OPERATIONS FROM TOUCH KEYPAD
The M-Touch keypad with its ample display enables
graphic presentation of system information. Then the
display is touch-sensitive so is easy and intuitive to
interact with.
In standby the keypad can display information shown in
Figure 1 and described below.
+Information shown by the keypad in standby de-
pends on operations programmed by the installer
(option EN50131 enabled or disabled): ask your in-
staller for more information.
1) Status Bar This area can show the following mes-
sages (with decreasing priority):
ØSystem in Alarm, above a red bar, in an alarm;
ØAuto-arm in, above an orange bar, if the system is
about to be armed by the time scheduler;
ØLabels of open zones, above a grey bar, of zones
with the option Active on Keypads enabled (ask the
installer for more information).
2) Signals Icon This area can show the following
icons, if the EN50131 option is disabled (with decreas-
ing priority):
Øfixed, in an alarm;
Øfixed, with tampering or fault;
Øblinking, with an alarm memorised;
Øblinking, with tampering or a fault memorised;
Øfixed, with zones bypassed.
3) SMS not read This icon is displayed when there
are unread SMSs: the number above the icon indicates
the number of messages not read. Read “GSM/IP > Re-
ceived SMS” for more information.
4) Time and Date This area displays the current time
and date: read “Settings > Date and Time” for more in-
formation.
5) Stop Alarms If option EN50131 is disabled, this area
displays the icon when the visual/audio (sirens) signal-
ling devices are disabled via the Stop Alarms option: see
“Menu (User) > Stop Alarms” for more information.
+The icon is also displayed when option
EN50131 is enabled, if the signalling devices are
disabled by the jumper SERV: ask your installer for
more information.
6) Arm Status This area can show the following icons,
if the EN50131 option is disabled:
Øif all Keypad Partitions are disarmed;
Øif at least one Keypad Partition is armed.
7) Auto-arming If option EN50131 is disabled, this
area displays the icon when the auto-arming is en-
abled: see “System > Auto arming” for more information.
8) Partition Status If option EN50131 is disabled, this
area displays the partitions status of the keypad, when
icon 6 is pressed ( or ):
ØPress or to scroll through the partitions;
ØPress icon 6 ( or ) to hide the partition status.
9) User Logged in LED (green) If on indicates that
the user is logged in to the keypad: read “Entering the
Home Screen” for more information.
10) Armed Partition LED (red) If the EN50131 option
is disabled, comes on when at least one keypad Parti-
tion is armed: read “Arming/Disarming Partitions” for
more information.
ABSOLUTA OPERATIONS FROM TOUCH KEYPAD 7
Figure 1 The M-Touch keypad is on standby (EN50131
disabled).
