Big Button BB40 Manuale utente

BB40

Owner’s Manual

Introduction Table of Contents

Congratulations on your purchase of this

Universal Remote Control. Universal Remotes

let you replace a broken or lost remote or

combine more than one remote into one.

In addition, this remote is equipped with a

command learning feature which lets the

remote learn commands from your original

equipment remote control!

We’ve even take this a step further and added

a handy optional Find feature. By purchasing

additional accessories you can easily locate a

lost or misplaced remote, see page 18 for more

details.

We’ve also added Braille to the most

frequently used buttons to make them easier to

ﬁnd for the sight-impaired.

This remote control operates the common

features of most models and brands of

IR Infrared Controlled Video Equipment.

This remote may provide functions that

are not available on your equipment. Some

functions of your particular equipment (e.g.

menu functions) may not be controlled by

this remote. In such cases, use the original

remote control for your equipment. Please

use this manual to become familiar with your

Universal Remote. After you are familiar with

your remote the ﬁrst thing you need to do is to

install batteries and setup your remote for your

particular product and brand.

Thank you for buying this Universal Remote

and we hope it will give you many years of

service.

Introduction............................................................2

Button Functions.................................................... 4

Setup ......................................................................6

Battery Installation............................................ 6

Battery Saver.....................................................6

Code Saver........................................................ 6

Power-On default.............................................. 6

Code Entry .............................................................7

Direct Code Entry ............................................. 7

Code Search .................................................... 10

Code Identiﬁcation Feature.................................. 11

Programming Combo Device Codes ................... 12

Volume/Mute Control Feature .............................12

Setting Volume/Mute Control, Punch-Through ... 12

Setting any Mode to use its own Volume/Mute ...13

Code Learning......................................................14

Tips on Learning.............................................14

Learning Commands....................................... 16

Clearing Commands............................................. 17

Clearing Learned commands for a mode........17

Master Clear.................................................... 17

Optional Accessories............................................18

Troubleshooting ................................................... 19

Note: The REC button must be pressed TWICE to

record. For some brands of VCRs, you might need

to press the REC button once, then press it again

for three seconds.

Some buttons on the remote might have functions

that are referred to by different names on the

device you are controlling. E.G., PREV may

be called RECALL, or ENTER may be called

DISPLAY. These differences depend on the brand

and model of your product. Also, this remote can

only operate features that exist on your product.

E.G., your product must have PREV ability for the

PREV button to operate this feature.

Button Functions

10.

11.

12.

23.

22.

21.

20.

19.

18.

17.

16.

15.

14.

13.

1. TV, SAT/CBL ,DVD/VCR, DVR Selects

product to be operated.

2. Backlighting Turns backlighting on and off.

3. MUTE Turns off the TV sound while the

picture remains.

4. CC (SUBTITLE) TV Closed Caption (if your

TV has this feature) or DVD Subtitle toggle.

5. GUIDE Displays on-screen program guide.

6. VOLUME UP/DOWN Changes the volume

level of the product, normally the TV.

7. UP, DOWN, LEFT & RIGHT navigation

buttons.

8. MENU Brings up the DVD disc Menu screen

- use with the UP, DOWN, LEFT & RIGHT

navigation buttons.

9. PAGE - Moves one screen down at a time in

guides and menus.

10. NUMBERS Enter numbers for direct channel

selection. Some products require Enter to be

pressed after channel selection.

11. ENTER Used after direct channel number

entry to immediately change to the selected

channel.

12. RECORD, PLAY, STOP, REW, FF, PAUSE

VCR control buttons operate your VCR even

when the remote is set to operate the TV. Also

operates DVD Scan -/+.

13. DOT Used for digital channels, e.g. 2.3.

14. INFO Displays/selects on-screen channel

information, etc.

15. PAGE + Moves one screen up at a time in

guides and menus.

16. EXIT Used to exit menu functions.

17. OK Selects menu items for the device you are

controlling.

18. CHANNEL UP/DOWN Changes channels.

19. INPUT Brings up the DVD Player’s Setup

Menu.

20. PREV Returns to the previously selected

channel, or DVD repeat toggle.

21. SETUP Used for setup.

22. POWER Turns product On or Off.

23. LEARN Used for learning additional

commands.

Button Functions, cont.

