BCP SKY5306 Manuale utente
SKY5306
Ver. 1
INSTRUCTION
MANUAL
1800-Watt Electric
Pressure Washer
Before spraying on
intended surface, test spray
in an area free of people
and objects.
WOOD/VINYL
DECK
CARS, BOATS,
MOTORCYCLES
GRILLS, EQUIPMENT,
TOOLS
CEMENT PATIO,
STONE, BRICK
• PRESSURE: Dispense soap on low, rinse on high
• DISTANCE: 6-9 inches away
• SPRAY PATTERN: Fan, left to right, top to bottom
• NOTES: Increase distance on softer woods or if using
direct spray
• PRESSURE: Dispense soap on low, rinse on high
• DISTANCE: 3-6 inches away
• SPRAY PATTERN: Fan, sweeping motion
• NOTES: Increase distance if using direct spray
• PRESSURE: Dispense soap on low, rinse on high
• DISTANCE: 8 inches away
• SPRAY PATTERN: Fan, sweeping motion
• NOTES: Increase distance if using direct spray, wipe dry
• PRESSURE: Dispense soap on low, rinse on high
• DISTANCE: 1-3 inches away
• SPRAY PATTERN: Fan
• NOTES: Increase distance if using direct spray
CLEANING TIPS
4|
Please retain these instructions for future reference.
• Machine is not a toy. Keep out of reach of children.
• Do not allow children to operate this item.
• Machine is intended for household use.
• Use machine on a flat and stable surface.
• Do not leave machine unattended while it is running.
• Safety glasses, hearing protection, boots, and gloves should be worn when operating this machine.
• Wear a respirator or mask if there is a risk of inhaling harmful vapors.
• Before plugging machine into wall outlet, make sure the power switch is o. Switch o machine
before unplugging.
• Turn o and unplug machine before assembly, disassembly, or maintenance.
• Ensure that your voltage is consistent with specifications.
• This machine is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the machine by a person responsible for their safety.
• If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made and/or
factory replacement parts are installed.
• Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
NOTICE
• Immediately turn o in the event of an accident or if machine malfunctions.
• Only use your hand to squeeze the trigger; do not jam the trigger in the ON position.
• Do not bend, twist, or fold the high pressure hose.
• Do not operate machine if under the influence of alcohol or drugs.
• Do not use in rain or a damp location.
• Do not direct high pressure jet at other people, animals, electrical equipment, or the machine itself.
• Do not use machine in the vicinity of other people unless they are wearing protective clothing.
• Do not direct high pressure jet at yourself or others to clean clothing/footwear.
• Do not direct water at fire or hot equipment; hot water or steam is dangerous if reflected back.
• Do not use pressure washer to draw water contaminated with solvents (e.g. paint thinners, gasoline,
oil, etc.).
• Do not use pressure washer to draw hot water, non-water, or flammable liquids.
• Do not allow dirt or debris to be drawn into the machine. Make sure to use a clean water source.
• Do not operate machine without water.
• Position machine so exhaust emissions are not in the vicinity of an air intake.
• Do not immerse in water or allow electrical components to touch water.
• Do not handle power cord/plug or touch wall outlet with wet hands.
• Do not unplug the machine by pulling on the power cord. Always grasp the plug firmly and pull straight
out from the outlet.
• Use with an extension cord is not recommended. If using extension cord, make sure plug and cord are
watertight and designed for outdoor use.
• Do not use if the plug or any components are damaged.
• Do not use any accessory or fitting other than original accessories and fittings.
• Keep machine on a flat surface during moving or installation.
• Always use handle to move or transport machine. Do not move machine by pulling on the hose or
power cord.
WARNING
| 5
HARDWARE
1
8 PCS
M4 x 15mm
SCREW
TOOLS REQUIRED
APPROXIMATELY
10 MIN.
ASSEMBLY
1 PERSON
ASSEMBLY
PHILLIPS
SCREWDRIVER
SPECIFICATIONS
Rated Pressure
Max Pressure
Max Inlet Pressure
Rated Flow
Max. Flow
Rated Frequency
Rated Power Input
Max Water Temperature
1450 psi
2030 psi
174 psi
6.0 l/min
7.0 l/min
50~60Hz
Rate Voltage 120V
1800 W
Sound Power Level 87 dB
104°F
2
1 PC
PRESSURE
HOSE CLIP
PARTS
1 PC
TOP FRAME/HANDLE
1 PC
HOSE REEL
1 PC
1 PC
SPRAY GUN HOLDER
D
2 PCS
HOSE SUPPORT
AB
F
E
1 PC
HOSE HANGER
HOSE REEL HANDLE
C
1 PC
SPRAY GUN
1 PC
LANCE
1 PC
1 PC
INLET CONNECTOR
J
1 PC
HIGH PRESSURE
HOSE
GH
L
K
2 TYPES
QUICK CONNECTORS
CLEANING PIN
I
6|
| 7
DIAGRAM
LANCE
ADJUSTABLE
NOZZLE
SPRAY GUN
TOGGLE LANCE
ROTATION
WATER PRESSURE
COLLAR
SAFETY BUTTON
SPRAY GUN
HOLDER
TOP FRAME/
HANDLE
HOSE REEL
HOSE
HANGER
POWER CORD
HANGER
HIGH PRESSURE
HOSE
INLET
(WITH CONNECTOR)
OUTLET
SOAP
DISPENSER
ON/OFF
SWITCH
POWER
CORD
ACCESSORY
CLIPS
• TOGGLE LANCE ROTATION: Rotate lance to adjust cleaning angle
• WATER PRESSURE COLLAR: Rotate to adjust water pressure low/high
8|
PRODUCT ASSEMBLY
1
2
Insert two part D hose supports into the part B hose reel.
Insert the part C hose reel handle through the part A top frame and into a hose support. Attach
the hose supports to the top frame with four part 1 screws.
B
Dx2
C
A
1x4
| 9
PRODUCT ASSEMBLY
3
4
Attach the top frame with two part 1 screws.
Attach the part E hose hanger with two part 1 screws.
1x2
1x2
E
10 |
PRODUCT ASSEMBLY
5
6
Slide the part F spray gun holder onto the machine.
Screw the part L inlet connector onto the inlet.
F
L
Indice
Altri manuali BCP Idropulitrice
