Barista Core All Grind Manuale utente

Core All Grind

User Manual

Contents

Content ...................................................................... 1

Important Safeguards ......................................................... 2

Know Your Core All Grind ......................................................4

Before First Use ...............................................................6

Operating The Core All Grind ...................................................6

Grinding Coffee Beans with the Storage Container ......................................................................................... 6

Grinding Coffee with the Portafilter Attachment and Dispenser ...................................................................... 11

Cleaning And Maintenance .....................................................12

Grind Tips & Settings ..........................................................13

My Grind Settings .............................................................14

Disposal .....................................................................15

Don’t forget to sign up to our Home Brew Coffee Club

for brewing tips, special offers and your warranty.

English

2 3

Important Safeguards

Before using your Core All Grind, the following basic precautions should always be followed including the

following:

1. Read all instructions.

2. Before use check that the voltage of the wall outlet corresponds with the one shown on the rating plate.

3. Do not operate the grinder if it has been dropped or damaged.

4. If the cord or plug is damaged it must be replaced by an authorised service agent or a qualified technician.

Please contact [email protected] for further instructions.

5. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.

6. Please take care when handling the grinder unit head, emptying the bowl and during cleaning.

7. Do not let the cord hang from a table or bench and avoid hot surfaces such as cookers.

8. Do not immerse the Core Grinder in liquid or place in the dishwasher. All components should be wiped clean

only.

9. The Core All Grind should never be used by children and ensure close supervision if it is in use near children.

10. Ensure fingers are kept away from moving parts and do not attempt to remove parts unless the power is

disconnected.

11. Do not remove any components (including the storage and hopper) until the burr grinder has stopped

completely.

12. Do not attempt to operate without the hopper being in place.

13. Do not turn on the grinder until the hopper has been loaded. Running with an empty load can damage the

burr grinder and reduce the lifetime of your grinder.

14. Immediately turn off the grinder if you hear an abnormal sound during grinding, the grinder seems hot

to touch or there is smoke during use. Contact hello@baristaandco.com so guidance from an authorised

service agent can be provided.

15. Ensure the grinder is cleaned on a regular basis and there are no foreign objects in the burr grind

mechanism. Never clean when the power is connected.

16. Do not disassemble, repair or rebuild the burr grinder head unit. If damaged or worn a replacement should

be purchased.

17. Do not plug and unplug the grinder with wet hands or any other wet material such as a cloth.

18. Do not drag, bend or twist the power cord.

19. Do not shake or knock the grinder at any point including cleaning.

20. Check grinding chamber for presence of foreign objects before use.

21. This appliance is not intended for used by persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge.

22. The grinder should only be used to grind coffee at home and is not for commercial use.

23. Do not use outdoors.

24. Misuse and failure to follow the grinder safeguards can cause injury.

English

4 5

Know Your Core All Grind

Control Panel

Button increases the grind

time by 10 seconds

Button decreases the

grind time by 10 seconds

Start / Stop

Ground Coffee Indicator.

10 second increment

1 Main Body

2 Grinder Unit

3 Ground Coffee Container

4 Portafilter Attachment

5 Measure Scoop and

Cleaning Brush

6 Bean Hopper

English

6 7

Grinding Coffee Beans with the Storage Container

Operating The Core All Grind

Before First Use

1. Please recycle all the relevant packaging materials.

2. Remove any dust that may have accumulated during storage and packaging.

3. Rinse the bean hopper and ground coffee container with water and then dry thoroughly.

CAUTION: Never immerse the grinder in water and do not fill the grinder unit with water for cleaning.

1. Place the coffee grinder on a flat surface.

2. Check and make sure that the coffee

channel outlet cover is closed (see Fig.1),

3. Install the grinder unit onto the main body as follows: Firstly, align the “ ” symbol on the grinder unit with

the “ ” symbol on the main body (see Fig.2), then rotate the grinding unit clockwise until the “ ” symbol

aligns with the “ ” symbol (see Fig.3) . If you want to remove the grinding unit, firstly run the grinder to

finish grinding and beans through, then press down the release button and simultaneously turn the unit

anticlockwise to remove from the main body.

