Balanced Audio Technology VK-6200 Manuale utente

VK-6200

WARRANTY REGISTRATION FORM

Unit Serial Number: _______________________________________

Customer Name: _______________________________________

Address: _______________________________________

_______________________________________

Date of Purchase: _______________________________________

Purchased From:

Dealer Name: _______________________________________

Address: _______________________________________

_______________________________________

IMPORTANT NOTE:

In order to receive the full five year product warranty, please mail this

completed form together with a copy of your sales receipt to Balanced Audio

Technology at the address below, within thirty days of purchase.

Failure to do so will result in the product being warrantied for one year

from the date of manufacture.

1300 First State Blvd. Suite A Wilmington, DE 19804

Tel: 302-999-8855 Fax: 302-999-8818

VK-6200

Multi-Channel Power Amplifier

Owner's Manual

1300 First State Blvd. Suite A Wilmington, DE 19804

Tel: 302-999-8855 Fax: 302-999-8818

Introduction

Thank you for your purchase of the Balanced Audio Technology VK-6200 balanced power

amplifier. Please read this owner's manual to obtain the full benefit of the VK-6200 in your

system. It will provide you with the needed safety information and operating procedures for this

exceptional unit.

WARNINGS:

To prevent the possibility of serious injury, electrical shock or fire:

DO NOT operate with the cover removed.

DO NOT expose to rain or moisture.

DO NOT defeat the ground power-plug.

DO NOT replace fuses with anything other than the same type and rating as supplied by the

factory.

Package Contents

Included in the box should be the following:

Description Quantity

VK-6200 Power Amplifier 1

Power Cord 1

Spare Fuses 3

Spare Top Cover Screws 5

Owner’s Manual 1

Optional Accessories (as ordered)

Save all the packaging material in a safe dry area for the unlikely event that you need

to return the VK-6200 to the factory for service.

Physical Placement

It is recommended that you provide for at least 6" of free space around the unit for proper

ventilation. High power amplifiers like VK-6200 benefit from extra ventilation around them.

Providing unobstructed air flow around the unit will assure cooler operation of its internal

components and will extend its service life.

Mount the unit on a hard surface with proper ventilation underneath.

Do not stack the VK-6200 power amplifier on top of other units, nor vice versa.

IMPORTANT NOTES:

To assure reliable operation always turn the VK-6200 OFF while making or changing

input or speaker connections. No connections should be made while the

amplifier is ON.

If the VK-6200 was turned OFF for any reason, wait at least 30 seconds before

turning it back ON.

Input Connections

Best results will be obtained when connecting the VK-6200 to a balanced preamplifier.

However, the VK-6200 is designed to accept either balanced or single-ended inputs.

Each channel of VK-6200 has two input connectors – one XLR for balanced connections, and

one RCA for use with single-ended interconnects. Input selector switch allows you to select

the right input connector for your application.

Speaker Connections

Each channel of VK-6200 is equipped with one pair of high quality binding posts. These

can accommodate a wide variety of speaker cable terminals. You can use a 7/16” wrench

to tighten these binding posts, however excessive force should be avoided to eliminate the

chance of breakage.

Operating the VK-6200

Turning the VK-6200 On:

The power switch is located in the center of the front panel of the VK-6200. Pressing on the

top of switch bar will turn the unit ON and OFF, provided the VK-6200 is not in its Standby

mode (see below for operation in Standby mode).

Front Panel Indicators:

There are three LED indicators on the front panel of the VK-6200:

1. Blue Power ON indicator

2. Green STANDBY indicator.

3. Red FAULT indicator

Their operation is described below:

Blue Power On indicator:

It comes ON when the unit is powered up. Pressing the power switch will make the unit

alternate between its ON and OFF state, provided it is not in its STANDBY mode.

NOTE: Your VK-6200 is equipped with a smart power ON management circuit. This

circuit applies power only to those channels that are installed. It does so in sequence,

minimizing the initial power surge in order not to stress your power line. When turning the

VK-6200 ON you will hear several relay clicks inside the unit. The number of clicks will be

equal to the number of channels installed in the chassis.

When additional channels are installed in the VK-6200 chassis, the circuit will

automatically recognize them and power them up in proper sequence.

