Ballu NCA15-EF3.0 Scheda tecnica
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS 01-02
04
COMPONENTS 03
WALL MOUNTING INSTRUCTIONS 05-06
OPERATING YOUR HEATER 07-10
TROUBLESHOOTING 11-13
CARE AND CLEANING 14
WARRANTY AND SERCIVE 15
FOOT INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
persons.
CAUTION:
WARNING:
WARNING:
WARNING:
material a minimum distance of 1 metre from the air outlet.
safety.
• This appliance is intended for household use only and not for commercial or
industrial use.
• Indoor use only.
stored.
01
IMPORTANT SAFETY INSTRUCTIONS
• Always unplug appliance when not in use.
customer to replace a new one.
• Do not twist, kink or wrap the cord around the appliance, as this may cause the
• It is recommended that this appliance is plugged directly into the wall socket. Power
• Do not place appliance close to radiant heat source.
• If your appliance does not work, or is not working properly, contact the Ballu
02
COMPONENTS
Feet
Temperature
probe
Power line
Wall-mounted bracket
Heat outlet
Air intake
handle
*The wall bracket is already installed. You can pull out and detach the
bracket by pressing on the protruding part above the bracket
Do not place or cover
items or clothing on
top of the product!
Do not use in wet
environments, and not
touch the product case,
power cord, plug, etc.
with wet hands!
Do not let children with
delicate skin touch or
trip over the product！
Please keep a distance of
more than 1 meter from
curtains, quilts, newspapers,
03
FOOT INSTRUCTIONS
Wall-mounted
bracket
without using a screwdriver.
2. Carefully turn the main body upside-down on a scratch-free and stable surface. Be
Note:The wall bracket edges may be sharp.It is recommended that if using as a free
standing appliance please remove the wall bracket from the back of the heater
Before you install:
Remove the foot and
thumb screws from the
foam on the side of the
product package
Align the foot with the
of the main body and
turn the included thumb
as possible.
04
WALL MOUNTING INSTRUCTIONS
300mm(12inch)
150mm(6inch) 150mm(6inch)
150mm(6inch)
Note:
1.The appliance must not be located inmediately below a socket outlet.
and any other surrounding parts including other appliances and side walls.At least
3.Do not run the power cord behind the heater.
05
WALL MOUNTED HEATERS
AREONLY TO BE MOUNTED ON
HEATRESISTANT WALLS THAT
COMPLYWITH CURRENT
SPECIFICATIONS & BUILDING
REGULATIONS
WALL MOUNTED
front of orbelow the wall socket. Ensure there is at least 150mm clearance on all
sides of the appliance.
align and insert it, then align the upper hole and push it toward the wall. You can
press down on the protruding part above the bracket so that the bracket slot can
6. Plug appliance into a standard 120 volt AC electrical outlet.
WALL MOUNTING INSTRUCTIONS
250 mm
6.0 mm6.0 mm
6.0 mm6.0 mm
190 mm
hole size and distance
06
OPERATING YOUR HEATER
Temperature control and screen
Display screen
Power Indicator light
℉
℉
℉
Display target temperature
℉,
℉higher
for the product to cool down completely, so that the product can resume
Control Panel
07
OPERATING YOUR HEATER
℉℉
℉℉
℉℉
:
08
Indice
Altri manuali Ballu Stufa
Manuali Stufa popolari di altre marche
Empire Heating Systems
Empire Heating Systems WCC65 Manuale utente
Wetekom
Wetekom 92 86 43 Manuale utente
Desa
Desa SPC170-F Manuale utente
Watlow
Watlow Watrod Electric Tubular Heaters Manuale utente
Haverland
Haverland ECO-DRY GPS Series Manuale elenco delle parti
Stelpro
Stelpro ASILVC2060 Series Manuale utente