BenQ SNS21 Manuale utente
1
Safety precautions Getting started Screen assembly Screen mounting
Digital Projector
Installation Guide
Ambient Light Rejecting Screen | SNS21
IMPORTANT
To install the product properly,
you are strongly recommended
to follow the steps and safety
precautions in this document.
V 1.00
How-to video
Installation guide
2
Safety precautions Getting started Screen assembly Screen mounting
Topics
Safety precautions
The screen frames may be sharp. Hold the
parts carefully to avoid possible personal
injury or damage to the floor/product.
Make sure the wall for screen mounting
is stable enough to support the weight of
your ambient light rejecting (ALR) screen.
Never fold the screen material. Avoid
any scratches or wrinkles on the screen
material.
To protect the screen, always wear gloves
before touching or moving the screen
material.
Installation tips
Fix all screws halfway so you can make
adjustments easily. Tighten all screws after
adjustments.
Use appropriate tools to fix different
screws.
Fix screws halfway Tighten after adjustment
K
L
M
Q
R
Q
2
2
3
5
12
15
15
Safety precautions
Installation tips
Getting started
Screen assembly
Wall mounting
Screen cleaning
Product support
3
Safety precautions Getting started Screen assembly Screen mounting
Note
• In the illustrations of this document, steps to complete a task are numbered with 1, and order of
installation is marked with
1
.
• Items in the package are labeled and mentioned by English letters.
• Illustrations in this document are for reference only. The actual content may vary by the product
supplied for your region.
Getting started
1Prepare the installation space. It should be at least 450 cm x 260 cm with a blanket to protect your floor.
Blanket for protection
177.16” (450 cm)
102.36”
(260 cm)
2Open the package. Start with reading the installation guide. Do not roll out the screen material yet.
Installation
Guide
Installation
Guide
3
Most of the package contents are inside the rolled screen material. Take package contets out. Be
careful not to fold or scratch the screen material.
4
Safety precautions Getting started Screen assembly Screen mounting
4Check all package contents.
All package contents
E
G
A
H
E
D IF BB FI D
J
C C
C C
G
A
H
Kx 30 P x 4 U x 2
Lx 24 Q x 2 V x 8
Mx 26 R x 1 Level x 1
Nx 26 S x 2
Installation
Guide Installation
Guide
x 1
Ox 1 T x 2
5
Safety precautions Getting started Screen assembly Screen mounting
Screen assembly
Box contents for screen assembly
No. Name Picture Quantity
A Long inner frame 4
B Short inner frame 2
C Bracket 4
D Long fiberglass rod 2
E Short fiberglass rod 4
F Long edge trim 2
G Short edge trim 4
H Long outer frame 4
I Short outer frame 2
J Center support bar 1
K M5 x 10 screw 30
L M4 x 4 screw 24
MM4 x 60 screw with washer and
spring 26
N Nuts 26
O Screen material 1
P Corner sleeve 4
Q 3mm hex wrench 2
R Phillips screwdriver 1
S Gloves 2 pairs
6
Safety precautions Getting started Screen assembly Screen mounting
1. Inner frame assembly.
A
J
A
B
C C
C C
B
3
3
22
4
22
13
31
Connect the left and right parts of the long
inner frame (A). Fasten them with three M5x10
screws (K).
Complete the inner frame assembly of two
long sides.
1
Insert the bracket (C) to the short inner frame
(B). Fasten them with two M5x10 screws (K).
Complete the inner frame assembly of two
short sides.
2
A
A
K
K
C
B
7
Safety precautions Getting started Screen assembly Screen mounting
Align the short inner frame (B) with the brackets (C) on both ends to the long inner
frames (A) together. Fasten them together with M5 x 10 screws (K). Follow the
illustrations to install the other short side and make the inner frame a square.
B
3
Align the center support bar (J) to the screw holes on the upper and lower inner
frames. Fasten the center support bar (J) with M4 x 4 screws (L).
4
5The inner frame is a square now. Leave it aside and free the space for screen material
installation.
L
L
A
J
A
A
BK
A
8
Safety precautions Getting started Screen assembly Screen mounting
2. Screen material installation.
1
Wear the gloves (S) to protect the screen surface.
2
Roll out the screen material together with the protection of the supplied nonwoven
sheet carefully. The front side of the screen material is facing downwards. It should
be protected by the protection sheet at all times. Do not remove the UP sticker from
the back of the screen material. You will need the indication of the right screen
direction during installation.
UP
3
3
3
4
3
3
34
4
44
4
O
F FD D
G
G
E
E
Insert the fiberglass rods (D & E) through the
openings on the screen material edges. Follow
the illustration to complete the long and the short
sides.
D & E
O
3
Snap the edge trims (F & G) to the screen material
edges to hold the screen material and the
fiberglass rods together. Follow the illustration to
complete the long and the short sides.
4
D & E
F & G
O
How-to video
Screen assembly
9
Safety precautions Getting started Screen assembly Screen mounting
5While the screen material is still placed and facing downards on the floor, place the assembled inner
frame gently on top of the screen material. Adjust the edge trims (F & G) so they are alignted with the
inner frame on the same side.
UP
6
Insert nuts (N) to the edge trims as illustrated. Insert the number of nuts to each side as specified in the
illustration. That will be 8 nuts on each long side, and 4 nuts on each short side. Slide the nuts evenly to
align with the screw holes inside each inner frame as illustrated by the circles.
N x 8
N x 4
UP
N x 8
N x 4
NF & G
O
N
F & G
O
7Flip the trims back towards the inner frame.
UP
10
Safety precautions Getting started Screen assembly Screen mounting
8Fix the inner frame with the edge trim using the M4 x 60 screws (M). The screws should be fixed from
the screw holes inside the frame all the way out to the nuts just inserted into the edge trims. Follow the
order specified in the illustration to complete fixing 24 screws. Start from the middle of each side (as
indicated by
1
~
24
) in order to stretch the screen material properly.
Note
A standard set of M4 x 60 screw (M) comes with a
screw, a washer and a spring. Check and remove the
cap before use.
UPUPUP
1 2 12 18 23111724
4 3 9 19 22102021
13
7
8
14
16
6
5
15
9Lift the screen material and the frame carefully without touching the screen surface. Check if the screen
material is properly stretched.
To adjuist the stretch, work from the screws.
Once the adjustment is done, lay down the screen gently facing downward again (with the protection of
the supplied nonwoven sheet). Secure all screws.
Indice
Altri manuali BenQ Proiettore
BenQ
BenQ MH684 Manuale utente
BenQ
BenQ MW870UST Manuale utente
BenQ
BenQ Portable Entertainment Series Manuale utente
BenQ
BenQ DX832UST Manuale utente
BenQ
BenQ MP620P-XGA Manuale utente
BenQ
BenQ Home Entertainment Series Manuale utente
BenQ
BenQ Home Entertainment Series Manuale utente
BenQ
BenQ MS630ST Manuale utente
BenQ
BenQ MX520 Manuale utente
BenQ
BenQ MX613ST Manuale utente
BenQ
BenQ W7500 Manuale utente
BenQ
BenQ W7000+ Manuale utente
BenQ
BenQ MX514 Manuale utente
BenQ
BenQ MS504 Manuale utente
BenQ
BenQ MW855UST+ Manuale utente
BenQ
BenQ MP782 ST Manuale utente
BenQ
BenQ HT5550 Manuale utente
BenQ
BenQ W703D Manuale utente
BenQ
BenQ MX806ST Manuale utente
BenQ
BenQ MW811 ST Manuale utente
