Bausch Datacom DinBox GSM M4 Manuale utente
Reference Manual for
DinBox GSM M4
V1.0a
Bausch Datacom NV Tiensesteenweg 6 B-3360 Korbeek-Lo Belgium +32 16 461288
! CAUTION !
ELECTRIC SHOCK HAZARD IF COVER REMOVED
SERVICE BY QUALIFIED PERSONEL ONLY
Bausch Datacom nv 2DinBox GSM M4 V1.0a
1. Introduction
2. Block Diagram
3. S ecifications
3.1 Environmental
3.2 Housing
3.3 Power su ly
3.4 GSM Module
3.5 Ins and outs
3.5.1 Power
3.5.2 Serial Interfaces
3.5.3 Ethernet
3.5.4 Digital In ut
3.5.5 Digital Out ut
3.5.6 SIM Card Reader
3.5.7 GSM Antenna
4. LED Indicators
5. Configuration & Setu
Bausch Datacom nv 3DinBox GSM M4 V1.0a
Bausch Datacom nv 4DinBox GSM M4 V1.0a
1. Introduction
This manual is the reference guide when setting u the "DinBox GSM M4" modem.
This modem has an Ethernet, a RS-232 and a RS-485 interface, 1 digital out ut and 1
digital in ut. It has a built-in ower su ly and an integrated GSM, GPRS, 3G or 4G
module.
U to 5 different ower su ly o tions are ossible to meet all su ly demands.
This modem has an extended TCP/IP stack im lementation, and is able to connect non-
IP devices to an IP network over an Ethernet or GSM/GPRS link.
Thanks to the owerful Cortex M4 rocessor it's ossible to add IP routing and/or
standard RTU rotocols like IEC60870-104 or other customer s ecific rotocol
demands.
The main s ecifications of the “DinBox GSM M4” are:
DIN rail mountable housing
Configuration, setu and monitoring via HTML ages
10 x status LEDs
10/100 Mb Ethernet interface
full RS-232 DCE serial interface
galvanic isolated 2/4-wire RS-485 serial interface
1 x assive galvanic isolated digital in ut
1 x galvanic isolated digital out ut
Sierra Wireless HL6 2G GSM/GPRS module (o tionally 3G or 4G)
SIM card holder (SIM card externally accessible)
SMA antenna connector
owerful Cortex M4 rocessor
2Mb EEPROM [262.144*8 bit]
64Kv FRAM [8.192*8 bit]
Because of the nature of this product and it's field of application, some degree of
technical background knowledge regarding the application and data-
communication is assumed.
Bausch Datacom nv DinBox GSM M4 V1.0a
Bausch Datacom nv 6DinBox GSM M4 V1.0a
2. Block Diagram
The block diagram below details the interconnection of the different functional units
within the "DinBox GSM M4".
Power Su ly
The "DinBox GSM M4" has 5 different ower su ly o tions. Before connecting ower
lease check carefully that the su lied voltage and the wire connection is correct.
PS1 o tion AC isolated 85 – 264 Vac / 100 – 370 Vdc
PS2 o tion DC isolated 18 – 75 Vdc
PS3 o tion DC isolated 9 – 36 Vdc
PS4 o tion DC non-isolated 9 – 57 Vdc
PS5 o tion DC non-isolated 10 – 15 Vdc
There is NO built-in fuse. Power must be rovided via a ro er fuse.
More information about the wire connection, see following cha ters.
Configuration interface
All configuration, setu and monitoring is done via IP - HTML via the Ethernet interface.
Bausch Datacom nv 7DinBox GSM M4 V1.0a
Power
Su ly
Power
In ut
ETH
RS-232
RS-485
LAN WAN
PPPos
GSM
2/3/4G
AT
Command
arser
Praxis
SNMP
client
TCP/IP
Server
IP stack
PPPoS
STM32 F4 – CORTEX M4
DI
DO
10x status LED
GSM Module
The "DinBox GSM M4" has a built-in Sierra Wireless HL6 2G GSM/GPRS module.
O tionally a 3G or 4G GSM module is ossible.
This module will be used to transfer data from/to the CTU or host system. The GSM
module needs a SIM card. The PIN code request can be enabled or disabled. A
standard SMA connection is rovided to connect an external GSM antenna.
Cortex M4 rocessor
The core of the “DinBox GSM M4” is the owerful Cortex M4 rocessor. This rocessor
will/can control the following tasks;
-TCP/IP stack
-RTC (real time clock)
-communication with the Sierra Wireless GSM/GPRS module
-serial RS-485 / RS-232 communication
-calculations on measured or received data
-scan DI changes
-set DO
-write and read data in/from the non-volatile FRAM and/or EEPROM memory
-….
IO
This RTU has 1 DI and 1 DO
1 x DI - galvanic isolated (o tocou ler)
- assive in ut (needs 9 – 25Vdc to activate)
1 x DO - galvanic isolated (o tomos ‘solid state’ relay)
FRAM
The "DinBox GSM M4" has one FRAM (ferro electric RAM) of 64 Kbit (8.192 x 8 bits).
This non-volatile memory can/will be used to store the configuration, measured data and
log information.
EEPROM
The "DinBox GSM M4" has one EEPROM (electrical erasable rogrammable ROM) of 2
Mbit (262.144 x 8 bits). This non-volatile memory can/will be used to store the rogram
code during a firmware u date.
See next cha ter for more technical details.
Bausch Datacom nv 8DinBox GSM M4 V1.0a
3. S ecifications
3.1 Environmental
•O eration tem erature range : -30 ~ +70 °C (*)
(*) The embedded GSM/GPRS module remains fully functional during
and after this tem erature ex osure and shall meet the minimum
requirements of 3GPPP or a ro riate standards.
•Storage tem erature range : -40 ~ +85 °C
•Relative humidity (non condensing) : 5 ~ 95 %
•IP class : IP3x
3.2 Housing
The "DinBox GSM M4" is enclosed into a Bernic Series 1570 housing.
This housing is 9 modules wide and has a DIN rail sna slot for easy DIN rail mounting.
dimensions 157 mm x 86 mm x 58 mm
self-extinguishing according to UL94-V0
maximum tem erature 100 °C
color black (base art) and grey (to art)
Bausch Datacom nv 9DinBox GSM M4 V1.0a
Bausch Datacom nv 10 DinBox GSM M4 V1.0a
1 26
27
62,5 62,5
62,5 dia 6,5
64,7
48,5
[16,2][17,4]
21,8
4,4
40,5
12,3
5
11,4
14,2
12
4,2
[17,3]
605 - 4 in
5mm itch
15
10
605 - 4 in
5mm itch
605 - 2 in
5mm itch
605 - 2 in
5mm itch
SIM card
holder standard
RJ-45
SMA
antenne
10x LED
conductor
3 mm
shielded
RJ-45
Ethernet
with 2 LED's
13
19
6
66
6
dia 3,x ?
Indice
Altri manuali Bausch Datacom Modem
Bausch Datacom
Bausch Datacom Proxima ISDN Lite Manuale utente
Bausch Datacom
Bausch Datacom DinBox PSTN Manuale utente
Bausch Datacom
Bausch Datacom DinBox Manuale utente
Bausch Datacom
Bausch Datacom DinBox RTU M4 Manuale utente
Bausch Datacom
Bausch Datacom InduBox GSM M4 Foglio di istruzioni
Bausch Datacom
Bausch Datacom Vega 56 PC2 Manuale utente
Bausch Datacom
Bausch Datacom InduBox PSTN III Foglio di istruzioni
