BenQ PT01 Manuale utente
Version: 1
Keep this user manual for future references.
PT01 User Manual
Table of contents2
Ta b l e o f c o n t e n t s
Shipping Contents........ 3
Product Overview........ 4
About PT01 ...............................................4
Dimensions ................................................4
Preparation for Setup.. 5
Environment Condition...........................5
Surface Condition .....................................6
Projector Requirements..........................9
PT01 Installation......................................10
Connecting PT01 ....................................12
PT01 Laser Curtain ... 13
Adjusting PT01.........................................13
Driver Installation...... 14
Configuration
Setting......................... 15
Alignment
Instructions................. 17
Alignment View .......................................17
Using the Alignment Masks...................18
PointWrite
Calibration.................. 20
Specifications.............. 22
Shipping Contents 3
Shipping Contents
The PointWrite touch module is a touch transmitter for the BenQ
PointWrite interactive projector. To use the touch module, please find the
standard accessories below and follow this manual.
1. PointWrite Touch Module PT01
2. Installation CD: CD contains PointWrite touch driver, QWrite software
and user manual.
3. Quick Start Guide: Shortcut of how to use the PointWrite touch
solution.
4. Dummy pen with pen nibs: 2 extra pen nibs for dummy pen.
5. Mini USB Cable: Connect to supply power to the touch module.
6. Alignment masks: For laser curtain alignment.
7. Wrist strip x 2
8. Tape x 2
9. Hex key: For laser curtain adjustment
123
PointWrite Touch
Module
Installation CD Quick manual
456
Dummy pen with pen
nibs x 2
Mini USB cable Alignment masks
789
Wrist strip x 2 Tape x 2 Hex key
Digital Projector
Quick Start Guide
Product Overview4
About Dummy Pen
When replacing the pen nib on the dummy pen, take it from the dummy pen.
Product Overview
About PT01
Right View
Dimensions
For better touch performance, keep the pen nib clean.
When replacing the pen nib, take it
from the dummy pen.
Front View Rear View
Cover
Top screw
Left screw Right screw
Attach tape area
Touch module head
Mounting
hole
Mounting
hole
USB port
178.85mm
58.09mm
40.10mm
Preparation for Setup 5
Preparation for Setup
Environment Condition
The PT01 touch module functions with an PointWrite interactive projector
for scalable finger touch functionality, transforming any flat surface into a
virtual interactive whiteboard.
For optimal finger touch quality, follow these guidelines:
1. Close all window curtains.
2. Select a projection area away from direct sunlight to prevent writing
interference.
3. Keep infrared devices, such as: infrared microphones, away from the
front side of the screen to prevent interference.
4. Remove accessories, such as: watches or necklaces, with a reflective
surface to prevent interference.
Touch area
Touch area Touch area
Preparation for Setup6
Surface Condition
Optimal finger touch quality is dependent on the selected surface condition.
You can attach the touch module on a wall surface or existing board. It is
important to choose a smooth and flat surface area free of protrusions.
In the event of a projection surface not conducive to finger touch
functionality, select the PointWrite pen as the pointing method for the
classroom.
Selecting a Wall Surface
• Select a wall that is straight and flat, without any protruding objects on it.
• Writing directly on the wall with the pen can damage the wall. Test the
wall surface by writing on it with the dummy pen before you install the
touch module.
Using on the Wall Surface
Consider the following factors when selecting a wall surface to project your
image onto:
• Project on a smooth, semi-gloss painted surface to reduce glare from the
projector, to achieve optimal touch quality and to reduce wear on the pen
nib.
Using on a Dry-erase Board
• Attach a dry-erase board to the wall if you’re projecting on a textured
surface. A dry-erase board is a flat surface that works well with your
interactive projector and allows you to write smoothly in digital ink.
Preparation for Setup 7
Measuring the Flatness of the Surface
1. Place a six-foot carpenter’s level horizontally across the projection area
(board).
2. Locate the point on the level furthest away from the projection area.
3. Measure the surface flatness on both sides of the projection area.
• Overall finger touch performance is influenced by the flatness of the
projection surface.
• A flatness variance of 2mm in any direction ensures optimal finger touch
performance.
<2mm <2mm
<2mm <2mm
Preparation for Setup8
Surface Obstructions
Maintain the projection area clean and free of obstructions. The following are
common obstruction examples:
• Cables or wires that hang into the projected image.
Leave extra space between the cables and the projected image so you can
make image adjustments later.
Preparation for Setup 9
Projector Requirements
The PointWrite touch module is only available for BenQ PointWrite series
interactive projector. Make sure the PointWrite camera module is installed
properly before you setup the PointWrite touch module.
For more information, please refer to the PointWrite camera module User
Manual or Quick Guide when installing.
1 2
Preparation for Setup10
PT01 Installation
Screen Tolerance
The ambient light or directly sun light is possible to impact the screen size of
touch area or cause interference.
In this case, make screen size smaller or turn to pen mode with PointWrite
pen for better writing quality.
# Item Specification
1 Horizontal Position Center Line of beamed screen.
2 Vertical Position Ceiling Mounting: Top of the screen with Gap.
Table Mounting: Bottom of the screen with Gap.
3 Gap Min: 50mm, max: 100mm, normal: 70mm
4Orientation Head of laser module should be face to touch
screen.
5TouchArea Min: 65”, max: 100” (without external lighting
interference)
Center line of touch area
PT01 touch module
Frame
Surface
Touch area
50-100mm
50mm
50mm 50mm
Indice
Altri manuali BenQ Accessori per proiettori
BenQ
BenQ InstaShow WDC10T Manuale utente
BenQ
BenQ WDC10 InstaShow Guida di riferimento rapido
BenQ
BenQ 0.4 Wall Mount-WM04G3 Manuale utente
BenQ
BenQ LH856UST Manuale utente
BenQ
BenQ InstaShow S Manuale utente
BenQ
BenQ InstaShow WDC10TC Manuale utente
BenQ
BenQ Ceiling Mount-CM00G2 Manuale utente
BenQ
BenQ PointWrite PW31U Manuale utente
BenQ
BenQ WM04G4 Manuale utente
BenQ
BenQ InstaShare Manuale utente
BenQ
BenQ 0.4 Wall Mount-WM04G3 Manuale utente
BenQ
BenQ InstaShow WDC10R Manuale utente
BenQ
BenQ InstaShow VS20 Manuale utente
BenQ
BenQ WDC20C Manuale utente
BenQ
BenQ PointWrite Manuale utente
BenQ
BenQ LX710 Manuale utente
BenQ
BenQ PointWrite PW30U Manuale utente
BenQ
BenQ 0.3 Wall Mount Manuale utente
BenQ
BenQ InstaShow X Manuale utente
BenQ
BenQ 0.3 Wall Mount-WM03G2 Manuale utente