Fig.2 Fig.3

NOTE: The grinding unit is equipped with a microswitch

so that it must be assembled in position before operation,

or the appliance will not work.

Release Button

Fig.1

Coffee channel

outlet cover

Visit baristaandco.com or Barista & Co on YouTube

to watch our first use video.

English

4. For bean hopper attachment: Firstly, align the “ ” symbol on the bean hopper with the “ ” symbol on the

main body (see Fig.4), then rotate the hopper clockwise until the “ ” symbol on the hopper aligns with the

“ ” symbol on the main body (see Fig. 5). Reverse this method to remove the bean hopper.

5. Add your desired amount of whole bean coffee to the coffee hopper or to the maximum fill line

(approximately 240g). You can also add whole bean coffee to the hopper when using weighing scales and

then attach to the grinder. The automatic shut off valve will prevent the coffee beans from escaping.

6. If using with the storage container remove the silicone lid and place the storage container on the grinder

base. The opening of the storage container should be directly below the grinder to avoid spillage.

7. Always ensure the storage holder base section of the grinder is clean and free of ground coffee to prevent

abrasion and ensure the storage container fits securely.

8. If using your own storage container ensure it is centered under the grinder outlet.

9. Turn the grind control dial on the grinder to select your desired grind size. Turn left (towards 0) for a finer

grind size and right (towards 40) for a coarse grinder. You can find a grind size guide on page 12.

10. The ground coffee amount is determined by grinding time, therefore, you can press “+” or “-” button to

select your desired grinding time by referring to Table 1. If you do not want to adjust the grinding time, the

appliance will work under the default grind time of one minute.

11. Connect the grinder to your power source, all the indicators will blink three times, then the corresponding

grind time indicator of “ ” lights up.

12. Press the Start/Stop button to start grinding your fresh coffee.

13. When desired grinding time is reached, the coffee grinder will stop working automatically. All the indicators

will extinguish and the grinder will enter into sleep mode if no operation is triggered within 90 seconds. To

reactivate the appliance, press any button.

14. If you would like to grind based on your own time you can use the manual on off button rather than fixed

increments. For those who grind on weight this can be achieved by removing the hopper and using weighing

scales.

15. Turn off the grinder, slide out the storage container and replace the silicone plug for storage or remove the lid

to serve immediately.

Icon

Grind Time

Setting

1 Minute

(Defult)

10 Seconds 20 Seconds 30 Seconds 40 Seconds 50 Seconds

Table 1

Fig.4 Fig.5

English

10 11

IMPORTANT NOTES:

1. The grinder will power down and enter sleep mode after 90 seconds

2. You can press the Stop button at any time during the grinding

3. The grinder should not be used for more than a total of 6 minutes within a 10 minute period. Each grind

should be no more than 90 seconds with a rest after each grind of 90 seconds.

4. If the grinder is left running for 3 minutes it will automatically power down for 30 minutes to prevent over

heating.

5. The maximum capacity is approximately 110g of fine grind coffee, please ensure the container does not

exceed the maximum fill line if adding multiple grinds

Grinding Coffee with the Portafilter Attachment and Dispenser

1. Follow the operations of Step 1-6 of “GRIND COFFEE

BEANS AUTOMATICA LY”.

2. Attach the portafilter cradle.

3. Turn the grind control dial to your desired setting for

espresso.

4. Ensure the machine is plugged into the power supply.

5. Place the portafilter into the cradle and gently push towards

the grinder (see Fig. 6). The indicator “ “ and the

grinder will turn on.

6. When you have your desired amount of ground coffee,

remove the portafilter and the machine will stop grinding.

All the indicators will extinguish, and the machine will enter

sleep mode if nothing is triggered within 90 seconds.

The Core All Grind can also grind directly into a portafilter for espresso brewing. The attachment is stored on the

back of the grinder when not in use. The attachment is triggered when the portafilter is put into the cradle, to stop

simply remove. The grinder also has a removable dispenser allowing coffee to be evenly distributed when using

with portafilters of various sizes.

