BenQ SP0005 Manuale utente
SP0005 / SP0008 / SP0016
5/8/16-Port
Fast Ethernet Switch
User’s Guide
FCC Warning
This equipment has been tested and found to comply with the limits for Class
A & Class B digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a residential environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with this user's guide, may cause harmful interference
to radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
CE Mark Warning
This device complies with requirements of EN50081-1 and EN50082-1 under
the scope of EMC Directive EEC.
Trademarks
Copyright ©2002 Benq Corporation.
Contents subject to change without prior notice. Benq is a registered trade-
mark of Benq Corporation. All other trademarks belong to their respective
proprietors.
Copyright Statement
No part of this publication may be reproduced in any form or by any means
or used to make any derivative such as translation, transformation, or adapta-
tion without permission from Benq Corporation.
i
1. Introduction .............................................................................. 1
1.1. Product Overview .............................................................................. 1
1.2. Features & Specifications ................................................................... 2
1.2.1 Features ..................................................................................................... 2
1.2.2. Technical Specifications ......................................................................... 2
1.2.3. Physical Specifications ............................................................................ 3
1.3. Product outlook and terminology ................................................... 4
1.3.1. SP0005 ....................................................................................................... 4
1.3.2. SP0008 ....................................................................................................... 5
1.3.3. SP0016 ....................................................................................................... 6
1.3.4. Terminology ............................................................................................. 6
1.4. Package contents ................................................................................. 7
2. Installation ................................................................................. 8
2.1. Operating Environment ..................................................................... 8
2.2. Connecting to network devices ...................................................... 8
2.3. Connecting the power ....................................................................... 8
3. Trouble Shooting ..................................................................... 9
ii
1. 緒論 ..........................................................................................10
1.1. 產品簡介 ........................................ 10
1.2. 特性 &規格 ......................................................................................... 11
1.2.1 產品特性 ..................................................................................................11
1.2.2. 技術規格 .................................................................................................11
1.2.3. 外觀規格 .................................................................................................12
1.3. 產品外觀及術語 ................................................................................ 13
1.3.1. SP0005 ......................................................................................................13
1.3.2. SP0008 ......................................................................................................14
1.3.3. SP0016 ......................................................................................................15
1.3.4. 術語 ..........................................................................................................15
1.4. 產品包裝 ........................................ 16
2. 安裝 ...........................................................................................17
2.1. 工作環境 .............................................................................................. 17
2.2. 網絡連接 .............................................................................................. 17
2.3. 連接電源 ......................................... 17
3. 故障排除 ..................................................................................18
1. Introduction - 1
1. Introduction
1.1. Product Overview
This SP0005/SP0008/SP0016 high performance Fast Ethernet switch provides
five/eight/sixteen Fast Ethernet ports to segment network traffic, extend Fast
Ethernet connection distance, and convert data packets between different
transmission speeds. This Fast Ethernet Switch provides shielded RJ-45 ports
both with 10Base-T and 100Base-TX Auto-negotiation capability and MDI/
MDI-X auto crossover. All ports in this switch support Full-Duplex and Half-
Duplex operation modes. The Fast Ethernet Switch is typically used to seg-
ment network traffic that can improve the network performance by increas-
ing the total bandwidth as illustrated in Figure 1-1.
This Fast Ethernet Switch utilizes stored-and-forward switching architecture
that filters and forwards data after the complete data packet is received and
examined to be free of errors. With one set of status LEDs for each individ-
ual port, the switch operation status can be easily monitored. Their slim and
compact design allows direct placing on the desktop or conveniently
mounted on the wall or the side of a desk to accommodate cabling consider-
ation.
Figure 1-1
ADSL/Cable modem
Linux OS
Mac OS
Server
Windows Me/XP/NT
Windows 98/95/2000
1. Introduction - 2
1.2. Features & Specifications
1.2.1 Features
• Compliant with IEEE 802.3 10Base-T Ethernet and 802.3u 100Base-TX Fast
Ethernet Standards.
• Provides 5/8/16 ports for 10Base-T/100Base-TX, standard RJ-45 connectors.
• All RJ-45 ports supports 10Base-T/100Base-TX and Full-Duplex/Half-Duplex
Auto-negotiation function.
• Supports MDI/MDI-X auto crossover.
• Supports store-and-forward switching mechanism.
• Plug-and-Play
• Performs non-blocking full wire speed rate.
• Supports up to 4K/2K/8K (5/8/16 ports) MAC addresses table / hashing
algorithm on address learning.
• Supports Aging function and 802.3x flow control for full Duplex and
collision-based backpressure function for half duplex operation.
• 128K/128K/512K (5/8/16 ports) Bytes buffer memory.
• Automatic address learning, address aging and address migration.
• Simple and economical way to bridge 10Base-T network and 100Base-TX
network.
• Front panel status LEDs
• Desktop size.
• Wall mountable.
1.2.2. Technical Specifications
Ethernet Standards IEEE 802.3 10Base-T, 802.3u 100Base-TX
LED report
Power Steady Power On
Off Power Off
100 M
(Green)
Steady (LNK) A valid network connection established
Flashing (ACT) Transmitting or receiving data
10 M
(Yellow)
Steady (LNK) A valid network connection established
Flashing (ACT) Transmitting or receiving data
Cable 10Base-T: 2-pair UTP Cat. 3,4,5, up to 100m (328 ft)
100Base-TX: 2-pair UTP Cat. 5, up to 100m (328 ft)
Switching Method Store-and-forward
Forwarding Rate 14,880pps for 10Mbps; 148,800pps for 100Mbps
1. Introduction - 3
1.2.3. Physical Specifications
AC Input 50-60Hz, External power adapter
Operating Temperature 0°C
~ 50°C (32°F ~ 122°F )
Storage Temperature -20°C ~ 70°C (-4°F ~ 158°F )
Humidity 10% ~ 90% non-condensing
Emission Compliance
FCC part 15 Class B, CE Mark, VCCI Class B, C-TICK
for SP0005 & SP0008
FCC Class A, CE Mark, VCCI Class A, C-TICK
for SP0016
Safety UL/CSA
Dimension
162mm x 103mm x 32mm (SP0005)
162mm x 103mm x 32mm (SP0008)
301mm x 125mm x 32mm (SP0016)
Net Weight 250g (SP0005); 250g (SP0008); 540g (SP0016)
1. Introduction - 4
1.3. Product outlook and terminology
1.3.1. SP0005
Top View
Front View
Rear View
WIDTH * DEPTH * HEIGHT = 162*103*32 mm
1. Introduction - 5
1.3.2. SP0008
Top View
Front View
Rear View
WIDTH * DEPTH * HEIGHT = 162*103*32 mm
1. Introduction - 6
1.3.3. SP0016
1.3.4. Terminology
PWR:
This Green LED lights when the power adapter is mounted
LINK/ACT 10/100:
The Yellow LED lights when there is a valid 10-Base data linked on the port.
And Green LED lights for 100-Base data linked. LED lights blinking when
either 10-Base or 100-Base data is transmitted.
Top View
Front View
Rear View
WIDTH * DEPTH * HEIGHT = 301*125*32 mm
Altri manuali per SP0005
1
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali BenQ Interruttore
