Behringer Bass V-Amp Pro Manuale utente

Behringer Bass V-AMP Pro – Quick Start Guide

Author: CharlieC, TalkBass.com Registered User

Revised: 2/28/2011

Source: http://www.talkbass.com/forum/showthread.php?t=687422

Introduction

This document should help you take control of Behringer’s Bass V-AMP Pro unit and

allow you to truly hear what it sounds like when properly and plainly configured.

Connections

Connect your instrument to the V-AMP's front panel input jack.

Connect either one of the V-AMP's ANALOG LINE OUTPUTS to your amp/combo’s

POWER AMP IN or EFFECT RETURN jacks. *

You should now be in full control of your volume level with just the V-AMP's MASTER

volume knob.

* Connecting this way best ensures that no further tone coloring is added to what

the unit outputs on its own.

Set Operating Mode

Goal: Set unit to L3 mode, flatten the LIVE EQ, and maximize MASTER INPUT GAIN

1. Enter CONFIG mode by pressing the [D] + [E] buttons simultaneously

2. Press the [>] button until L3 is displayed on the front panel

3. Set BASS, MID + TREBLE to 12 o’clock

4. Press and hold the TAP button, GAIN knob now lights up

5. Spin the GAIN knob all the way up **

6. Release the TAP button

7. Exit CONFIG mode by pressing the [TUNER] (EXIT) button

** The default master gain for the unit is set at 50%. This is very inadequate for

most basses. The built-in tuner will work poorly and the amp models will be gain-

starved if this were not adjusted. Should your bass have a really hot or active

output then it is suggested that you find a lower setting that works best for the

V-AMP and your tone goals.

Select Patch 1A

Goal: Select patch 1A as the current patch

1. Press the [<] button until numeral 1 is displayed on the front panel

2. Press the [A] button

Roll Your Own Tone

Goal: Pick an amp model, flatten all controls, save your tone, tweak, rock + repeat

1. Spin the AMP knob and select ROCK CLASSIC (Ampeg SVT)

2. Set GAIN to 2 o’clock

3. Set VOLUME, BASS, MID, TREBLE to 12 o’clock

4. Turn off COMPRESSOR + EFFECTS, spin them all the way down

5. Press and hold the [TAP] button to access the secondary parameters *

6. Spin BASS, MID, TREBLE + EFFECTS to 12 o’clock

7. Release the [TAP] button

* Secondary params are DEEP, SHIFT, PRESENCE, ATTACK, 2ND PARAMETER

Turn-off everything that would secretly spoil the quality of the current patch

1. Press [<] + [>] buttons simultaneously to enter EDIT mode

2. Press [A] button (MIDI) and then press [<] until numeral 1 is displayed

3. Press [B] button (DRIVE) and then press [<] until “--“ is displayed

4. Press [C] button (CABINETS), turn both BASS + TREBLE knobs to 12 o’clock

5. Press [D] button (X-OVER) and then press [<] until “--“ is displayed

6. Press [E] button (DENOISER) and then press [<] until “--“ is displayed

7. Exit EDIT mode by pressing the [TUNER] (EXIT) button

Test drive the ROCK CLASSIC amp model

1. Plug in your bass guitar, start playing, set MASTER volume

2. Ride the BASS knob until you’re moving some air

3. Tweak GAIN, BASS, MID, TREBLE, + COMPRESSOR knobs until satisfied

4. Save tone to Patch 1A (Press and hold the [A] button for about 3-seconds)

Moving Forward

1. Pick another AMP model

2. Season to taste

3. Save tone to Patch 1B (Press and hold the [B] button for about 3-seconds)

4. Press [A] to return to Patch 1A

You should be all set now from here! :-)

Altri manuali per Bass V-Amp Pro

Indice

Altri manuali Behringer Amplificatore

Behringer

Behringer POWERPLAY PRO A4400 Manuale utente

Behringer

Behringer ULTRA-DI DI100 Manuale utente

Behringer

Behringer EUROPOWER EPQ900 Manuale utente

Behringer

Behringer Bass V-Amp Manuale utente

Behringer

Behringer EUROPOWER EPX2000 Manuale utente

Behringer

Behringer FCA1616 Manuale utente

Behringer

Behringer DIGITAL SNAKE SD16/SD8 Manuale utente

Behringer

Behringer TUBE ULTRAGAIN MIC300 Manuale utente

Behringer

Behringer Tube Ultragain T1953 Manuale utente

Behringer

Behringer Microamp HA400 Manuale utente

Behringer

Behringer ULTRABASS BXD3000H Manuale utente

Behringer

Behringer POWERPLAY HA8000 Manuale utente

Behringer

Behringer EUROPOWER EP4000 Manuale utente

Behringer

Behringer SHARK FBQ100 Manuale utente

Behringer

Behringer Ultrabass BX600 Manuale utente

Behringer

Behringer ULTRABASS BX1800 Manuale utente

Behringer

Behringer U-PHORIA UMC204HD Manuale utente

Behringer

Behringer iNuke NU6000 Guida all'installazione

Behringer

Behringer KM1700 Manuale utente

Behringer

Behringer Ultraroc GX110 Manuale utente

Behringer

Behringer Ultrabass BX4210 Manuale utente

Behringer

Behringer Miniamp AMP800 Manuale utente

Behringer

Behringer ULTRA-DI DI100 Manuale utente

Behringer

Behringer Vintager AC112 Manuale utente

Manuali Amplificatore popolari di altre marche

ASTRO

ASTRO HVO V40 P Manuale utente

Marantz

Marantz SUPERSCOPE BLA-545 Istruzioni per il montaggio

NAD

NAD CI980 Manuale utente

Technics

Technics SE-CH770 Manuale utente

Harman Kardon

Harman Kardon HK6300 Manuale utente

NAD

NAD T975 Manuale utente

McIntosh

McIntosh MA6850 Manuale utente

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuale utente

Viatron

Viatron Autrix Manuale utente

GME

GME GA9800 Manuale utente

Atlas

Atlas CP700 Manuale utente

Roland

Roland KC-1000 Manuale utente

Pyle

Pyle PFMRA350BW Manuale utente

Advantage

Advantage S-250 Manuale utente

IRT Electronics

IRT Electronics DVA-3007 Manuale utente

Dimavery

Dimavery BA-100 Series Manuale utente

Sony

Sony XM-S400D Manuale utente

Schertler

Schertler ROY X Manuale utente