5
STEP 4
1) Load the EZ-RAX with the load capacity parts from page 2. Place casters (with snap pins removed)
on the rack, and secure in place with the snap pins. See Fig. 4 and 5 side views for reference.
STEP 5
1) Use 12’ strap - aach to
ring A and wrap around
the frames and end guard
panels, and aach to ring B.
Tighten strap. See Fig. 6.
2) Use 8’ strap - aach to ring C
and wrap around walkboards,
cross braces, side guard rails,
and toeboards and aach to
ring D. Tighten strap. See Fig. 6.
3) Use 6’ strap - aach to
ring D and wrap around
the outriggers, and aach
back to ring D. Tighten strap.
See Fig. 6.
4) Check to make sure everything
is secure.
Side View #1
(Fig. 4)
Side View #2
(Fig. 5)
A
C
B
D
Accessory Rack Side
(Fig. 6)
To prevent damage to building overhangs
or canopies, always be aware of the overall
clearance height of the EZ-RAX once it is
loaded on the transport vehicle.
WARNING
