Billion BIPAC- 8500 Manuale utente
BIPAC- 8500 / 8520
SHDSL VPN Firewall Bridge / Router
Quick Start Guide
Billion BIPAC-8500 / 8520 - SHDSL VPN Firewall Bridge / Router
1
Package Contents
BIPAC-8500 / 8520 SHDSL Bridge / Router
CD-ROM containing the online manual
RJ-11 SHDSL / telephone Cable
Ethernet (CAT-5 LAN) Cable
Console (PS2-RS232) Cable
AC-DC power adapter (12VDC, 1A)
This Quick Start Guide
Do not use the BIPAC-8500 / 8520 in high humidity or high
temperatures.
Do not use the same power source for the BIPAC-8500 / 8520 as
other equipment.
Do not open or repair the case yourself. If the BIPAC-8500 /
8520 is too hot, turn off the power immediately and have it
repaired at a qualified service center.
Warning
Place the BIPAC-8500 / 8520 on a stable surface.
Only use the power adapter that comes with the package. Using
a different voltage rating power adaptor may damage the router.
A
ttention
For more detailed instructions on configuring and using
the SHDSL Firewall Bridge / Router, please refer to the
on-line manual.
Quick Start Guide
2
The Front LEDs
LED Meaning
1
2
LINE 1 & 2
Lit when successfully connected to SHDSL line and it is
synchronized.
3 LAN Port
1X — 4X
(RJ-45 connector)
Lit when connected to an Ethernet device.
Green for 100Mbps; Orange for 10Mbps.
Blinking when data is Transmitted / Received.
4 SYS Lit when the system is ready.
5 PWR Lit when power is ON.
3
4
5
2
1
Billion BIPAC-8500 / 8520 - SHDSL VPN Firewall Bridge / Router
3
The Rear Ports
Port Meaning
1 Power Switch Power ON/OFF switch
2 PWR Connect the supplied power adapter to this jack.
3 RESET
After the device is powered on, press it to reset the device or
restore to factory default settings.
0-3 seconds: reset the device
6 seconds above: restore to factory default settings (this is used
when you can not login to the router, e.g. forgot the password)
4 LAN
1X — 4X
(RJ-45 connector)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
four LAN ports when connecting to a PC or an office/home
network of 10Mbps or 100Mbps.
5 CONSOLE Connect a PS2/RS-232 cable to this port when connecting to a
PC’s RS-232 port (9-pin serial port).
6 LINE
1X — 2X
(RJ-11 connector
Connect the supplied RJ-11 (“telephone”) cable to this port when
connecting to the A SHDSL line.
1
23
4
5
*6
＊Only the BIPAC-8520 has two Line jack ports. BIPAC-8500 has one.
Quick Start Guide
4
Connecting Your SHDSL Bridge / Router
1. Connect the Router to a LAN (Local Area Network) and the SHDSL LINE.
2. Power on the device.
3. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN and LINE
LED are lit.
Billion BIPAC-8500 / 8520 - SHDSL VPN Firewall Bridge / Router
5
Configuring PC in Windows XP
1. Go to Start / Control Panel (in Classic
View). In the Control Panel, double-click on
Network Connections
2. Double-click Local Area Connection.
3. In the Local Area Connection Status
window, click Properties.
4. Select Internet Protocol (TCP/IP) and click
Properties.
5. Select the Obtain an IP address
automatically and the Obtain DNS server
address automatically radio buttons.
6. Click OK to finish the configuration.
Quick Start Guide
6
Configuring PC in Windows 2000
1. Go to Start / Settings / Control Panel. In the
Control Panel, double-click on Network and
Dial-up Connections.
2. Double-click Local Area Connection.
3. In the Local Area Connection Status
window click Properties.
4. Select Internet Protocol (TCP/IP) and click
Properties.
5. Select the Obtain an IP address
automatically and the Obtain DNS server
address automatically radio buttons.
6. Click OK to finish the configuration.
Billion BIPAC-8500 / 8520 - SHDSL VPN Firewall Bridge / Router
7
Configuring PC in Windows 98/Me
1. Go to Start / Settings / Control Panel. In
the Control Panel, double-click on Network
and choose the Configuration tab.
2. Select TCP/IP ->
NE2000 Compatible, or the name of your
Network Interface Card (NIC) in your PC.
3. Select the Obtain an IP address
automatically radio button.
4. Then select the DNS Configuration tab.
5. Select the Disable DNS radio button and
click OK to finish the configuration.
Quick Start Guide
8
Configuring PC in Windows NT4.0
1. Go to Start / Settings / Control Panel. In the
Control Panel, double-click on Network and
choose the Protocols tab.
2. Select TCP/IP Protocol and click
Properties.
3. Select the Obtain an IP address from a
DHCP server radio button and click OK.
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Billion Router di rete
Billion
Billion BiPAC 7402 Manuale utente
Billion
Billion BiPAC 5200N Manuale utente
Billion
Billion BiPAC 7402G Manuale utente
Billion
Billion BiPAC 7404VGOX Manuale utente
Billion
Billion BiPAC 5200S Series Manuale utente
Billion
Billion BiPAC 7300M Manuale utente
Billion
Billion BiPAC 7401VGP Manuale utente
Billion
Billion BiPAC 4500NZ(L) Manuale utente
Billion
Billion BiPAC 5200W RC Manuale utente
Billion
Billion BiPAC 7300NX Manuale utente
Billion
Billion BiPAC 7402GL R4 Manuale utente
Billion
Billion BiPAC 7402G Manuale utente
Billion
Billion BiPAC 7300M Manuale utente
Billion
Billion MWEB W40 Manuale utente
Billion
Billion BiPAC 7402VGO Manuale utente
Billion
Billion BiPAC 7402R2 Manuale utente
Billion
Billion BiPAC 7404V(G)OX/V(G)PX Manuale utente
Billion
Billion BiPAC 5400SW Manuale di installazione e funzionamento
Billion
Billion BiPAC 7402G Manuale utente
Billion
Billion BiPAC 7300VGP Manuale utente
