O’Dive instruction manual Updated on 09/07/2020
9
-If the measurement is unsatisfactory, the application will prompt you to repeat the
measurement. Make sure that the sensor is correctly positioned and that you follow
the instructions given (no talking, relaxed arm, forced breathing).
-At the end of a series of two measurements (left then right), the sensor switches off
automatically.
-To perform the second series of measurements (30 minutes after the first one), select
New measurement, press Use current dive so that all measurements are related to the
same dive.
Step 6 –Validating and synchronizing measurements
Once the measurements are done, you must input your dive parameters and synchronize your
data with Azoth Systems’ server to get your results.
Note: synchronization of the data requires a connection to a Wi-Fi or a 4G network.
Input your dive parameters
-Go to My results. Select your dive under the ‘Pending’ tab. You can then either import
the dive profile or do a manual input.
For importing the profile, click on Import data then Import from a dive computer
(works only with Shearwater), Import from Suunto cloud or Import from Subsurface
cloud and select the corresponding dive. Then, fill in the fields left in blank and validate.
For a manual input*, input your dive parameters and validate.
*Reminder: Manual input of the dive parameters is reserved for square dives (see
O’DIVE Perimeter and usage restriction). Only the O'Dive ONE sensor can process
multilevel dives using an equivalent square profile approach for Air/Nitrox mixes.
Synchronize your data on the server
-Once your parameters are input, go to the section My results and click on Synchronize
on the top right corner of the screen. The dive and the related measurements are sent
to our server to be analyzed and are now listed under the ‘Dives’ tab.
-In case there are still some dives under the ‘Pending’ tab with the pictogram ⓘ, you
must input the dive parameters and synchronize one more time.
Step 7 –Evaluating your procedures
A few minutes after the dive, you will receive an email notification indicating that your dive
has been analyzed. This recommendation is presented as a graph evaluating the level of
adequacy of your decompression procedure to your diving practice.
-Go to the section My results and click on Synchronize. You will be able to see on the
graph if your decompression procedure is optimal, perfectible or to be changed.
