Binary B-400-1COAX-HDIR Manuale utente

B-400-1COAX-HDIR

OWNER’S MANUAL Binary™ HDMI over Single Coax

Extender with IR Pass-Through

WELCOME TO THE BINARY™ BRAND OF PRODUCTS

This product is engineered to provide years of exceptional reliability. Binary™

is one of the most highly regarded brands available today. We appreciate your

business and we stand committed to providing our customers with the highest

degree of quality and service in the industry.

IMPORTANT SAFETY INSTRUCTIONS

The B-400-1COAX-HDIR HDMI over single coax extender with IR pass-through

has been tested for conformity to safety regulations and requirements, and has

been certied for international use. However, like all electronic equipment, the

B-400-1COAX-HDIR should be used with care. Please read and follow the safety

instructions to protect yourself from possible injury and to minimize the risk of

damage to the unit.

  •Followallinstructionsandwarningsmarkedonthisunit.

  •Donotattempttoservicethisunityourselfexceptwhereexplainedin

this manual.

  •Provideproperventilationandaircirculationanddonotusenearwater.

  •Keepobjectsthatmightdamagethisunitatasafedistanceandensurethat

the placement of this unit is on a stable surface.

  •Useonlythepoweradapter,powercordsandconnectioncablesdesigned

for this unit.

  •Donotuseliquidoraerosolcleanerstocleanthisunit.Alwaysunplugthe

power to the device before cleaning.

PACKAGE CONTENTS

•(1)B-400-1COAX-HDIR(TransmitterandReceiver)

•(4)MountingScrews

•(8)RubberFeet

•(2)5VPowerSupplyUnits

•(1)Usermanual

•(1)IRAdapterCable

INTRODUCTION

The B-400-1COAX-HDIR extends HDMI over a single coax allowing video and audio

transmission up to 400 ft. In addition, the B-400-1COAX-HDIR is equipped with

bi-directional IR pass-through allowing users to send IR control up to a distance

of 400ft, making IR control possible without any additional wires.

FEATURES

 •HDMI1.3acompliant-This unit does NOT support 3D

 •HDCPcompliant

 •SingleRG63GQuadshieldSolidCopper(75ohm)coaxialcableextendsthe

transmission range up to 400 ft. from the HDMI source and supports up to

  1080p60with24-bitcolordepth

 •Upto7.1-channelaudiosupportedincludingDolbyDigital,DTS,andPCM.

This unit does NOT support Dolby True HD, DTS-HD, or LPCM.

 •Videoresolutionssupportedare480i,720p,1080i,and1080p.

This unit does NOT support 480p.

 •Bi-directionalIRwithIRAdapterCabletoconnecttocontrolsystems

 •Wall-mountablehousingdesignforeasyinstallation

Note: The transmission distance is subject to the quality of installed coax cable,

source device, and display. Higher resolutions and longer transmissions require

high quality cabling. RG6 3G Solid copper quadshield 75 Ohm cable and 75

ohm BNC connectors are recommended. Any connections along the transmission

path will reduce the transmission performance.

1. HDMI-IN: Connects to a HDMI source with a HDMI male-to-male cable.

(1 meter or shorter HDMI interconnect cable is recommended)

2. LED: Orange = Power but no HDMI input signal.

Green=PowerandHDMIsignalpresent.

3. MODE (2-pin DIP Switch): Please see table below for detailed information

4. COAX-OUT : Connect a high-quality coaxial cable to this BNC and link to the

receive unit

5. IR Receiver:Infrared3.5mmjackforanIRreceiverorIRadaptercableforconnection

to a control system

6. IR Flasher:Infrared3.5mmjackforanIRasher

7. Screw-locking power jack: Connecttheprovided5VDCpowersupply

TRANSMITTER

NOTE:Transmissiondistanceupto400feetat1080p(24-Bit)

