Bentel Security FireClass100 Istruzioni per il montaggio

SOFTWARE MANUAL

Use this manual with the following Analogue Fire control panels:

FC200 - 2 Loop Master panel with 4 A Linear power supply

FC200/S - 2 Loop Master panel with 2.5 A Switching power supply

FC200/SL - 2 Loop Slave panel without power unit

FC100 - 1 Loop Control panel with 2.5 A Switching power supply

The name FireClass has been used in this manual to describe features

common to all the above listed panels.

BENTEL SECURITY reserves the right to change the technical features of

these products without prior notice.

Via Gabbiano, 22 - Z.I. S.Scolastica

64013 CORROPOLI (TE) - ITALY

Software Manual: FireClass Analogue Fire Control panel

ISTRUZIONI SOFTWARE INGLESE FC100-200/UK ISTSOFFIREC/UK

TABLE OF CONTENTS

INSTALLATION 5

Introduction . . . . . . . . . . . . . . . . . . . . . . . . 5

Installing the Fire Software suite . . . . . . . . . . . . 5

Select Language . . . . . . . . . . . . . . . . . . . . . . 5

Fire Software 7

Communicating with Fireclass control panels . . . . . 7

Main window . . . . . . . . . . . . . . . . . . . . . . . . 9

File . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Programming . . . . . . . . . . . . . . . . . . . . . . 13

Parameter Settings . . . . . . . . . . . . . . . . . . . 13

Control . . . . . . . . . . . . . . . . . . . . . . . . . 15

Modem . . . . . . . . . . . . . . . . . . . . . . . . . 18

Help . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Programming Peripheral Devices . . . . . . . . . . . 19

Password . . . . . . . . . . . . . . . . . . . . . . . . 20

Telephone . . . . . . . . . . . . . . . . . . . . . . . 20

Options . . . . . . . . . . . . . . . . . . . . . . . . . 22

System . . . . . . . . . . . . . . . . . . . . . . . . . 23

Factory . . . . . . . . . . . . . . . . . . . . . . . . . 24

Log window . . . . . . . . . . . . . . . . . . . . . . . 25

Control panel Log management . . . . . . . . . . . . 26

Customer Account Log . . . . . . . . . . . . . . . . . 26

Print and Close . . . . . . . . . . . . . . . . . . . . . 27

Translat 28

File Menu . . . . . . . . . . . . . . . . . . . . . . . . . 29

Search Menu . . . . . . . . . . . . . . . . . . . . . . . 30

Find Text . . . . . . . . . . . . . . . . . . . . . . . . 30

Create language . . . . . . . . . . . . . . . . . . . . . 31

Copy language . . . . . . . . . . . . . . . . . . . . . . 31

Modify Language . . . . . . . . . . . . . . . . . . . . 32

dbManager 35

File Menu . . . . . . . . . . . . . . . . . . . . . . . . . 35

Export data . . . . . . . . . . . . . . . . . . . . . . . 36

Copying Customer accounts . . . . . . . . . . . . . . 38

GMap 39

Graphic map management window . . . . . . . . . . 41

Management menu . . . . . . . . . . . . . . . . . . . 42

Settings Menu . . . . . . . . . . . . . . . . . . . . . . 42

Map settings . . . . . . . . . . . . . . . . . . . . . . 44

New backgrounds . . . . . . . . . . . . . . . . . . . . 45

New Symbols . . . . . . . . . . . . . . . . . . . . . . 45

Create Map . . . . . . . . . . . . . . . . . . . . . . . . 45

Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

4Analogue Fire Control Panels FireClass

INSTALLATION

Introduction

The Bentel Fire suite contains the Management software applications for

the FC100/200, J400 and J524 control panels and the PCJ400 Interface.

Select FC100/200 control panel, to access the following applications:

Fire Software:Control panel Programming and Management application.

Translat: Language application (customizes system terminology).

DBManager: Data export application.

GMap: Supervisory application (with graphic layouts).

Installing the Fire Software suite

Work carefully through the following steps to install the Bentel Fire Suite

applications.

1. Run the Setup.exe application contained in the CdRom.

2. Select a folder for the Bentel Fire Suite applications.

3. Check the installation settings then click on Next. If changes are neces-

sary - click on Back.

Select Language

You can select the language of the Bentel Fire Suite applications (Fire

Software, GMap and dbManager) from the Languages provided, or use

the Translat application to customize the application terminology.

To Select the application language:

1. Run the Fire Software application.

2. Select Settings from the Main window.

INSTALLATION 5

2. Select System Settings from the drop-down menu to open the Parameter

settings then click-on Miscellaneous.

3. Select a language from the Language list.

4. Click-on OK.

+To initialise the selected language ---- close then re-open the application.

+The source language of the Translat application is English.

Figure 1 Remote link between the Fireclass control panel and PC.1) PC serial port;

2) Telephone network; 3) CVSER/9F9F wires; 4) BMOD or BMOD-RX mo-

dem; 5) Telecom Module FC200/COM; 6) FIRECLASS 200.

6Analogue Fire Control Panels FireClass

Fire Software

The Fire Software application will allow you to program, manage, super-

vise and communicate with FireClass control panels.

Communicating with Fireclass control panels

If you are using the Supervisory, Management, Downloading and Log

Management functions, the control panel must be connected to your PC (in

local/remote communication).

