1 INTRODUCTION
Congratulations on your choice of a Baumalight
Brush Cutt to complement your brush cutting
operation. This equipment has been designed and
manufactured to meet the needs of a discriminating
buyer for efcient brush cutting.
The unique rotor design reduces the brush
to mulch. Controlling the brush cutter is done
completely from the skid steer providing the ability
for precise control and operator comfort.
Skid steer must have suitable safety equipment
properly installed.
Safe, efcient and trouble free operation of your
Brush Cutt requires that you and anyone else
who will be operating or maintaining the Brush
Cutt, read and understand the Safety, Operation,
Maintenance and Troubleshooting information
contained within the Operator’s Manual.
This manual covers the Baumalight CSC744 and
CSC760 Brush Cutt. Use the Table of Contents as
a guide to locate required information.
Keep this manual handy for frequent reference
and to pass on to new operators or owners. Call
your Baumalight dealer, distributor or the factory
if you need assistance, information or additional
copies of the manuals.
OPERATOR ORIENTATION - The directions left,
right, front and rear, as mentioned throughout this
manual, are as seen from the driver’s seat and
facing in the direction of travel.
1�1 Overview
The cutter is designed to be used by an experienced
operator. Operator must be trained in the safe
operation of a skid steer and hazards related to
using the brush cutter and the safe use of the
brush cutter for the intended purpose. Operators
will require personal protective equipment to
reduce the risk from some hazards that cannot be
completely eliminated or controlled by the design
of the cutter.
Care is required to ensure that the brush cutter will
not come in contact with metallic objects, stones or
other materials.
Brush cutters are not designed for use in
hazardous atmospheres where there is a risk
of re or explosion due to ammable gases or
vapors. Use in hazardous, explosive atmospheres
is prohibited. Serious injury or death of the operator
or bystanders may be caused if cutter is misused.
Misuse may also cause damage to the machine
carrying the cutter.
1�2 Intended Use And Foreseeable
Misuse
1
