Basler Vision Technologies BIP-1300c Manuale utente
Basler IP Camera
User’s Manual
Document Number: AW000721
Version: 07 Language: 000 (English)
Release Date: 26 June 2010
Contacting Basler Support Worldwide
Europe and the Middle East:
Basler AG Phone: +49-4102-463-303
An der Strusbek 60 - 62 Fax: +49-4102-463-599
22926 Ahrensburg Email: bc.support.ip.emea@baslerweb.com
Germany
The Americas:
Basler, Inc. Phone: +1-610-280-0171
855 Springdale Drive, Suite 203 Fax: +1-610-280-7608
Exton, PA 19341 Email: bc.support.ip.usa@baslerweb.com
U.S.A.
Asia:
Basler Asia Pte. Ltd Phone: +65-6425-0472
8 Boon Lay Way Fax: +65-6425-0473
# 03 - 03 Tradehub 21 Email: bc.support.ip.asia@baslerweb.com
Singapore 609964
www.basler-ipcam.com
All material in this publication is subject to change without notice and is copyright
Basler Vision Technologies.
Table of Contents
Basler IP Camera i
Table of Contents
1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 About this Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.3 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Accessing the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3 Configuring the Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3.1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3.2 Accessing the Configuration Tools and Camera Parameters. . . . . . . . . . . . . . . . . . . . 10
3.3 Image Control Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.4 Streaming Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3.5 Motion Detection Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
3.6 Alarm Handling Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
3.7 Network Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
3.8 Input / Output Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
3.9 User Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
3.10 System Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
4 Reset Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
5 The Terminal Connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
6 Day/Night Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
6.1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
6.2 IR-Cut Filter Control Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
7 Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
7.1 BIP-640c and BIP1000c Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
7.2 BIP-1300c and BIP-1600c Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
7.3 Stress Test Results. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Revision History. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Table of Contents
ii Basler IP Camera
Introduction
Basler IP Camera 1
1 Introduction
1.1 About this Document
This document is intended for administrative users of the camera. Previous experience with
networking will be a great help when using this document.
This document assumes that you have already followed the instructions in the Basler IP Camera
Installation Guide to install your camera.
Firmware
This document applies to cameras with version 2.0-0 firmware. Cameras with earlier or later
versions of the firmware may have different features than those described here and may look
different when accessed with the Basler Surveillance Web Client.
To ensure that your camera’s functionality is up to date, you should periodically check the
Downloads section of the Basler IP Camera website to see if a firmware update file is available. The
website address is: www.basler-ipcam.com
You can view the current firmware version in a camera, and you can apply a firmware update in two
different ways:
By using the Basler Web Surveillance Client.
After you access a camera using the client (as described in Section 3.2 on page 10), you can
use the Info tab in the System parameters group to view the current firmware version in the
camera (see Section 3.10.1 on page 53).
If you need to update the firmware, you can use the Start Firmware Update button on the
Management Tab in the System parameters group to apply a new firmware file to the camera
(as described in Section 3.10.3 on page 56).
By using the Basler IP Camera Finder software (version 1.4 or higher).
An advantage of the BIP Finder software is that it will let you view the firmware versions on
several cameras at once, and it will let you apply a new firmware file to several cameras
simultaneously.
Refer to the BIP Finder help file for information about how to view firmware versions and how
to update the camera firmware (the help file is a separate file that is included along with the BIP
Finder software).
The Basler IP Camera Finder software is available in the Downloads section of our website:
www.basler-ipcam.com
Introduction
2Basler IP Camera
1.2 Precautions
WEEE Directive
The European Union has enacted Directive 2002/96/EC on Waste Electrical and Electronic
Equipment (the WEEE Directive). This directive is only applicable in European Union member
states.
All Basler IP Cameras have been manufactured after the 31st of August 2005.
WARNING
The camera is not designed for use in an explosive atmosphere.
1. If you use the camera in an explosive atmosphere, it must be enclosed within
an appropriate environmental housing.
CAUTION
Electrical Shock Hazard
Touching the camera’s internal components may result in an electrical shock.
1. Do not open the camera housing. The housing contains no user serviceable
parts.
NOTICE
The camera is not designed for outdoor use and can be damaged by excessively damp or wet
conditions.
1. If you are using the camera outdoors, you should mount the camera in a weatherproof
housing.
Introduction
Basler IP Camera 3
1.3 Overview
RJ-45 Network / PoE - Provides a 10/100 Ethernet connection and can be used to connect
Power over Ethernet (IEEE 802.3af) to the camera.
Terminal Connector - Provides connections for a direct power input to the camera,
connections for the camera’s input and output lines, and connections for a standard RS-232
serial port that can be used to control an external device. See Section 5 on page 65 for
detailed information about the terminal connector.
DC Iris Control - Provides a connection for a DC auto iris.
CS-mount Lens Adapter - Provides a point to mount a CS-mount lens or a C-mount lens on
the camera (a 5 mm extension tube is required with a C-mount lens).
Terminal
Connector
RJ-45
Network / PoE
DC Iris
Control
CS-mount
Lens Adapter
1/4’’
Standard
Tripod
Mount
M3 Mounting Holes
(8 total)
Fig. 1: Camera Connections
Introduction
4Basler IP Camera
Accessing the Camera
Basler IP Camera 5
2 Accessing the Camera
The following instructions assume that you have used the Basler IP Camera Installation Guide to
install your camera and that you know either the IP Address or the host name of your camera.
Your camera can be accessed from most standard operating systems using a web browser. The
recommended browser is Windows™ Internet Explorer 6.0 or higher.
Accessing the Camera From a Web Browser
1. Start your web browser.
2. If you know the IP Address of your camera, type the IP Address into the Address field of your
browser and press the Enter key. For example: http:/172.17.1.44
(If you don’t know the IP address you can find it using the Basler BIP Finder software as
described in the Basler IP Camera Installation Guide.)
If you know the host name of your camera and if your network has a properly configured domain
name server, type the host name into the Address field of your browser and press the Enter key.
For example, for a camera with a host name of Basler-12345678 you would enter:
http://basler-12345678
3. Your browser will connect to the camera’s web server and the Basler Surveillance Web Client
will be displayed. Assuming that the camera is set to the defaults, a live MJPEG video stream
will be displayed in the Live Stream 0 tab as shown below.
Accessing the Camera
6Basler IP Camera
Questo manuale è adatto per i seguenti modelli
7
Indice
