Billion BiPAC 8500 Manuale utente
BiPAC 8500/8520/8501
2.3Mb/4.6Mb SHDSL and 5.7Mb SHDSL.bis
Bridge/Router
VPN Firewall
4-Port Switching Hub
Quick Install Guide
LThis guide covers only the initial
Internet set-up and is based on
the 8500 model. Please refer to
the full User Manual on the CD-
ROM for more advanced
settings. Screen shots may vary
from the actual router.
www.billion.uk.com
2
This symbol on the product or in the instructions means that your electrical and electronic
equipment should be disposed at the end of its life separately from your household waste.
There are separate collection systems for recycling in the EU.
For more information, please contact the local authority or your retailer where you purchased
the product.
3
QUICK INSTALL GUIDE
Billion 8500/8520/8501 VPN Firewall Bridge/Router Installation
1.1 Starting out:
Before you can establish an Internet connection through your Billion 8500 VPN
Firewall Bridge/Router make sure you have the following:
1. A Computer or Notebook with an installed Network Adaptor (sometimes called
an Ethernet Adaptor, Network Card or NIC)
2. An SHDSL (sometimes called SDSL) service account and configuration
information provided by your Internet Service Provider (ISP). You should need
only a User Name and Password, but you can check with your ISP to see if you
require any of the other following configuration parameters to connect your
Billion 8500 VPN Firewall Bridge/Router to the Internet :
a. ISP User Name and Password
b. VPI/VCI parameters
c. Multiplexing Method
d. Host and Domain Names
e. ISP Domain Name Server ( DNS ) Address
f. Fixed or Static IPAddress.
1.2 Steps for Connection:
The following are the steps to properly connect your Billion 8500 VPN Firewall
Bridge/Router:
1. Turn off your computer.
2. Connect the supplied ADSL RJ-11 cable from your master SDSL socket or SDSL
enabled telephone socket to the LINE Port of your Billion 8500 VPN Firewall
Bridge/Router.
3. Connect the Ethernet cable (RJ-45) from one of the Ethernet ports of your Billion
8500 VPN Firewall Bridge/Router to the Network Adaptor in your computer.
4. Connect the Power adaptor to the Billion 8500 VPN Firewall Bridge/Router and
plug the other end into a Power outlet. Power up the unit.
5. Turn on your computer. Please allow up to 45 seconds for your Network Adaptor
to locate the Router.
6. Now you are ready to configure the Billion 8500 VPN Firewall Bridge/Router.
7. Please note that your router should be pre-configured for the UK*. All you need to
do is to follow the instructions that follow and enter your user name and password
4
as supplied by your Service Provider. No other changes should be necessary.
*Standard UK settings are VPI 0, VCI 38, Encapsulation PPPoA, and Annex B for
SHDSL. If the modem is not pre-configured for the UK, you will have to make
changes to the VPI and VCI settings and check the Encapsulation. This can be done at
Step 4 on the next page, and under Configuration. Please contact your Service
Provider to confirm their configuration parameters.
Screen shots in this QIG may vary slightly from the actual Router.
2.1 Configuration:
1. Open Internet Explorer or your default web browser and type
http://192.168.1.254 on the address bar (where you would normally enter the
web site address) as per the illustration below.
2. You will be presented with a user name and password prompt. Simply enter
user name as admin, password as admin and click OK. This will take you to
the modem’s Status Page.*
•If the user name and password prompt box does not appear make sure that any
firewall or anti-virus such as Zone Alarm or Norton is disabled. Also ensure that
your Internet settings are correct. (In Internet Explorer go to Tools/Internet
Options/Connections and make sure “Never dial a Connection” is checked. Then
Click on the LAN settings and ensure “Automatically detect settings” is checked
and all other fields are blank. Then go to Tools/Internet Options/Security and
return your Security settings to “default”. )
5
3. From the Menu on the left select Quick Start.
4. Under PPP add your user name and password as provided by your ISP (only
change VPI and VCI settings and Encapsulation if necessary) and click Apply.
6
5. Click OK.
6. Now click the blue Save Config button.
7
7. Confirm by clicking Apply.
8. Click OK.
8
9. Now restart the router by clicking the blue Restart button
10. Confirm restart of the router by clicking Restart.
9
11. Wait for the router to finish the restart process.
12. Go to the Status Page which should now show a WAN IP address and your
connection status under WAN.
10
13. This completes the initial configuration of the router and you can close down
your browser or Logout. You should now be connected to your Service
Provider. For advanced configuration please access the full manual on the CD
provided.
Telephone Support for Internet Access ONLY is available during office hours from
Mon-Fri 10am–5pm on 0870-8501528. If you are successfully connected to the
Internet and have a support query please contact www.billion.uk.com/esupport and
submit a ticket.
Altri manuali per BiPAC 8500
3
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Billion Router di rete
Billion
Billion BiPAC 5200N Manuale utente
Billion
Billion BiPAC 7560G Manuale utente
Billion
Billion BiPAC 8501 R3 Manuale utente
Billion
Billion BiPAC 7401V(G)PX Manuale utente
Billion
Billion BiPAC 7401VP Manuale utente
Billion
Billion BiPAC 5200G Series Manuale utente
Billion
Billion BiPAC 5100S Manuale utente
Billion
Billion BIPAC 5102G Manuale utente
Billion
Billion BiPAC 7402G Manuale utente
Billion
Billion BiPAC 6200NXL Manuale del proprietario
Billion
Billion BiPAC 7300G RA Manuale utente
Billion
Billion BiPAC 7300M Manuale utente
Billion
Billion BiPAC 4700ZUL Manuale utente
Billion
Billion BiPAC 5200 Manuale utente
Billion
Billion BiPAC 7800NEXL Manuale utente
Billion
Billion BiPAC 6300VNOZ Manuale utente
Billion
Billion BiPAC 7402G Manuale utente
Billion
Billion BiPAC 7300WX Manuale di installazione e funzionamento
Billion
Billion myGuard 7500GL Manuale utente
Billion
Billion BIPAC 7402W Manuale utente
