V· ..
SHOWING A FULL SLIDE CUBE CARTRIDGE
To install a full cartridge, just place
it in the rear portion of the Slide
Cube Recess, check that the
platform of the Slide Collection
Chamber is down, then slide the
cartridge forward. Switch the pro-
jector on and start the shawl Use
the cartridge's identification label
to list the subjects and the dates.
Almost any type of pen or soft
marking pencil can be used.
When you change to a new car-
tridge, just focus the first slide
with the Lens Focus Ring-the
rest will focus automatically
I
It's not necessary to project every
slide in your cartridge. To "scan"
through your slides and project
just the desired ones, hold the
Slide Advance down until the slide
you want passes the Previewer-
then quickly release the button.
You'll now have your selected
slide on the screen. None of the
other slides were shown. This is
also a good way to preview a full
cartridge quickly.
7
The "recall" feature lets you bring
back and project the slide that has
just been shown. To recall a slide,
just move the Forward/Recall
Switch to RECALL and push the
Slide Advance down once. Then
return switch to the FORWARD
position.
IMPORTANT Only one slide
(last one projected) can be
recalled, not a full series. Slide
advance locks until switch is
returned to FORWARD.