Top Tip:

The included storage container has UV protection, but we

always recommend storing your coffee in a cool dark place.

Try to grind fresh for the best results.

Fig.6

English

12 13

1. Disassemble the hopper by following the operation on page 7, and then rinse the hopper, ground coffee

container and lid with water.

2. Disassemble the grinder unit by following the operation mentioned on page 7, then detach the ground coffee

outlet cover and clean the residual coffee on the grinder blades with the brush provided. Finally, reattach the

grinder unit.

3. The grinder unit is NOT dishwasher safe

4. Wipe the external body with a damp cloth to clean and leave to dry or use a cloth to dry.

5. Store it in a dry and cool environment.

CAUTION:

Unplug the grinder and allow it to cool before cleaning. To prevent electrical shock the power cord, plug and

electrical grinder unit should not come into contact with water. Do not use water to clean the conical grinder burrs.

Dialing In Your Grind

Many variables, such as temperature, can impact your grind so we suggest using the notes area to mark your

grind settings. You can also expect the burrs to wear over time and you may need to adjust your settings

accordingly and eventually replace the burrs. This is an approximate guide and may vary depending on your coffee

maker and brew preference. The Core All Grind can grind from 250 microns to over 1000 microns with the greatest

consistency between 400 and 800 microns. This means the grinder can be used for espresso and offers even

more consistency for other manual brewers.

For a further guide on micron grinding sizes, ratios, brew time and water temperature please visit the learning

section at baristaandco.com.

NOTE:

Always operate with caution and remember the grinder has sharp moving parts so care must always be

taken when in use and during cleaning.

Troubleshooting

If the grinder stops working, please visit baristaandco.com for troubleshooting suggestions. If the problem

persists, please email [email protected] for authorised dealer and servicing details.

Cleaning And Maintenance Grind Tips & Settings

English

Coarse Grind

Dial Setting: 15- 25

Cafetiere / One Brew /

Brew It Stick

Cold Brew Coarse Grind

Dial Setting: 15- 25

Cold Brew

Medium Coarse Grind

Dial Setting: 10 - 20

Filter / Twist Press

Medium Fine Grind

Dial Setting: 5 - 10

Stovetop

Fine Espresso Grind

Dial Setting: 0 - 5

Espresso Machine

14 15

Disposal

You can help protect the environment! Please remember to respect the local regulations

and hand in any broken electrical equipment to an appropriate waste disposal center.

Coffee Grind

Setting

Date Notes

..................... ................ ..../..../....

................................................................

..................... ................ ..../..../....

................................................................

..................... ................ ..../..../....

................................................................

..................... ................ ..../..../....

................................................................

..................... ................ ..../..../....

................................................................

..................... ................ ..../..../....

................................................................

My Grind Settings

English

Indice

Manuali Macinacaffè popolari di altre marche

SOLAC

SOLAC All4Coffee MC6253 Manuale utente

Teesa

Teesa TSA4011 Manuale utente

Somogyi Elektronic

Somogyi Elektronic home HG KD 40 Manuale utente

tomado

tomado TM-1287 Manuale utente

Aicok

Aicok CG9220 Manuale utente

Zelmer

Zelmer ZCG7925 Manuale utente

Baratza

Baratza Vario Manuale utente

Baratza

Baratza Forté Manuale utente

Isomac

Isomac ROBY Manuale utente

Eldom

Eldom Dott MK60 Manuale utente

Bunn

Bunn SAFETY-FRESH 1 GPR Manuale utente

Baratza

Baratza Forté AP Manuale utente

FAMITEC

FAMITEC BOLD Manuale utente

Santos

Santos SC55 Istruzioni operative

Lumme

Lumme LU-2601 Manuale utente

TREVIDEA

TREVIDEA Girmi MC02 Manuale utente

Eureka

Eureka Zenith E Manuale di istruzioni

Baratza

Baratza Maestro Manuale utente