5
Safety instructions
Safety instructions
Proper use
The LED projector is intended for private use and not suitable for commercial purposes. Only
use the LED projector as described in this user manual. Any other use is considered improper
and may result in damage to property.The manufacturer or vendor cannot be held liable for
damages incurred through improper or incorrect use.
WARNING!:A person who has not read and understood all operating and safety
instructions is not qualified to operate this appliance. All users of this appliance must read and
understand this Instruction Manual before operating or cleaning this appliance. When using
electrical appliances, basic safety precautions should always be followed, including:
1. Read all instructions before operating this appliance.
2. This appliance is NOT A TOY.
3. Unsupervised young children and cognitively challenged individuals should never operate this
appliance.
4. To protect against electrical shock do not immerse cord, plug or any part of this unit in water or
other liquids.
5. Unplug from outlet when not in use.
6. DO NOT operate any appliance with a damaged cord or plug, or after the
appliance malfunctions, or if the appliance has been damaged in any manner. Return the
appliance to the nearest repair shop for examination, repair or adjustment. Do not attempt to
replace or splice a damaged cord.
7. The manufacturer does not recommend the use of accessory attachments. DO NOT use outdoors.
8. DO NOT let cord hang over edge of table or counter, or touch hot surfaces.
9. DO NOT place on or near a hot gas or electric burner, or in a heated oven.
10. Always attach plug to appliance first, then plug cord into the wall outlet (for appliances with detachable
cords). To disconnect, turn any control to the off position, then remove plug from wall outlet.
11. This is not suitable for use In the education domain, video playback Is the main function. Not
recommended for Word or spreadsheet.
12. CAUTION!: The user is cautioned that changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate the equipment.
13. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
14. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
15. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
i. Reorient or relocate the receiving antenna.
ii. Increase the separation between the equipment and receiver.
iii. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
iv. Consult the dealer or an experienced radio/TV technician for help.
16. FCC Radiation Exposure Statement
i. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of
20cm between the radiator and your body.
ii. This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
iii. For pluggable equipment, the socket-outlet shall be easily ACCESSIBLE
