be the name given to the device). In the Event pull down, select “State”

in the Call selection. Then in the filter selection select “Calling”. Press Next.

HOW TO –Axis CommunicationsIntegration Guide AXIS Camera Station and AXIS A8004-VE

Rev: 1.1, Last updated: 13/05/2015 5

Step 4 –Create actions associated to the trigger

You can now create actions associated with the trigger. The following describes how the call

will trigger the audible alert and log it with the alarm list.

1) Add the action “Raise Alarm” – Give it a description like “Call from Main Entrance”.

You can also put a description or extra text such as “Check ID”.

2) You can also add a procedure (tick the box and upload txt file.). This can contain

additional information such as who to contact if there is an issue.

An optional action would be to bring the video of the door station to the front. This is optional

as this could interrupt the operators viewing of a live security event, so should be discussed

when configuring.

3) Add another action “Live View”, select the door station in the View and tick the bring

application to the front. Press “Next”.

4) Configure Schedule if needed.

5) Name the Rule “Door Station Actions” or similar and press finish.

When the push button is pressed, the following should occur:

An audible alert will play on the operator PC.

A door alert will be in the alarm log.

The door station video will come to the front view.

HOW TO –Axis CommunicationsIntegration Guide AXIS Camera Station and AXIS A8004-VE

Rev: 1.1, Last updated: 13/05/2015 6

Step 5 –Record the audio and video from the door station

You can record the audio from the door station as well as the video. Note that only the audio

from the door station will be recorded, the audio from the Axis Camera Station client will not

be recorded.

Before enabling please check that you are adhering to local codes of practice.

1) Select the “Video & Audio” configuration setting and select (double click or edit) the

door entry station.

2) Select the “Live view and recording” button if you wish to record the audio from the

door station.