Barco R9802352 Manuale utente

ENABLING BRIGHT OUTCOMES

Installation manual

UDX Bottom filter

3R5914789 /00 UDX Bottom filter

1.1 Safety instructions ..........................................................................................................................4

1.2 Safety precautions Hazardous Chemicals ........................................................................................4

About this chapter

Read this chapter attentively. It contains important information to prevent damage to the projector. Ensure that

you understand and follow all safety instructions mentioned in this chapter before installing the bottom filter.

After this chapter, additional “warnings”and “cautions”are given depending on the installation procedure.

Read and follow these “warnings”and “cautions”as well.

Safety 1

R5914789 /00 UDX Bottom filter4

1.1 Safety instructions

WARNING: Before Mounting and removing the bottom filter, disconnect the power to the unit mains

appliance inlet.

Installation personnel

This assembly of the frame and installation of the projector must be performed by authorized and qualified

technical personnel only.

Transportation of the frame

Never transport the multifunctional frame in portrait position with a projector mounted. Failure to do so can

cause damage the multifunctional frame. Refer to Image 1–1for a bad and good example of transportation.

Image 1–1 Transportation method of the frame

This limitation only counts for transportation of a rigging frame with projector mounted. You can

still install the projector in portrait position while in the rigging frame.

1.2 Safety precautions Hazardous Chemicals

Cleansing agent: sodium carbonate crystals (Na2CO3)

Handling the cleansing agent:

•Conserve the product in the original container in a cool, well ventilated place.

•Keep away from Incompatible materials: sources of ignition, direct sunlight.

•Keep container closed when not in use.

•After handling: Wash hands and other exposed areas with mild soap and water.

Personal protection rules:

•Handle the cleansing agent in a well ventilated area.

•Do not eat, drink or smoke during use.

•Wear gloves (Butyl rubber, PVC....) and goggles.

•Wear suitable protection clothing.

WARNING: Before handling Hazardous Chemicals ensure that you have read and understood the

safety instructions provided by the supplier of the chemical in the Safety Data Sheet.

Safety

5R5914789 /00 UDX Bottom filter

Safety Data Sheets for Hazardous Chemicals

For safe handling information on chemical products, consult the Safety Data Sheet (SDS). SDSs are available

upon request via [email protected].

Safety

R5914789 /00 UDX Bottom filter6

Safety

7R5914789 /00 UDX Bottom filter

2.1 Overview .......................................................................................................................................8

2.2 Mounting the filter on UDX with rigging frame....................................................................................8

2.3 Mounting the filter on UDX without rigging frame .............................................................................10

2.4 Maintenance of the filters .............................................................................................................. 11

2.5 Washing and drying the dust filters.................................................................................................12

Bottom filter 2

R5914789 /00 UDX Bottom filter8

2.1 Overview

Purpose of the UDX series bottom filter

The UDX series bottom filters are exclusively designed for the Barco UDX projectors and can thus not be used

on any other equipment.

The filters has are designed to help protect the LDMs present in UDX projectors, while mounted in

environments with polluted air.

Two types of filters

The UDX projectors have several variants in the field, and thus two types of filter have been designed:

Product number R9802352 R9802353

Description Filter for UDX projector with rigging

frame (either with or without

motorization)

Filter for UDX projector without rigging

frame

Kit content Filter holder and three types of filter

pieces (1 piece of each type)

Filter holder and one filter piece

Image of kit content

2.2 Mounting the filter on UDX with rigging frame

Required tools

•Allen wrench 3 mm

•Allen wrench 5 mm

•Allen wrench 6 mm

How to prepare the UDX

1. Place the UDX with rigging frame upside down.

2. If the UDX motorization is installed on the rigging frame, temporary release the Skew actuator from the

rigging frame.

Tip: For detailed instructions on the removal and installation of the skew actuator, refer to the

motorization installation manual (R5906146).

Tip: The filter will be mounted partially underneath the skew actuator. If not removed, the

installation will be quite cumbersome.

Bottom filter

9R5914789 /00 UDX Bottom filter

Image 2–1 Location of the skew actuator

3. Release two of the M8 screws and washers mounted into the bottom of the rigging frame, as indicated in

the following picture (reference 1, Image 2–2). Use a 6 mm Allen wrench.

4. Release two of the M4 screws on the bottom plate of the projector as indicated in the following picture

(reference 2, Image 2–2). Use a 3 mm Allen wrench

Image 2–2 Location of the screws to be removed

5. Place the three filter foam pieces in the appropriate openings, as indicated in the following picture

(Image 2–3).

Bottom filter

R5914789 /00 UDX Bottom filter10

Image 2–3 Placing the filter foam pieces

6. Place the filter frame on the projector bottom plate as illustrated and drive the previously released screws

back in.

Image 2–4

7. If the UDX motorization is installed on the rigging frame, mount back the Skew actuator from the rigging

frame.

Tip: For detailed instructions on the removal and installation of the skew actuator, refer to the

motorization installation manual (R5906146).

2.3 Mounting the filter on UDX without rigging

frame

Required tools

Allen wrench 3 mm

Bottom filter

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Barco Accessori per proiettori

Barco

Barco R762120 Manuale utente

Barco

Barco WGA-510P Manuale utente

Barco

Barco ClickShare CSE-200 Manuale utente

Barco

Barco CM 100 Foglio di istruzioni

Barco

Barco LX-5 SERIES Manuale utente

Barco

Barco ClickShare CSC-1 Manuale utente

Barco

Barco CLICK SHARE CS-100 Manuale utente

Barco

Barco R9861520NA Manuale utente

Barco

Barco D-ILA LX-5 Manuale utente

Barco

Barco F70 Series Manuale utente

Barco

Barco R9829335 Foglio di istruzioni

Barco

Barco CM50 Manuale utente

Barco

Barco ClickShare CS-100 Manuale utente

Barco

Barco LENS QFD(3.4-4.5:1) Manuale utente

Barco

Barco R764081-K Manuale utente

Barco

Barco R9841810 Manuale utente

Barco

Barco BarcoReality 909 Split Pack R9040040 Manuale utente

Barco

Barco DC2K Manuale utente

Barco

Barco R9840680 Manuale utente

Barco

Barco R9841810 Manuale utente

Barco

Barco ClickShare CSE-200 Manuale utente

Barco

Barco F50 Manuale operativo

Barco

Barco QGD(7:1) R9840030 Manuale utente

Barco

Barco R9841770 Manuale utente

Manuali Accessori per proiettori popolari di altre marche

Optoma

Optoma BX-AL133B Manuale utente

PEERLESS

PEERLESS PE 1120 Guida

Osram

Osram SIRIUS HRI Series Manuale

Presentation Switchers

Presentation Switchers PS111 Manuale utente

Kramer

Kramer VIA GO Manuale utente

Yamaha

Yamaha PJL-112 Manuale elenco delle parti

Swedstyle

Swedstyle CL23AA02ZA25E Manuale utente

Mitsubishi Electric

Mitsubishi Electric 236CB Manuale del proprietario

Epson

Epson BrightLink 475Wi Manuale utente

Acer

Acer WP100 Manuale utente

i3 i3board Manuale utente

CHIEF

CHIEF HB-43E Manuale utente

Biamp

Biamp Modena Hub Manuale di servizio

NEC

NEC MP10RX Manuale utente

Panamorph

Panamorph DCR-S3 Manuale utente

Exact solutions

Exact solutions FRAME-EVO-P10 Manuale utente

CHIEF

CHIEF VCM103S Manuale utente

InFocus

InFocus LP70+ Guida