Bernina L 890 Manuale utente
Quick reference BERNINA L 890
1
Screen
«Home» Switch between home screen and sewing screen.
2
Quick reference BERNINA L 890 Screen
«Help» By tapping on «?» the help function is activated. A screen
area can be selected and the corresponding help /
explanation appears.
«clr» Reset all settings of the current stitch to the default values.
Manual settings are retained and must be reset manually.
1
2
Quick reference BERNINA L 890
3
Home screen
«Guided
mode» The guided mode is preset by default supporting the user to
get to know the operation of the machine. No prior
knowledge is required. This mode guides you step by step
through the necessary settings and leads to sewing start.
Animations are offered as help to perfom the correct
operation. By default, this mode is represented by a blue
background of the screen.
«Expert
mode» The expert mode is a creative and fast mode, which allows
shortened operation and only the most important
instructions are indicated. The expert mode requires good
knowledge of overlocking. After selecting the stitch this
mode shows an overview of the mechanical settings, which
are to be individually checked or executed. By default, this
mode is represented by a purple background of the screen.
User mode
4
Quick reference BERNINA L 890 Home screen
«Setup
program» Make personal settings to the machine which are retained
when the machine is restarted.
«Tutorial» Show more information about operating the machine.
«Creative
consultant»
Select stitch with the help of the creative consultant.
The creative consultant recommends the optimal stitch in
combination with needle, thread and presser foot based on
an individual project.
«eco» Activate eco mode and lock the screen.
Quick reference BERNINA L 890
5
Sewing screen
«Stitch
selection» Select stitch directly.
The last stitch settings are lost unless they have been saved.
«Personal
memory» Select personal stitches.
Saving, overwriting or deleting stitch settings.
Automatic settings will be saved. Manual settings can be
recorded as a stitch note and also saved.
«Manual
settings» Show the manual settings to be executed on the machine for
the selected stitch.
The wizard may be selected from this screen for step by step
instructions.
«Stitch view» The stitch view is a general overview of the selected stitch
along with its automatic settings (stitch length, differential
feed and thread tensions).
6
Quick reference BERNINA L 890 Stitch
with direct influence on the stitch
Thread tension adjustment
Stitch length «SL»
Differential feed «DF»
Stitch optimizer
The stitch view is the most important view on
the sewing screen.
The selected stitch is shown in the stitch
view. This provides access to various views
and automatic settings.
The setting of a stitch is done via two screen
views:
1 Manual settings
2 Automatic settings
Automatic settings
Stitch view
with direct influence on the machine,
regardless of the stitch selection
Needle stop up/down
Maximum sewing speed
Quick reference BERNINA L 890
7
Stitch
Presser foot
recommendation
Setting presser foot
pressure
Setting cutting width
«CW»
Setting «mtc» micro
thread control
Setting roll hem
selector lever «O/R»
Setting upper looper
converter «hooked in/
hooked out»
Setting upper looper
«on/off»
Setting knife «on/of»
Insert «Knife cover
insert/cover stitch
insert»
Insert needles
Cancel
Confirm
Wizard
The overview of the manual settings can be
selected from the «stitch view». All
information are shown as notes and must
always be executed or checked by the user
on the machine.
Manual settings
8
Quick reference BERNINA L 890 Stitch selection
Direct stitch selection By creative consultant From personal memory
2
3
2
3
4
2
1
1
1
Quick reference BERNINA L 890
9
Personal memory
Delete stitchRename stitchSave stitch
111
2
2
2
3
33
3
4
10
Quick reference BERNINA L 890 Sewing start
Selecting a stitch Threading the machine
Threading the needle Threading the looper
LC CC RC
LN RN
OVERLOCK
LN RN
COVER
LC CC RC
COMBO
RC LN RN
LC CC RC
LN RN
OVERLOCK
LN RN
COVER
LC CC RC
COMBO
RC LN RN
LC CC RC
LN RN
OVERLOCK
LN RN
COVER
LC CC RC
COMBO
RC LN RN
1 1 2 3
45
2
3
Altri manuali per L 890
3
Indice
Altri manuali Bernina Macchina da cucire
Bernina
Bernina Record 930 Electronic Manuale utente
Bernina
Bernina 900 Manuale utente
Bernina
Bernina BERNETTE 50 Manuale utente
Bernina
Bernina virtuosa 153 QE Manuale utente
Bernina
Bernina 540 Manuale utente
Bernina
Bernina BERNINA 1001 Manuale utente
Bernina
Bernina 950 Industrial Manuale utente
Bernina
Bernina 735 Manuale utente
Bernina
Bernina 555 QE Manuale utente
Bernina
Bernina Bernette Funlock b44 Manuale utente
Bernina
Bernina B 350 Manuale utente
Bernina
Bernina aurora Embroidery Machine Manuale utente
Bernina
Bernina Record 930 Electronic Manuale utente
Bernina
Bernina 215 Manuale utente
Bernina
Bernina Artista 165 Manuale utente
Bernina
Bernina deco 330 Manuale utente
Bernina
Bernina Serger 700D Manuale utente
Bernina
Bernina Serger 700D Manuale utente
Bernina
Bernina Artista 165 Manuale utente
Bernina
Bernina Artista 180 Manuale utente