Green Standby Indicator:

The green indicator comes ON when the unit is in its Standby mode. In this case, pressing

the POWER switch will make the unit alternate between OFF and Standby states.

NOTE: VK-6200 is automatically switched into its Standby mode when a remote control

plug is installed in the Remote IN jack on the back panel. In that case VK-6200 can be

only turned ON by application of the remote 12V trigger signal to the remote IN

connector. A 3.5mm Mono Phone Plug is used for the remote control connector. It

should be wired as follows:

Case (Outer Lead) Negative

Center Lead +12V Trigger Source

Red Fault Indicator:

The red FAULT indicator will come ON when the unit detects any kind of fault condition

with any of its channels.

The possible reasons include:

1. Channel overheating. In this case the Fault LED will be flashing until the channel has a

chance to cool down to its normal operating temperature. At this point the Fault indicator

will turn OFF.

2. One of the amplifier channels had detected an internal fault. In this case the Fault LED

will stay ON. It is advisable in such a case to turn the VK-6200 OFF for several minutes

and then turn it ON again. In some cases this may clear the fault and the unit may resume

normal operation.

3. If the RED Fault indicator stays ON permanently, then the unit may have an internal fault

that requires service.

Remote Control Connectors:

The VK-6200 is equipped with Remote IN and OUT connectors mounted on its back panel.

These allow the amplifier be turned ON remotely from any controller equipped with +12V

trigger signal output. The external +12V trigger voltage should be applied to the Remote IN

connector (see above on the proper way to wire the remote control plug). In cases when

multiple units should be triggered by the same remote control signal, the Remote OUT

connector can be used to transmit the +12V signal to the next unit. The same type 3.5mm

Mono plug should be used for that purpose as well.

Fuse Protection:

The VK-6200 is protected by a main fuse located on its back panel:

This fuse is rated as follows:

110/120VAC configuration 15A Slow Blow

200/230/240VAC 10A Slow Blow

NOTE: Please make sure that the fuse is replaced only with the same type

and rating fuse.

CAUTION:

Make sure that the VK-6200 is turned OFF and disconnected from the power line

before proceeding with checking or replacing fuses.

A blown fuse in the VK-6200 is an indication of a serious problem. If a replacement fuse

fails as well, no further attempts at servicing the unit should be undertaken. Please contact

the factory for professional service.

Servicing

The Balanced Audio Technology VK-6200 does not require periodic service to maintain its

high performance. In case of malfunction, (when replacing fuses fails to eliminate the

problem) please direct any further service inquiries to the factory.

Cleaning

To remove dust, occasionally wipe the front and top surfaces of your VK-6200 with a damp

soft cloth. If fingerprints appear, you may use a mild, non-alkaline soap solution. Do not use

abrasive cleaners, as they may damage the fine finish of the unit.

Specifications:

Number of Channels From 2 to 6

Output Power into 8 Ohm 200Wpc

Output Power into 4 Ohm 400Wpc

THD at Rated Power Less than .2%

Gain: 23dB in balanced mode

29dB in single-ended mode

Input Impedance 47kΩeach phase

Dimensions: 19” x 10.5” x 23”

Weight 100lb for two-channel chassis

20lb each additional channel

Five Year Limited Warranty

Terms and Conditions

1. Limited Warranty

Upon receipt of the attached warranty registration form, Balanced Audio Technology warrants the purchased

product to be free from manufacturing, materials, and workmanship defects for five years from date of original

purchase, subject to the following conditions. Failure to return the enclosed registration form within 30

days from original purchase will result in a warranty period of one year from the date of manufacture.

2. Limited to Original Purchaser

This warranty is for the sole benefit of the original purchaser of the covered product, and may not be transferred

to a subsequent purchaser of the product.

3. Conditions and Limitations

This warranty is subject to certain conditions and limitations, as follows. This warranty is void and inapplicable

if the product has not been used in accordance with the instructions found elsewhere in this manual, or if it has

been misused or abused, damaged by accident or neglect, or in transport once in possession of the purchaser.

The warranty is also void if the product has been repaired, modified, or tampered with by anyone other than

Balanced Audio Technology or its specifically authorized agents.