Direct Code Entry

To set up your remote to control your TV

1. Press and hold the SETUP button until the

green indicator under a mode button stays

on, then release the SETUP button.

2. Press and release the TV mode button. The

green indicator for TV mode blinks, then

stays lit.

3. Enter the 4 digit TV code from the code

tables (on separate sheet). Note: after a

valid code entry, the green indicator turns

off. For an invalid code, the green indicator

ﬂashes.

4. With your device on, press POWER. If the

device turns off, no further programming

is required. Note: If some buttons do not

operate your equipment, try one of the other

codes for your brand.

Note: Most users will ﬁrst set up the remote

to control their TV. But you also need to set

up the remote to control other devices you

want to control:

To set up your remote to control a Cable

Box

1. Press and hold the SETUP button until the

green indicator under a mode button stays

on, then release the SETUP button.

2. Press and release the SAT/CBL mode

button. The green indicator for SAT/CBL

mode blinks, then stays lit.

3. Enter the 4 digit Cable code from the code

tables (on separate sheet). Note: after a

valid code entry, the green indicator turns

off. For an invalid code, the green indicator

ﬂashes.

4. With your device on, press POWER. If the

device turns off, no further programming

is required. Note: If some buttons do not

operate your equipment, try one of the other

codes for your brand.

Setup

Battery Installation

1. On the back of the remote, push down on

the tab and lift the cover off.

2. Match the batteries to the + and - marks

inside the battery case, then insert 2 AA

Alkaline batteries.

3. Press the battery cover back into place.

Battery Saver

Your remote automatically turns off if the

buttons are depressed more than 30 seconds.

This will save your batteries should your

remote get stuck in a place where the buttons

remain depressed (e.g., between the sofa

cushions).

Code Saver

Codes are stored in permanent memory while

you are changing batteries so you will not lose

any codes stored in the remote while you are

changing batteries.

Power-On Default

The remote powers on in TV mode.

Note when using your remote that you don’t

need to point it directly at the device you want

to control. We’ve included transmit LEDs on

the back of the remote so it works even if you

point it upwards.

To set up your remote to control a Satellite

Receiver

1. Press and hold the SETUP button until the

green indicator under a mode button stays

on, then release the SETUP button.

2. Press and release the SAT/CBL mode

button. The green indicator for SAT/CBL

mode blinks, then stays lit.

3. Enter the 4 digit Satellite code from the

code tables (on separate sheet). Note: after

a valid code entry, the green indicator turns

off. For an invalid code, the green indicator

ﬂashes.

4. With your device on, press POWER. If the

device turns off, no further programming

is required. Note: If some buttons do not

operate your equipment, try one of the other

codes for your brand.

To set up your remote to control a DVD

Player

1. Press and hold the SETUP button until the

green indicator under a mode button stays

on, then release the SETUP button.

2. Press and release the DVD/VCR mode

button. The green indicator for DVD/VCR

mode blinks, then stays lit.

3. Enter the 4 digit DVD code from the code

tables (on separate sheet). Note: after a

valid code entry, the green indicator turns

off. For an invalid code, the green indicator

ﬂashes.

4. With your device on, press POWER. If the

device turns off, no further programming

is required. Note: If some buttons do not

operate your equipment, try one of the other

codes for your brand.

To set up your remote to control a VCR

1. Press and hold the SETUP button until the

green indicator under a mode button stays

on, then release the SETUP button.

2. Press and release the DVD/VCR mode

button. The green indicator for DVD/VCR

mode blinks, then stays lit.

3. Enter the 4 digit VCR code from the code

tables (on separate sheet). Note: after a

valid code entry, the green indicator turns

off. For an invalid code, the green indicator

ﬂashes.

4. With your device on, press POWER. If the

device turns off, no further programming

is required. Note: If some buttons do not

operate your equipment, try one of the other

codes for your brand.

To set up your remote to control a Digital

Video Recorder (DVR)

1. Press and hold the SETUP button until the

green indicator under a mode button stays

on, then release the SETUP button.

2. Press and release the DVR mode button.

The green indicator for DVR mode blinks,

then stays lit.

3. Enter the 4 digit DVR code from the code

tables (on separate sheet). Note: after a

valid code entry, the green indicator turns

off. For an invalid code, the green indicator

ﬂashes.

4. With your device on, press POWER. If the

device turns off, no further programming

is required. Note: If some buttons do not

operate your equipment, try one of the other

codes for your brand.

Direct Code Entry, cont. Direct Code Entry, cont.

10 11

If your product does not respond after you

have tried all the codes for your brand, or if

your brand is not listed, try searching for your

code by following these steps.

1. Manually turn on the device (TV, Cable

Box, etc.) to be controlled.

2. Press and hold the SETUP button until a

green indicator stays on, then release the

SETUP button.

3. Press and quickly release the desired mode

button (TV, SAT/CBL, etc.). The green

indicator for that mode blinks off once.

4. Press the CHANNEL UP button repeatedly

(up to 300 times) until the device to be

controlled changes channel. The green

indicator blinks off with each button press.

If you accidentally overshoot the code

required, press the CHANNEL DOWN

button to backtrack through the library

until the device changes channel. Pressing

CHANNEL UP changes direction to

forward again.

5. Press and release MUTE to install the code.

Code Search

Code Identi cation Feature

The Code Identiﬁcation Feature allows you to

identify the 4 digit library code stored under

your device key. For example, if you want to

ﬁnd out what 4 digit code is stored under your

TV device key, follow the six steps below:

1. Press and hold the SETUP button until the

green indicator under a mode button stays

on, then release the SETUP button.

2. Press and release the desired mode button

(TV, SAT/CBL, etc.). The green indicator

for that mode blinks, then stays lit.

3. Press and release the SETUP button. The

green indicator blinks off.

4. To ﬁnd the ﬁrst digit for the code stored

under the mode key pressed in step 2, press

each numeric key from 0-9 in turn. When

the green indicator blinks off the number

you pressed is the ﬁrst digit for the code

you are searching for.

5. To ﬁnd the second digit, repeat step 4, this

time when the green indicator blinks off this

is the second digit.

6. Repeat step 4 to ﬁnd the third and fourth

digits.

Write your codes down here for easy reference later.

Type Type stored Code

TV TV

SAT/CBL

DVD/VCR

DVR

Direct Code Entry, cont.

Most users will store DVD codes under the

DVD/VCR button, Cable or Satellite codes

under SAT/CBL, etc. If (for example) you

want to store a CD code under DVD/VCR,

ﬁrst follow the procedure for Direct Code

Entry (previous page) and press DVD/VCR in

step 2 of Direct Code Entry, then enter ANY

CD code in step 3 of Direct Code Entry. Then

follow the steps above for Code Search. Note:

If the device does not have a CHANNEL UP

button, use PLAY (VCR only) or POWER

instead. Code Search starts from the currently

stored 4 digit number under that mode.

Direct Code Entry, cont.

12 13

Programming Combo Device Codes

Some Combo devices (e.g. TV/VCR, TV/DVD,

DVD/VCR, etc.) will require you to set up two

different Mode buttons to control both parts of the

Combo device. For example, if you have a TV/

DVD Combo, you might need to set up one code

under the TV button to control the TV part AND

a separate code (under any other Mode button) to

control the DVD part.

Volume/Mute Control and Punch-Through

Feature

This remote lets you select which device Mode

controls your Volume/Mute buttons. The remote is

initially set (factory default) for all device Modes

programmed with “Visual” codes (e.g. TV, VCR,

DVD, DVR, SAT & CABLE) and “Audio” codes

(e.g. CD & AUDIO) to use their own Volume/Mute

control if present. If the programmed “Visual”

code has no Volume/Mute operation of its own

then those buttons will punch-through control to

the TV Mode device without needing to change to

TV Mode. Please refer to the next page for more

information.

Any Mode chosen for Volume/Mute control

MUST have its own Volume/Mute function or

the Volume/Mute buttons will do nothing.

Setting ALL Volume/Mute Control to any one

Mode

This routine can set all Modes to “punch-through”

to any one chosen Mode for Volume/Mute button

control without the needing to change to that

Mode.

1. Press and hold the SETUP button until the

green indicator under a mode button stays on,

then release the SETUP button.

Setup, cont.

2. Press and hold the MUTE button until the

green indicator blinks off, then release the

button.

3. Press and release the desired Mode button (TV,

SAT/CBL, etc.) for Volume/Mute control, the

green indicator for that mode blinks then stays

on.