12 3 45 76

INPUTPANEL OUTPUTPANEL

Pin #1 Pin #2 EDID MODE

OFF() OFF)Upto1080p/60with7.1DolbyDigital,DTS,PCMaudiosupport

Alsosupports1080p/30,1080p/24,1080i/60,720p/60,480i/60

ON() OFF()Upto720p/60withStereoaudiosupport

Alsosupports1080p/30,1080p/24,1080i/60,480i/60

OFF() ON()Upto1080p/60withStereoaudiosupport

Alsosupports1080p/30,1080p/24,1080i/60,720p/60,480i/60

ON() ON() EDIDLearningMode

Note: 480p is not supported

8. IR Receiver: Infrared3.5mmjackforanIRreceiver

9. IR Flasher: Infrared3.5mmjackforanIRasher

10. COAX-IN: Connect a high-quality coaxial cable to this BNC and link

to the transmitting unit

11. HDMI-OUT: Connects to a HDMI display with a HDMI male-to-male cable.

(1 meter or shorter HDMI interconnect cable is recommended)

12. LED: Orange = Power but not receiving a signal on the COAX-IN

Green=Powerandsignalpresentonthecoaxcable

13. Screw-locking power jack: Connecttheprovided5VDCpowersupply

EDID LEARNING

1.EnsureDIPSwitches#1and#2aresettoOn-On[-].

2.ConnecttheHDMIdisplayto“HDMI-IN”ontheTransmitterwithaHDMIcable.

3.PowerontheTransmitterbyconnectingthe5VPowerSupply.TheLEDwillbe

orange until the unit learns the EDID.

4.AftertheLEDturnsGREEN,theEDIDLearningprocedureiscomplete.TheLED

will remain green until the HDMI cable is removed.

5.UnplugtheHDMIcablefromthedisplayandfollowtheinstallationinstructions.

DO NOT change the DIP switches or the EDID information will be lost.

RECEIVER

9810 11 12 13

INPUTPANEL OUTPUTPANEL

IR PASS-THROUGH

IR signals can be passed from the transmitter to the receiver over the Coax

cable.EachunitwillneedbothanIRReceiverandanIRFlasher(sold

separately).ThisallowstheunitstoreceiveIRinformationandtransmitit.

CAUTION: Incorrect connection of the IR Flasher and Receiver may result in

IR extender failure. Check carefully before plugging in the IR extender to the

respective IR sockets. Warranty will not cover the damage.

SPECIFICATIONS

IRFlasher

(Episode®IRF-1

or Episode®IRF-2)

IR Receiver

(Episode®IR-SM-3660

or Episode®IR-TT-3660)

Mini Mono Cable

Binary™B3-MonoMini-.5,

B3-MonoMini-1,orB3-MonoMini-2

IRFLASHER

IRADAPTERCABLEFORCONTROLSYSTEMS(INCLUDED)

IRSignal(Tip)

(20-60kHz)

IRSignal(Tip)

(20-60kHz)

IRSignal(Tip)

Grounding

(Sleeve)

Grounding

(Ring)

Grounding

(Ring)

12VDC

(Sleeve)

IRRECEIVER

IRSignal(Tip)

(20-60kHz)

Grounding

(Ring)

12VDC

(Sleeve)

NOTE: This product was specically engineered for Episode®IR products.

Use of the following products is highly recommended (items not included).

IR PASS-THROUGH IR INTEGRATION WITH A CONTROL SYSTEM

The IR Receiver connection on the Transmitter is designed to operate with Episode®

IRproducts.WhenconnectingtheTransmittertoanIRRemoteControlSystemor

Home Automation system to control the display from the control system, it is necessary

toconverttheconnectionfromastereo3.5mm(1/8”)cabletoamono3.5mm(1/8”)

cableandeliminate12VDC.IncludedintheboxisanIRAdapterCabletomakethis

connectionverysimple.First,connectthemaleendoftheIRAdapterCabletotheIR

Receiver jack on the Transmitter. Next, connect a mono

3.5mm(1/8”)cablefromthefemaleendofthe

IR Adapter Cable to the control system.

Test the connections.

INSTALLATION

1.Selecttheappropriatemode(seetransmittersection)orlearntheEDIDfromthe

 displaytothetransmitter(seeEDIDlearningSection).

2.ConnectaHDMIsource(suchasaBlu-rayDiscplayer)tothetransmittingunit.

(1 Meter or shorter HDMI cable is recommended).

3.ConnectaHDMIdisplay(suchasaLCDTV)tothereceivingunit.

(1 Meter or shorter HDMI cable is recommended).

4.ConnectIRFlashers/Receiverstobothtransmittingandreceivingunits.

5.Connectahigh-quality75ohmcoaxcablewith75ohmBNCterminations

between the units, ensuring the cable is tightly connected.

