Billion BiPAC 7800VDOX Manuale utente

Billion BiPAC 7800VDOX

Setup Guide

MODEM REFERENCE & LIGHT STATUS SHEET

On the front of your modem you will notice a number of lights. The below table

explains what each of these lights mean:

LABEL

ACTION

DESCRIPTION

[1] Power

Solid Green

Power is on

Solid Red

Boot failure

Off

Power is off

[2] Ethernet (1-4)

Blinking Green

Transmitting data 1000Mbps

Blinking Orange

Transmitting data 10/100Mbps

Off

No Ethernet connection

[3] Wireless

Solid Green

Wireless connection enabled

Blinking Green

Data flow

[4] WPS

Blinking Green

WPS in progress

Off

WPS disabled

[5] VoIP Ports

Solid Green

Phone is off the hook

[6] PSTN

Solid Green

Phone is off the hook and call is in

progress

[7] DSL

Solid Green

DSL signal established

Blinking Green

Trying to achieve DSL signal

Off

No DSL signal

[8] Internet

Solid Green

Device has connected to the Internet

Blinking Green

Data flow

Solid Red

Authentication failed

1. Getting started

Requirements

1. Any operating system is compatible, however depending on the version this

may affect your internet experience

2. Internet Explorer 6.0 or higher / Firefox 2.0 or higher

3. Ethernet network adapter

4. Wireless enabled computer if you are using the wireless feature

Connecting the Billion BiPAC 7800VDOX to your computer

1. Connect a network cable to the yellow port (numbered ‘4’) located at the

back of the modem

Figure: Billion BiPAC 7800NXL

The other end of your network cable will connect to the UNI-D port on your

NBN ONT

Figure: NBN ONT

2. Connect a second network cable to one of the remaining three yellow ports

located at the back of the modem. The other end will connect directly to your

computer.

3. Finally, connect the power cable to your modem and plug the power adapter

in to your power point. Press the power button to the "ON" state

The diagram on the previous page

(Figure: Billion BiPAC 7800NXL)

shows

how the modem connects physically to your phone line, computer, and power

point.

4. Now that the modem is connected to your computer, phone line and powered

on, you need to ensure that the lights on the modem indicate the following:

Power ON

DSL ON

Ethernet (1-4) ON or Blinking

A network icon will appear in your task bar, and you are now ready to setup

your Internet connection

Note: If you have already connected via Wi-Fi you will see icon below instead.

2. Configuring your modem

Logging in to your modem

1. Open your web browser (typically Internet Explorer/Chrome/Firefox/Safari)

and in the address bar enter the details:

http://192.168.1.254

2. You will be asked for a Username and Password. Enter the following login

details:

Username admin

Password admin

Configuring your NBN modem to access the Internet

1. Once you have logged into your modem, the Billion home page will appear as

shown below. Click on the Quick Start tab on the left hand side to begin the

setup

2. Ensure the following settings have been set, then click on Continue

Main Port Ethernet

3. Enter the Username and Password provided to you, then click on Continue

4. Please wait while the device is being configured

5. Once the settings have been successfully configured, you will now get a

message to configure your wireless connection

6. To configure the Wireless connection, ensure the following settings are

entered.

Wireless check box ticked to Enable

SSID is named (this will be any name you wish to give to your Wireless

Network. By default this is set to wlan-ap-2.4g)

WPA2 Pre Shared Key: This will ensure that in order to connect to your

wireless network a password will be required. Please enter a password

between 8 - 63 characters; this can contain letters and numbers.

7. You will now receive a message that the process is finished. At the bottom of

the page you will see an option to Restart the modem, please click on restart.

8. Please click on Restart with Current Settings to restart the modem

9. Please wait while the modem is restarting. This can take a minutes so please be

patient. The following page will appear when the modem’s updating your

details.

10. Once connected the Internet, the modem light will turn on and flash to indicate

there is internet traffic. Try browsing to a website such as www.google.com to

test your connection

How to configure the 5GHz wireless connection on your

modem

The Billion 7800VDOX has the extra capability to configure a wireless connection in

the 5GHz range.

1. Log in to your router by opening your internet browser and entering

192.168.1.254 in the address bar. Enter the following credentials:

Username admin

Password admin

2. On your left hand side click on Configuration, then select Wireless 5G (wl1)

3. Under your basic settings you can either keep the SSID name as default wlan-

ap-5g or change it to a name of your choosing. Once this is done, click on Apply

4. Now click on Security on the left hand side. Select the Network

Authentication method as Mixed WPA2/WPA-PSK and your passphrase to o

ne of your choosing. Once finished click on Apply

5. Once the settings have been applied click on Restart at the bottom of the

page

Altri manuali per BiPAC 7800VDOX

Indice

Altri manuali Billion Router wireless

Billion

Billion 7800VDP(O)X Manuale utente

Billion

Billion BiPAC 6300NX Manuale di installazione e funzionamento

Billion

Billion BiPAC 6300VNOZ Manuale utente

Billion

Billion 52 Series Guida rapida

Billion

Billion BiPAC 6200WZL R2 Manuale utente

Billion

Billion 400G Manuale utente

Billion

Billion BiPAC 7202 Manuale utente

Billion

Billion BiPAC 6200NXL Manuale utente

Billion

Billion BIPAC-6500 Manuale utente

Billion

Billion BiPAC 5400N R2 Manuale utente

Billion

Billion BiPAC 7800NL Manuale utente

Billion

Billion BiPAC 7300GX Manuale utente

Billion

Billion BiPAC 74xx series Manuale utente

Billion

Billion BiPAC 7404VGO Manuale utente

Billion

Billion BiPAC 7300GX Manuale utente

Billion

Billion BiPAC 7700NR2 Manuale utente

Billion

Billion BiPAC 6404VGP Manuale utente

Billion

Billion BiPAC 8800AXL Manuale utente

Billion

Billion BiPAC 7800DXL Manuale utente

Billion

Billion BiPAC 8900AX(L)-2400 Manuale utente

Billion

Billion 7800DX Manuale utente

Billion

Billion BIPAC 6500 Manuale utente

Billion

Billion BiPAC 6404VGP Manuale utente

Billion

Billion BiPAC 7800NX Manuale del proprietario

Manuali Router wireless popolari di altre marche

Milesight

Milesight UG67 Manuale utente

Airlogic

Airlogic AirSync Class 1 Manuale del proprietario

Samsung

Samsung WCH730B Manuale utente

TELEFONICA

TELEFONICA USB Adapter Manuale utente

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manuale utente

Askey

Askey RAC2V1K Manuale utente

Alloy

Alloy WLF2454AP-S Manuale utente

TP-Link

TP-Link TL-WR542G Manuale utente

NETGEAR

NETGEAR WNR2000v4 Manuale utente

Hama

Hama 53120 Manuale utente

Intellinet

Intellinet 524582 Manuale utente

Asus

Asus RT-N10P Manuale utente

D-Link

D-Link DIR-506L Manuale utente

Sapido

Sapido GR297n Manuale utente

Asus

Asus DSL-N55U Manuale utente

AMTC

AMTC WR7502 Manuale utente

Compaq

Compaq CP-2W - iPAQ Connection Point Manuale utente

SMC Networks

SMC Networks WBR14-N2 FICHE Manuale utente