Beckhoff ZB8610 Manuale dell'operatore
Documentation
ZB8610
Fan cartridge for EtherCAT and Bus Terminals
1.5
2017-08-07
Version:
Date:
Table of contents
ZB8610 3Version: 1.5
Table of contents
1 Foreword ....................................................................................................................................................5
1.1 Notes on the documentation........................................................................................................... 5
1.2 Safety instructions .......................................................................................................................... 6
1.3 Documentation issue status............................................................................................................ 7
2 Product overview.......................................................................................................................................8
2.1 Introduction ..................................................................................................................................... 8
2.2 Technical data .............................................................................................................................. 10
2.3 Mounting and demounting ............................................................................................................ 11
2.4 LED display and connection ......................................................................................................... 17
2.5 Basic Function Principles and Commissioning ............................................................................. 18
3 Appendix ..................................................................................................................................................19
3.1 UL notice....................................................................................................................................... 19
3.2 Support and Service ..................................................................................................................... 20
Table of contents
ZB86104 Version: 1.5
Foreword
ZB8610 5Version: 1.5
1 Foreword
1.1 Notes on the documentation
Intended audience
This description is only intended for the use of trained specialists in control and automation engineering who
are familiar with the applicable national standards.
It is essential that the documentation and the following notes and explanations are followed when installing
and commissioning these components.
It is the duty of the technical personnel to use the documentation published at the respective time of each
installation and commissioning.
The responsible staff must ensure that the application or use of the products described satisfy all the
requirements for safety, including all the relevant laws, regulations, guidelines and standards.
Disclaimer
The documentation has been prepared with care. The products described are, however, constantly under
development.
We reserve the right to revise and change the documentation at any time and without prior announcement.
No claims for the modification of products that have already been supplied may be made on the basis of the
data, diagrams and descriptions in this documentation.
Trademarks
Beckhoff®, TwinCAT®, EtherCAT®, Safety over EtherCAT®, TwinSAFE®, XFC® and XTS® are registered
trademarks of and licensed by Beckhoff Automation GmbH.
Other designations used in this publication may be trademarks whose use by third parties for their own
purposes could violate the rights of the owners.
Patent Pending
The EtherCAT Technology is covered, including but not limited to the following patent applications and
patents: EP1590927, EP1789857, DE102004044764, DE102007017835 with corresponding applications or
registrations in various other countries.
The TwinCAT Technology is covered, including but not limited to the following patent applications and
patents: EP0851348, US6167425 with corresponding applications or registrations in various other countries.
EtherCAT® is registered trademark and patented technology, licensed by Beckhoff Automation GmbH,
Germany
Copyright
© Beckhoff Automation GmbH & Co. KG, Germany.
The reproduction, distribution and utilization of this document as well as the communication of its contents to
others without express authorization are prohibited.
Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a
patent, utility model or design.
Foreword
ZB86106 Version: 1.5
1.2 Safety instructions
Safety regulations
Please note the following safety instructions and explanations!
Product-specific safety instructions can be found on following pages or in the areas mounting, wiring,
commissioning etc.
Exclusion of liability
All the components are supplied in particular hardware and software configurations appropriate for the
application. Modifications to hardware or software configurations other than those described in the
documentation are not permitted, and nullify the liability of Beckhoff Automation GmbH & Co. KG.
Personnel qualification
This description is only intended for trained specialists in control, automation and drive engineering who are
familiar with the applicable national standards.
Description of symbols
In this documentation the following symbols are used with an accompanying safety instruction or note. The
safety instructions must be read carefully and followed without fail!
DANGER
Serious risk of injury!
Failure to follow the safety instructions associated with this symbol directly endangers the
life and health of persons.
WARNING
Risk of injury!
Failure to follow the safety instructions associated with this symbol endangers the life and
health of persons.
CAUTION
Personal injuries!
Failure to follow the safety instructions associated with this symbol can lead to injuries to
persons.
Attention
Damage to the environment or devices
Failure to follow the instructions associated with this symbol can lead to damage to the en-
vironment or equipment.
Note
Tip or pointer
This symbol indicates information that contributes to better understanding.
Foreword
ZB8610 7Version: 1.5
1.3 Documentation issue status
Version Comment
1.6 - Update chapter “Commissioning”
1.5 - Update chapter “Technical Data”
1.4 - Update chapter “Technical Data”
1.3 - Update chapter “Basic Function Principles and Commissioning”
1.2 - Addenda
1.1 - Addenda
1.0 - Addenda, 1st public issue
0.1 - first provisional documentation for ZB8610
Product overview
ZB86108 Version: 1.5
2 Product overview
2.1 Introduction
Fig.1: ZB8610
Fan cartridge for EtherCAT and Bus Terminal
The ZB8610 fan cartridge is used for forced ventilation within the terminal housing and ensures better heat
dissipation from the housing. It extends the thermal operating range of EtherCAT Terminals (ELxxxx) and
Bus Terminals (KLxxxx) and offers a wide range of new application options. The cartridge is installed on the
underside of the terminal segment and covers a width of four standard terminals (4 x 12 mm). It consists of
the fan, an installation plate, a terminal strip (24 V DC, 0 V DC, diag, mode) and a bracket for fixation on
different terminal housings (see fig. “Components ZB8610”).
Product overview
ZB8610 9Version: 1.5
Fig.2: Components ZB8610
Product overview
ZB861010 Version: 1.5
2.2 Technical data
Technical data ZB8610
Number of channels 1 fan
Nominal voltage 24 V DC (-15 %/+20 %)
Current consumption
(at 24 V operating voltage)
ca. 45 mA
Operating modes temperature-controlled, full speed, frequency-
controlled
Rotational frequency fan adjustable in 9 steps via frequency (1…9 Hz), max.
~5,500rpm
Diagnostics,
max. output current
fan fault,
15mA
Life span MTBF typ. = 280,000 h @ 20 °C
Special features increased performance and extended temperature
range for various terminals
Dimensions (W x H x D) 47 mm x 22 mm x 55 mm
Weight 32 g (incl. bracket)
Operating/storage temperature -25…+70 °C/-40…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/see chapter “Mounting/Demounting [}11]”
Approval CE
cULus [}19]
Indice