It is not necessary for the control panel to be connected to your PC during

the parameter programming phase.

+If you are using the Fire system supervisory function of the GMap applica-

tion, the control panel must be connected to your PC.

Local/Remote Communications:

1. Using a CVSER/9F9F cable (accessory item) or similar cable (see figure

1a), connect the control panel serial port (refer to "PARTS IDENTIFICA-

TION" in the "INSTALLATION MANUAL") to a serial port on your PC.

2. Select the PC serial port from the Local Communication sheet (Setting

parameters window).

For 25 pin serial ports ---- use an ADSER/9M25F adapter (accessory item)

or make a cable as per figure 2b.

Remote communications with Fireclass control panels require a

BMOD/BMOD-RX modem (see figure 1).

+If the control panel is not connected to your PC when you start the com-

munication, the following warning will be shown.

Fire Software 7

+If the serial port for the local communication is invalid, the following warn-

ing will be shown.

Select OK to continue.

Figure 2 PC to Control panel cable link

8Analogue Fire Control Panels FireClass

Main window

The Fire Software application opens on the Main window (see fig. 3).

The following section describes the File, Programming, Settings, Check,

Modem and Help menus.

File

The File options (New Customer, Save configuration, Print, Exit) will allow

you to manage customer account data. The details and system configura-

tion of each customer account will be saved to the hard disk database.

New Customer This option will allow you to assign and/or reset default parameters.

If, on selecting the New Customer option, the application finds unsaved

parameters, the following message will be shown:

If you click-on Yes, the Customer account window will open (refer to

"Save" section).

If you click-on No, the application will abandon any changes.

Figure 3 Main window

Fire Software 9

To retrieve customer data from the database ---- right-click on the customer

account concerned (Main window Fig.3).

To delete the retrieved customer data from the database click-on Delete,

the application will show the following message:

If you click-on Yes, the respective customer data will be deleted from the

hard disk database.

Save

configuration This option will allow you to save the customer account data to the hard

disk database.

Customers are identified by their Name and Code, therefore:

ØIf you try to save Customer data using a duplicated Name or Code, the ap-

plication will show the following warning:

If you click-on Yes, all new values will overwrite previous settings.

+This application is not case sensitive.

ØIf you try to save customer account data using a duplicated Name and a

new Code, the application will show the following warning:

ØIf you try to save customer account data using a new Name and a dupli-

cated Code, the application will show the following warning:

10 Analogue Fire Control Panels FireClass

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Bentel Security Pannello di controllo

Bentel Security

Bentel Security ABS104 Guida rapida alla configurazione

Bentel Security

Bentel Security KYO 100 Manuale utente

Bentel Security

Bentel Security Absoluta Plus 4.10 Manuale utente

Bentel Security

Bentel Security KYO 320 Manuale utente

Bentel Security

Bentel Security KYO 320 Manuale utente

Bentel Security

Bentel Security FireClass FC500IP Manuale utente

Bentel Security

Bentel Security KYO 4 M Manuale utente

Bentel Security

Bentel Security FireClass 200 Manuale utente

Bentel Security

Bentel Security K-NET Manuale utente

Bentel Security

Bentel Security KYO-Unit Series Manuale utente

Bentel Security

Bentel Security KYO 320 Manuale utente

Bentel Security

Bentel Security Absoluta Manuale di istruzioni

Bentel Security

Bentel Security NormaOtto Series Manuale utente

Bentel Security

Bentel Security OmniaTAST-R Manuale utente

Bentel Security

Bentel Security KYO 320 Manuale utente

Bentel Security

Bentel Security Omnia Manuale utente

Bentel Security

Bentel Security ABSOLUTA ABS16P15 Manuale utente

Bentel Security

Bentel Security FireClass 200 Manuale utente

Bentel Security

Bentel Security KYO 320 Manuale utente

Bentel Security

Bentel Security FireClass 100 Manuale utente

Bentel Security

Bentel Security Academy 4 Istruzioni operative

Bentel Security

Bentel Security KYO 320 Manuale utente

Bentel Security

Bentel Security Omnia 8/L Manuale utente

Bentel Security

Bentel Security ABSOLUTA 16 Guida utente

Manuali Pannello di controllo popolari di altre marche

RDZ

RDZ PC-HRX Manuale utente

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manuale tecnico

Efka

Efka Variocontrol V810 Manuale utente

Cebora

Cebora 208-10 Manuale utente

AMX

AMX AutoPatch CP-15 Manuale utente

Satel

Satel CA-6 KLED-S Manuale utente

Evolution

Evolution IQ plus 800 Manuale utente

Fagor

Fagor 8040 TCO CNC Manuale utente

Trane

Trane ComfortLink II XL950 Control Manuale utente

AKO

AKO PROCool AKO-17635-2 Manuale utente

ABB

ABB 6136/30M-101 Manuale utente

Telikou

Telikou BK-603 Belt Pack Manuale utente

Mapei

Mapei Mapeheat Thermo Touch Manuale utente

Bosch

Bosch D9412GV4 Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manuale utente

Sminn

Sminn BOX L VF1L EI Manuale utente

Balboa

Balboa TP600 Manuale utente

Nice

Nice HSCU1 Specifiche tecniche