4. Press and release the MUTE button and the

green indicator turns off. The green indicator

will blink rapidly for three seconds if the Mode

you have selected has no Volume/Mute control.

5. All other Modes will now punch-through to

your chosen Mode for Volume/Mute control.

6. All “Visual” and “Audio” programmed Modes

will now punch-through to the respective

Modes you have chosen for Volume/Mute

control.

Setting any Mode to use its own Volume/Mute

Control

This routine can set any Mode to use only its own

Volume/Mute control. Note - If your chosen Mode

has no Volume/Mute functions of its own then the

Volume/Mute buttons will do nothing.

1. Press and hold the SETUP button until the

green indicator under a mode button stays on,

then release the SETUP button.

2. Press and hold the MUTE button until the

green indicator blinks off, then release the

button.

3. Press and release the desired Mode button (TV,

SAT/CBL, etc.), the green indicator for that

mode blinks then stays on.

4. Press and release the VOLUME- (Down)

button, the green indicator blinks then stays on.

5. Press and release the MUTE button and the

green indicator turns off.

6. All “Visual” and “Audio” programmed Modes

will now punch-through to the respective

Modes you have chosen for Volume/Mute

control.

Setup, cont.

14 15

The learning feature lets you “learn” functions

from your original remote control. For example

- you may want to use your remote to operate

the RANDOM PLAY feature from your original

CD remote control. This remote is equipped with

an “easy learning” feature that lets you “learn”

features (such as RANDOM PLAY from your

original CD remote).

Tips on Learning

You can only learn one device type under any one

Mode button e.g. only learn TV codes under the

TV Mode, DVD codes under the DVD Mode,

etc. If you are trying to learn from a “Universal”

remote, it might have more than one code type

stored under a Mode. Try learning from another

remote to see if there’s a problem with the type or

brand of remote you are trying to learn from.

a. Some functions from some types of remotes

might not be able to be learned.

b. No functions may be stored under LEARN,

BACKLIGHT, or SETUP buttons.

c. Only one original device type can be learned

per individual Mode.

d. Use fresh batteries for both the Learning

Remote and the Original Remote.

e. Keep at least three feet away from incandescent

or low-energy lights when learning.

f. Perform a Master Clear (see page 17) before

learning and try learning 2 or 3 commands

initially. Then carry out a Master Clear before

completely learning your original remote’s

commands.

g. Place the original remote end-to-end with the

Learning Remote so the IR transmitters on both

remotes are directly in line with each other.

You may need to adjust the height of either

remote to achieve this. Use the IR Transmitter

Finder feature to assist you.

Code learning

h. Keep the distance between the two remotes

to approximately 1 inch and do not move or

change the distance between the two remotes

until you have learned all the required buttons

for that Mode.

i. When Learning, do not release the button being

Learned until the green indicator has blinked off

for half a second.

j. Avoid learning your original remote Volume/

Mute buttons unless you are sure these operate

the same device e.g. some original DVD

remotes include TV Volume/Mute button

control and can be two different types of code.

k. Avoid learning your original remote VCR

transport buttons unless you are sure these

operate the same device e.g. some original TV

remotes include VCR button control and can be

two different types of code.

l. If learning the ﬁrst or second buttons for a

Mode results in continuous errors then try the

following:

i. End the Learn session by pressing the

SETUP button.

ii. Clear out the learned commands for that

Mode.

iii. Check the IR transmitters are correctly

aligned between the two remotes.

iv. Adjust the distance between the two remotes

to be closer (e.g. half an inch) or a further

away (e.g. 2 inches) from each other.

v. Try learning the original remote for that

Mode again.

If problems reoccur with the same button check

the original remote button being learned – does it

transmit? Does it operate the target device? Try

learning that button under a different clear Mode.

If it learns okay then it is likely to be a different

code type from the others and cannot be learned

under the same Mode.

Tips on Learning cont.

16 17

1. Press and hold the SETUP button until a green

indicator turns on, then release the button.

2. Press and release the desired mode button (TV,

SAT/CBL, etc.), the green indicator blinks then

stays on.

3. Press and release the LEARN button, the green

indicator blinks then stays on.

4. Press and release the Learning Remote button

that you want to teach (e.g. POWER).

5. Point both remotes facing each other by

approximately 1 inch apart (see tips on pages 14

and 13).