4. Remedy

If this product contains a materials, manufacturing, or workmanship defect that cannot be repaired at the

dealership where the product was purchased, it must be packed in original packaging and returned to Balanced

Audio Technology via insured freight, at the owners expense. If replacement packaging materials are required,

they will be supplied by the factory at a nominal charge. Returned products must be accompanied by a

written description of the defect, and a return authorization number (available from the factory via

phone or fax). Upon receipt of defective product, Balanced Audio Technology agrees to repair the product

without charge for parts (except vacuum tubes if the unit is more than one year old), or labor. The product will

then be returned via prepaid, insured freight, with carrier at the sole determination of Balanced Audio

Technology. This constitutes the purchasers sole remedy.

5. Design Changes

Balanced Audio Technology reserves the right to modify its products or change specifications at any time

without obligation or liability to previous purchasers.

6. Miscellaneous

Any implied warranties relating to the above product shall be limited to the duration of this warranty. This

warranty does not extend to any incidental or consequential costs or damages to the purchaser. This warranty

gives you specific legal rights. You may also have other rights which vary from state to state.

Indice

Altri manuali Balanced Audio Technology Amplificatore

Balanced Audio Technology

Balanced Audio Technology VK-20 Manuale utente

Balanced Audio Technology

Balanced Audio Technology VK-50SE Manuale utente

Balanced Audio Technology

Balanced Audio Technology VK-60 Manuale utente

Balanced Audio Technology

Balanced Audio Technology VK-31 Manuale utente

Balanced Audio Technology

Balanced Audio Technology VK-40 Manuale utente

Balanced Audio Technology

Balanced Audio Technology VK-200 Manuale utente

Balanced Audio Technology

Balanced Audio Technology VK-220 Manuale utente

Balanced Audio Technology

Balanced Audio Technology VK-150 Manuale utente

Balanced Audio Technology

Balanced Audio Technology VK-31SE Manuale utente

Balanced Audio Technology

Balanced Audio Technology VK-600 Manuale utente

Balanced Audio Technology

Balanced Audio Technology VK-52SE Manuale utente

Balanced Audio Technology

Balanced Audio Technology VK-3i Manuale utente

Balanced Audio Technology

Balanced Audio Technology VK-60SE Manuale utente

Balanced Audio Technology

Balanced Audio Technology VK-300x Special Edition Manuale utente

Balanced Audio Technology

Balanced Audio Technology VK-30SE Manuale utente

Balanced Audio Technology

Balanced Audio Technology VK-51SE Manuale utente

Balanced Audio Technology

Balanced Audio Technology VK-1000 Manuale utente

Balanced Audio Technology

Balanced Audio Technology VK-5i Manuale utente

Balanced Audio Technology

Balanced Audio Technology REX II Manuale utente

Balanced Audio Technology

Balanced Audio Technology VK-P10SE Manuale utente

Balanced Audio Technology

Balanced Audio Technology VK-75SE Manuale utente

Balanced Audio Technology

Balanced Audio Technology VK-5 Manuale utente

Balanced Audio Technology

Balanced Audio Technology VK-3iX Manuale utente

Balanced Audio Technology

Balanced Audio Technology VK-P10 Manuale utente

Manuali Amplificatore popolari di altre marche

ASTRO

ASTRO HVO V40 P Manuale utente

Marantz

Marantz SUPERSCOPE BLA-545 Istruzioni per il montaggio

NAD

NAD CI980 Manuale utente

Technics

Technics SE-CH770 Manuale utente

Harman Kardon

Harman Kardon HK6300 Manuale utente

NAD

NAD T975 Manuale utente

McIntosh

McIntosh MA6850 Manuale utente

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuale utente

Viatron

Viatron Autrix Manuale utente

GME

GME GA9800 Manuale utente

Atlas

Atlas CP700 Manuale utente

Roland

Roland KC-1000 Manuale utente

Pyle

Pyle PFMRA350BW Manuale utente

Advantage

Advantage S-250 Manuale utente

IRT Electronics

IRT Electronics DVA-3007 Manuale utente

Dimavery

Dimavery BA-100 Series Manuale utente

Sony

Sony XM-S400D Manuale utente

Schertler

Schertler ROY X Manuale utente