BAFANG C965 Manuale utente
Manual
C965
1
1 Product
Name
1.1 The Middle install intelligent LCD Display
1.2 Model:APT12LCD800U
2 Type
2.1 C965
3 Electrical
Parameters
24V/36V battery supply
Rated operating current : 10mA
Max operating current : 30mA
Off leakage current < 1uA
Buzzer tone > 55db ( 20cm )
Output current to the controller : 50mA
Operating temperature : -18～60℃
Storage temperature : -30～70℃
4 Dimensions & Material
4.1 Product shell is ABS, transparent window is made with high strength Acrylic, the
stiffness equals the tempered glass.
4.2 Dimensions : host/L90mm*W54mm*H13.3mm
2
3
5 Features
5.1 Two-way serial communication, 5-way button, very easy to operate.
Speed display : AVG SPEED, MAX SPEED, real time SPEED.
Kilometer / Mile : Can be set according to customers’ habits.
Smart battery indicator : Provide a reliable battery indicator, it will not fluctuate
with the motor on/off.
Automatic headlamps & background light : 800U can automatically open/close
the headlamps & backlight according to the external light.
Buzzer remind : Built-in buzzer, sound alert in multi-state, such as Key tone / Low
temperature warning / Low battery indicator / Failure warning…
Temperature display : Indicate ambient temperature, indication range is
-20℃~50℃, higher than 50℃will display HI, lower than -20℃will display Lo.
4
b.
a. >50℃ b. <-20℃
Maintain remind : 800U can indicate the maintain information according to the
battery cycle times and the riding mileage(ODO). 800U can estimated the battery
cycle life .
Low temperature warning : 800U can alarm the user by LCD&BUZZER when the
temperature is below freezing.
Low temperature warning
The brightness of the backlight adjustable : 5-sections
9-level ASSIST : 3-ASSIST/5-ASSIST/6-ASSIST/9-ASSIST optional
Power indicator : Real-time battery output power indication
Mileage indicator : Odometer/Trip distance/ Riding time
Error code indicator
Parameter settings : Multiple parameter can be set through computer USB port,
including ASSIST level / Wheel diameter / Voltage / Speed limit / Magnetic steel /
Number of halls…
6 LCD
instructions
The figure of LCD display see below:
5
7 Functional
Description
7.1 Power On/Off
Press and hold Power button for 1 second can turn on/off the Display. The Display will
automatically shut down when there is no operate & ride for 5 minutes.
7.2 ASSIST operating
Short press UP/DOWN button can change the ASSIST level. Top ASSIST level is 9, 0
for neutral. Level quantities can be adjusted according to the customer requirements.
6
7.3 Speed mode switch
Short press LEFT button can change the speed mode, Speed->AVG Speed->MAX
Speed.
*If there is no operation for 5 seconds, the display will return Speed (Real-Time) display
automatically.
7.4 Mileage mode switch
Short press RIGHT button can change the mileage mode, Trip->ODO-> Time.
7.5Headlight/backlight On/Off
7
Press and hold UP button for 1 seconds can turn on/off the headlight/backlight.
The motor does not work when the battery voltage is low, display still can keep the
headlight on for a while when E-bike is in riding.
*At the automatic light sensor mode, press and hold the UP button can turn on the backlight /
headlights. If automatic light sensor had opened the backlight / headlight, press and hold the
UP button can not turn it off. First you should turn off the automatic sensor mode in display
settings, and then turn off the light manually.
7.6 6km walk
Press and hold DOWN button for 1 seconds can get into 6km walk mode, out of the
mode when release the button.
7.7 Data cleanup
Press and hold RIGHT button for 1 seconds can cleanup the several temporary data,
the temporary data include AVG Speed / MAX Speed / Trip / Time.
8 Parameter
settings
Double press POWER button(press interval less than 0.3 second), the Display get into
parameter setting state, the current parameter flashing, short press UP/DOWN buttons to
8
set the parameter values, short press LEFT/RIGHT buttons to switch the parameters, short
press POWER button to exit the parameter setting state. The display will automatically exit
the parameter setting state when there is no operation for 10 seconds.
The order of parameter settings are as follows
Kilometer/Mile Light sensitve Backlight
brightness Buzzer on/off
Auto off time
Maintain remind
Wheel diameterVoltage set
Speed limit set
Power display
Password
8.1 Kilometer / Mile : The location of speed display symbol S7, press UP/DOWN
button rotate display the symbol km/h / MPH (Km / Mile).
8.2 ℃/℉: the location of speed display symbol CF, press UP/DOWN button rotate
display the symbol ℃/ ℉.
9
8.3 Light sensitive : The location of speed display symbol bL0, press UP/DOWN
button display symbol 0~5 , 0indicate automatic headlight/backlight OFF. 1~5 indicate
automatic headlight/backlight ON. 1 indicates the brightest on (auto turn on the
backlight at bright environment), 5indicates the darkest on (auto turn on the backlight at
dark environment).
8.4 Backlight brightness : The location of speed display symbol bL1, press
UP/DOWN button display symbol 1~5 to change the brightness of the backlight.
8.5 Buzzer on/off : The location of speed display symbol bEP, press UP/DOWN
button rotate display symbol 0/1, 0 indicates buzzer off, 1 indicates buzzer on.
10
Altri manuali per C965
2
Indice
Altri manuali BAFANG Accessori per biciclette
BAFANG
BAFANG H310 Manuale utente
BAFANG
BAFANG DPC-10 Biktrix Manuale utente
BAFANG
BAFANG DP C01.CAN BUS Manuale utente
BAFANG
BAFANG M800 Manuale utente
BAFANG
BAFANG DP C231.CAN Manuale utente
BAFANG
BAFANG DP E161.CAN Manuale utente
BAFANG
BAFANG DP C171.UART Manuale utente
BAFANG
BAFANG H550 Manuale utente
BAFANG
BAFANG M510 Manuale utente
BAFANG
BAFANG DP E161.CAN Manuale utente
BAFANG
BAFANG DP C01.RS 232.7 Manuale utente
BAFANG
BAFANG UB40 Manuale utente
BAFANG
BAFANG DP C240.CAN Manuale utente
BAFANG
BAFANG C961 Manuale utente
BAFANG
BAFANG UB600 Manuale utente
BAFANG
BAFANG BT C01.340.UART Guida di riferimento
BAFANG
BAFANG DP E170.CAN Manuale utente
BAFANG
BAFANG DP C10.UART Manuale utente
BAFANG
BAFANG C966 Istruzioni operative
BAFANG
BAFANG DP C13.CAN Manuale utente