6. Press and hold the Original Remote button

(e.g. Power) until the green indicator blinks

once and stays on. If there is a learning

problem, the indicator blinks for three seconds

and stays on. If this happens, repeat Steps 4 to

7. Repeat Steps 4-6 for other buttons you want to

learn.

8. Press and release the SETUP button when all

desired remote commands are learned. Code

Learning is now complete.

Line up your remotes (that you’re learning from) in front of the

Learning remote, on a hard surface approx. 1 inch apart.

2. 3.

Learning Commands

To Clear all Learned Commands under a mode

1. Press and hold the SETUP button until a green

indicator turns on. Release the SETUP button.

2. Press and release the button for the mode you

want to clear (TV, SAT/CBL, etc.). The green

indicator blinks off.

3. Press and release the LEARN button TWICE.

The green indicator blinks off.

4. Press and release the SETUP button. The green

indicator turns off. All learned Commands

under that mode are now cleared.

Master Clear - To Clear all Learned Commands

under all modes

1. Press and hold the SETUP button until the

green indicator turns on. Release the SETUP

button.

2. Press and release the LEARN button TWICE.

The green indicator blinks off.

3. Press and release the SETUP button. The green

indicator turns off. All Learned commands in

the remote are now cleared.

Clearing Commands

18 19

Optional Accessories

Your new remote has a “Find Feature” build

in. If you purchase either of the accessories

below you can press a button to locate your

remote if you misplace it. When your press the

button the remote emits a loud tone to let you

know where it is.

The optional keyfob can be kept

on your key chain with your keys

and lets you easily locate your

lost remote with the push of a

button. Two coin cell batteries are

included. To replace them, pry

the Keyfob open and replace with

two CR2016 Lithium coin cells.

The optional stand is a handy place to store

your remote, and if you misplace the remote

the button on the stand lets you easily locate it.

The stand requires two AAA batteries, not

included.

Troubleshooting

Remote does not operate your product.

• Press the mode button of the product you want

to control.

• Program the remote with a new code.

• Install new batteries. (You might have to

reprogram your remote after installing new

batteries.)

• Remote may not be compatible with your

product.

Remote does not operate some features of your

product.

• Program remote with a new code.

• Remote may not be able to operate all features

of your product or button names might be

different than your product.

Green Indicator blinks after you program a

product code.

• Remote did not accept the code.

• Try to program the code again or try a different

code.

For help with setup, please call: 201-661-9944.

The manufacturer warrants that this product shall

be free from defects in material, workmanship

and assembly, under normal use, in accordance

with the speciﬁcations and warnings, for 120 days

from the date of purchase. This warranty extends

only to the original purchaser of the product,

and is nontransferable. Defective products,

together with the dated proof of purchase, must

be returned to the place of purchase for repair or

replacement. THERE ARE NO OTHER EXPRESS

WARRANTIES. Incidental and consequential

damages are disclaimed where permitted by law.

This warranty gives you speciﬁc legal rights, and

you may also have other rights which vary from

state to state.

Limited Warranty

Indice

Altri manuali Big Button Telecomando

Big Button

Big Button BW-1220-US Manuale utente

Manuali Telecomando popolari di altre marche

Panasonic

Panasonic EUR7622KB0 Manuale utente

Bang & Olufsen

Bang & Olufsen Beo4 Manuale utente

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuale utente

Multiplex

Multiplex PROFI TX 9 Manuale utente

One Remote

One Remote RMB4 Manuale utente

FUTABA

FUTABA 9ZAP - PART2 Manuale utente

HR Matic

HR Matic HR MULTI 3 Manuale utente

Yamaha

Yamaha ACC-GNRST-30-20 Manuale utente

EisSound

EisSound KBSOUND Manuale utente

Marantz

Marantz RC101 Manuale utente

Conrad

Conrad FS20 TC6 Manuale utente

Anritsu

Anritsu MP1777A Manuale utente

Niles

Niles WVC100 Guida alla risoluzione dei problemi

RCA

RCA RCU1300 Manuale utente

Bang & Olufsen

Bang & Olufsen BEO6 Manuale utente

GE 94901 Manuale utente

Onbon

Onbon YQ1-75 Manuale utente

FUTABA

FUTABA R7108SB Istruzioni per l'installazione