WARNING: Do not make termination to the coax while connected to the extender

6.Pluginthe5VDCpowersupplyunitstothepowerjackofboththetransmitting

and receiving units.

CAUTION: All terminations to the coax cable should be made before connecting to the

extender. Do not make coax terminations if one end of the coax is connected to either

end of the extender.

SPECIFICATIONS

Technical Transmitter Receiver

HDMI Compliance HDMI1.3a(Doesnotsupport3D)

HDCP Compliance Yes

VideoBandwidth Single-link225MHz(6.75Gbps)

VideoSupport 480i/720p/1080i/1080p60(DoesNOTsupport480p)

HDMI over Coax transmission range FullHD[1080p24-bitcolor]–400ft

AudioSupport Surroundsound(upto7.1ch)orstereodigitalaudio

(DoesNOTsupportDolbyTrueHD,DTS-HDorLPCM)

HDMI equalization Auto

InputTMDSSignal 1.2Volts(peak-to-peak)

InputDDCSignal 5Volts(peak-to-peak,TTL)

ESDProtection

[1]Humanbody—±19kV[air-gapdischarge]

&±12kV[contactdischarge][2]Corechipset—±4kV

PCBStack-Up 6-layerboard[impedancecontrol—dierential100Ω;single50Ω]

IR Pass-Through Bi-directional

Input 1xHDMI,1x3.5mm 1xBNC,1x3.5mmIR

Output 1xBNC,1x3.5mmIR 1xHDMI,1x3.5mm

IR Remote Control Carrierfrequency:20-60kHz

HDMI Connector TypeA(19-pinfemale)

BNC connector 75Ωinterlockingsocket

3.5mmConnector 3.5mmjackforIRasherandIRreceiver

Mechanical

Housing Metal enclosure

Dimensions(LxWxH) TXandRXeach3”x3”x1.2”

Weight TX and RX each 11oz

PowerSupply 5VDC4AInterlockingpowersupply

Power Consumption 6Watts(max)

Operation Temperature 32~104°F

StorageTemperature -4~140°F

Relative Humidity 20~90%RH(nocondensation)

*Note:Specicationsaresubjecttochangewithoutnotice.Dimensionsandweightareapproximate.

WARRANTY

2-YearLimitedWarranty

ThisBinary™ProducthasaTwo-YearLimitedWarranty.Thiswarrantyincludespartsand labor repairs on all components found

to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which

havebeenabused,modiedordisassembled.ProductstoberepairedunderthiswarrantymustbereturnedtoSnapAVora

designatedservicecenterwithpriornoticationandanassignedreturnauthorizationnumber(RA).

ForTechnicalSupport:1-866-838-5052

Indice

Altri manuali Binary Estensione

Binary

Binary B-520-EXT-230-RS-W Manuale utente

Binary

Binary B-520-EXT-330-RS-IP Manuale utente

Binary

Binary B-540-EXT-230-RS Manuale utente

Binary

Binary HD-2CAT-1080P-130 Manuale utente

Binary

Binary B-300-HDMATRIX-RCVR Manuale utente

Binary

Binary B-220-1CAT-VGA-A Manuale utente

Binary

Binary B-200-1CAT-HDIR Manuale utente

Binary

Binary B-200-1CAT-HDIR Manuale utente

Binary

Binary B-300-USB2-CATX Manuale utente

Binary

Binary B-210-HDMATRIX-RECVR Manuale utente

Binary

Binary B-520-TX-230-IR Manuale utente

Binary

Binary B-560-EXT-444-70 Manuale utente

Binary

Binary B-350-USB2-CATX Manuale utente

Binary

Binary B-660-EXT-444-40 Manuale utente

Binary

Binary Binary 360 Series Manuale utente

Binary

Binary B760-EXT-444-300 Manuale utente

Binary

Binary B-660-EXT-444-100A Manuale utente

Binary

Binary B-500-EXT-330-RS-IP Manuale utente

Binary

Binary B-200-1CAT-VGA Manuale utente

Binary

Binary B-240-HD-2AC Manuale utente

Binary

Binary B-660-EXT-444-100AS Manuale utente

Binary

Binary HD-1CAT-1080P-130 Manuale utente

Binary

Binary 330 Series Manuale utente

Binary

Binary B-320-HDMATRIX-RCV-W Manuale utente

Manuali Estensione popolari di altre marche

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente