BFT Clonix 2E Manuale del proprietario
Programming Manual
http://www.remotecontrol-express.com - TEL : +44 (0) 207 399 7782 - FAX : +44 (0) 207 927 3151
BFT Clonix 2E
Assembly of your receiver:
1. Unplug your motor. Verify that you have a 12V or 24V feed with an alternating or direct
current. Connect the feed between the “–” and “+” terminals (you don’t have to respect any
direction if the feed is alternating). If the feed is stronger, you will have to install an adapter.
2. Connect the first channel between the CH1 terminals.
3. Connect the second channel between the CH2 terminals.
Please note: there are several ways to connect your receiver, either as a replacement for an old
receiver (check the compatibility of your remote controls with your new receiver), or in parallel with
the current receiver (example):
4. Your new receiver is programmed.
Programming Manual
http://www.remotecontrol-express.com - TEL : +44 (0) 207 399 7782 - FAX : +44 (0) 207 927 3151
Programming of your new remote control:
1. Open the casing of your receiver.
2. On the receiver circuit board, press the SW1 button. Let it go. The Led light of the receiver
blinks.
3. Press both buttons on your new remote control (both superior buttons if your remote
control has 4 buttons) until the LED light of the receiver illuminates fixedly.
4. Press the first button on your new remote control until the LED light of the receiver blinks
again.
5. The Led light of the receiver turns off.
6. The first button of your new remote control is programmed.
7. Repeat this procedure to program the second button of your new remote control. Use this
time the SW2 button on the circuit board of the receiver.
Indice
Altri manuali BFT Ricevitore
BFT
BFT MIME AC Manuale utente
BFT
BFT gsm rec 24v Manuale utente
BFT
BFT CLONIX E Manuale utente
BFT
BFT CLONIX 1 Manuale utente
BFT
BFT CLONIX E Series Manuale utente
BFT
BFT REO1 E Manuale utente
BFT
BFT INTRIC E Series Manuale utente
BFT
BFT CLONIX2 Manuale utente
BFT
BFT CLONIX 4 RTE Manuale utente
BFT
BFT CLONIX 2E AC U-LINK 230 Manuale utente
