babcopark Starke 2127 Manuale utente
User Manual for Pit Lift
01
03
06
06
38
44
45
47
55
Certificate
56
Safety Instructions
Overview of Parking Lift
Installation
Hydraulic & Electric
Operation
Surface Cleaning & Protection
Maintenance & Servicing
Warranty Policy
Package
１ Important Safety Instructions
1.1 Requirements of installation
Generally, parking lis are to be installed with the following condions:
1) Supply voltage: 0.9 – 1.1 nominal supply voltage
2) Source frequency: 0.99 – 1.01 nominal frequency
3) Ambient temperature: -10℃ to +40℃
4) Relave humidity: not exceed 50% at 40℃
5) Atmosphere: Free from excessive dust, acid fumes, corrosive gases and salt.
6) Avoid exposing to direct sunlight or heat rays which can change the environmental temperature.
7) Avoid exposing to abnormal vibraon.
8) Electrical parts shall withstand the effects of transportaon and storage temperature within a range of
-25℃t o 55℃ and for short periods not exceed 24 hours at up to +70℃.
The Pit Lift is designed for cars parking under the stated maximum weight, any other usage is to be considered
improper, thus highly forbidden. Babcopark will not be responsible for any damage or injury resulng from
neglect or failure of carrying out the requirements in this manual.
The series of pit two post parking lis are designed for indoor use only.
Read this manual carefully before using the machine and follow the instrucons in this manual to ensure the
parking li with excellent performance and long lifeme.
1.2 Qualified personnel
1.2.1 The pit parking li should only be installed, operated and maintained by authorized and trained staff,
properly trained for the specific use of the parking li.
1.2.2 The wiring work must comply with local code and be carried out by a cerfied electrician according to
local laws/regulaons.
1.2.3 All adjustments, whether mechanical or electrical, shall only be carried out by authorized persons in
accordance with manufacturer’s instrucons.
1.3 Notes
1.3.1 The construcon of the foundaon pit are to be carried out in accordance with foundaon requirements by
the manufacturer and local laws/regulaons before installaon of the parking li.
1.3.2 Read and understand all safety warning procedures before installing and operang the parking li.
1.3.3 Keep hands and feet away from any moving parts. Keep feet clear of the parking li when plaorm
lowering.
1.3.4 Make sure there is no one in the vehicle before operaon.
1.3.5 The parking li is only designed to li the enre body of the vehicle with maximum weight not more than
the rated capacity.
1.3.6 Always ensure that safety devices are in good condion before operang the parking li.
1.3.7 It is recommended to back vehicles into the parking li, opposed to forward.
1.3.8 Vehicle shall be parked on the le-right center of the plaorm, with rear res reaching the wheel stopper.
1.3.9 Do not modify the parking li without manufacturer’s permission.
1.3.10 If not to be used anymore, it’s recommended to turn off the power supply, empty the oil tank and dispose
of the fluid properly according to local regulaons.
01
Chapter 1 Safety Instructions
1.3.11 If the parking li is to be le unused for a long period of time, it’s recommended to:
1.3.11.1 Turn off the power switch on the control box and main switch of the power supply
1.3.11.2 Empty the oil tank and dispose of unused oil properly according to local environmental laws and
regulaons.
1.3.11.3 Apply rust prevenve oil on chains regularly
1.3.11.4 Grease the moving parts which might be damaged by dust or moisture
1.4 Warning signs
The presence of safety warning labels on the parking li are essenal to protect users from mis-operaon. Read
carefully and pay attention to the warning labels before operaon. The labels must be kept clean and must to be
replaced once unrecognizable or damaged.
02
Chapter 1 Safety Instructions
1
3
3
2
2
1
4
4
5
5
6
２ Overview of Parking Lift
2.1 Product Introduction
Pit Lift ispit .
platforms
must
a
a
2.2 General parts
3 Platform
1 Post
4 Cylinder
2 Connection support
5Anti-falling lock
6 Oil hose
03
Pit Lift Overview
2.3 Dimensions of standard models
Pit Lift
Pit Lift
16161750
5000
5300
1766
5000
5300
04
Pit Lift Overview
Notes:
the single platform pit lift the double platform pit lift
Babcopark
2.4 Scope of application
etc.
Babcopark
2.5 Noise protection
S
B
D
B
D
B
S
2550
2650
2750
Space
requirements (B)
2300
2400
2500
Clear platform
width
4900
5000
5100
5200
5300
4600
4700
4800
4900
5000
Space
requirements (B)
Clear platform
width
7450
7750
8050
2300+4600
2400+4800
2500+5000
Space
requirements (B)
Clear platform
width
Single unit (2 cars) Double unit (4 cars) Combined unit (6 cars)
05
Pit Lift Overview
３ Package
Pit parking liftss
ing
a
４ Installation
4.1 Important note
4.1.1ing
4.1.2
4.1.3
ain
4.1.4mustUntrained staff
4.1.5
4.1.6
4.1.7s
4.1.8
4.1.9
4.1.10
4.1.11
labeleds
2.6 Protection against corrosion
Maintenance work
tants
2.7 Fire safety
2.8 Railings
06
Pit Lift Overview
4.1.12s
4.1.13
4.2 Preparation
4.2.1with
4.2.2sl
4.2.3
BabcoparkBabcopark
exist
4.2.4
4.2.5
moisture,s
4.2.9A pthe
4.2.10
4.2.11
4.3 Necessary tools
4.4 Foundation treatment
4.4.1
4.4.2
4.4.3
any
4.4.4
are
Sealing tape
e
g
!
07
Pit Lift Installation
4.4.5
4.4.6
1350 1000
300
1600
300
A
A
Pit Lift Single Platform
0
150
150
300
300 300
08
Pit Lift Installation
Questo manuale è adatto per i seguenti modelli
1
Altri manuali babcopark Sistema di sollevamento
Manuali Sistema di sollevamento popolari di altre marche
Genie
Genie Z-60/34 Manuale utente
Screen Technics
Screen Technics INTERFIT Vertical Up Lift Manuale utente
Mortuary Lift
Mortuary Lift ULTIMATE 1000 Manuale utente
Custom Equipment
Custom Equipment Hy-Brid 3 Series Manuale di programmazione
Custom Equipment
Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione
Hy-Brid Lifts
Hy-Brid Lifts HB-P3.6 Manuale di programmazione
