Binary B-260-SWTCH-4X1 Manuale utente
Source | Mute | 2ch
(HDMI Out Audio)
INSTALLATION
MANUAL
4K HDR Switch with IR - 4x1
B-260-SWTCH-4X1
2
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of re or electric shock, read and follow all instructions and warnings in this
manual. Keep this manual for future reference.
1. Do not expose this apparatus to rain or moisture. Do not expose this equipment to dripping
or splashing, and ensure that no objects lled with liquids, such as vases, are placed on the
equipment. Do not use this apparatus near water.
2. Do not remove cover. No user serviceable parts inside.
3. Clean only with a dry cloth.
4. Do not block any ventilation openings. Install according to manufacturer’s instructions.
5. Do not install near any heat sources such as radiators, heat registers, stoves or other
apparatus (including ampliers) that produce heat.
6. Do not override the safety purpose of the polarized or grounding plug. A polarized plug has
two blades, one of which is wider than the other. A grounding plug has two matching blades
and a third grounding prong. The wide blade or the third prong is provided for your safety. If
the provided plug does not t into your outlet, consult an electrician for replacement of the
obsolete outlet.
7. Protect the power cord from being walked on or pinched, particularly at the plug end and
where the power cord is attached to the apparatus.
8. Only use attachments and accessories specied by the manufacturer.
9. Refer all servicing to qualied service personnel. Servicing is required when the apparatus
has been damaged in any way, such as when the power supply cord or plug is damaged,
liquid has been spilled on or objects have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, the apparatus does not operate normally, or it has been
dropped.
10. To completely disconnect this equipment from power, disconnect the power supply cord
from the power outlet.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
CAUTION
CAUTION: TOREDUCE THE RIS K OF
ELECTRICAL SHOCK.
DONOT REMOVE COVER. NOUS ER
SERVICEABLE PARTS INS IDE.
REFER S ERVICING TOQUALIFIED
SERVICE PERSONNEL.
3
FCC WARNINGS
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
TRADEMARKS
Dolby Digital™, Dolby TrueHD™, and Dolby Atmos™ are registered trademarks of Dolby
Laboratories DTS 5.1™, DTS-HD Master Audio™ and DTS:X™ are registered trademarks of DTS,
Inc. All other trademarks and registered trademarks are owned by their respective holders.
4
CONTENTS
1. Product Overview ........................................................................................................................................................5
2. Features .............................................................................................................................................................................5
3. Package Contents ..........................................................................................................................................................5
4. Device Layout ..................................................................................................................................................................6
4.1. B-260-SWTCH-4x1 Front Panel ...................................................................................................................6
4.2. B-260-SWTCH-4x1 Rear Panel .....................................................................................................................6
5. Installation & Wiring ....................................................................................................................................................7
5.1. Installation .............................................................................................................................................................7
5.2. Wiring ......................................................................................................................................................................8
6. Control of the Switch ...................................................................................................................................................9
6.1. Front Panel Button Control ............................................................................................................................9
6.2. IR Remote Control ..............................................................................................................................................9
6.3. RS-232 Control .................................................................................................................................................10
7. Specications ...............................................................................................................................................................11
8. Warranty ........................................................................................................................................................................11
9. Support ...........................................................................................................................................................................11
5
1. PRODUCT OVERVIEW
Thank you for purchasing this product. For proper installation and optimum performance,
please read the instructions in this manual.
B-260-SWTCH-4x1 Switch features HDMI 2.0 and HDCP 2.2 compatibility and supports
resolutions up to 4K@60Hz 4:4:4 8bit, enabling four Ultra HD sources to be switched to one
Ultra HD or non-Ultra HD display. The switch can be controlled manually by a front panel
button, IR remote** and/or serially by RS-232.
2. FEATURES
• 4 to 1 HDMI switch
• HDMI 2.0 with 4K@60 4:4:4 8-bit and HDCP 2.2 compliant
• Supports manual switching
• Supports various control options
• Compact size and easy-to-install
3. PACKAGE CONTENTS
• 1 x B-260-SWTCH-4x1 Switch
• 1 x DC 12V Power Adapter
• 1 x Switch IR Remote (Requires IR receiver, sold separately)
• 1 x Phoenix Male Connector (3.5mm, 3 Pins)
• 2 x Mounting Ears (with Screws)
• 2 x Drywall Screws
• 4 x Rubber Feet
• 1 x Installation Manual
**IR control requires connection to an external control system via an IR extension cable, or use
of an external IR receiver which are sold separately. You can view compatible devices at
https://www.snapav.com/shop/en/snapav/search/infrared
6
4. DEVICE LAYOUT
4.1. B-260-SWTCH-4x1 Front Panel
1 2 3 4
1. POWER LED
On: The device is powered on.
Off: The device is powered off.
2. HDMI IN 1-4 LED
On: The HDMI IN source is selected and active.
Off: The HDMI source is not selected nor active.
3. HDMI OUT LED
On: An HDMI display is connected to the switch.
Off: No HDMI display is not connected to the switch.
4. SWITCH Button
Press to cycle through the active sources, inactive sources will not be selectable.
7
4.2. B-260-SWTCH-4x1 Rear Panel
1 2 3 4 5 6
1. +12V DC
Connect the provided 12Vdc power supply’s cord and tighten it in place.
2. HDMI IN (1-4)
Connect to the output of HDMI source(s) to the input(s) you require.
3. HDMI OUT
Connect to the input of a HDMI display or other similar device.
4. IR Receiver PWR
On: IR receiver port supplies 12V power.
Off: IR receiver port does not supply 12V power.
Note:
• The unit can be controlled through an IR receiver (sold separately) in the ON position.
• The unit can be controlled with a standard mono cable from a control system in the
OFF position.
5. IR EXT.
IR extension port. Connect an IR extension cable, control cable or external IR receiver (not
included) .
When connecting to an unpowered IR receiver or a control device, ensure that the IR
Receiver Power Switch is in the OFF position.
When connecting to a powered IR receiver, ensure that the IR Receiver Power Switch is in
the ON position.
6. RS-232
Connect to a 3rd party RS232 control device for RS232 Control.
8
5. INSTALLATION & WIRING
5.1. Installation
The B-260-SWTCH-4x1 can be placed on a solid and stable surface, installed on a standard
equipment rack shelf, or mounted to a wall or distribution box. When installed on a rack shelf,
wall, or distribution box we strongly recommend that the included mounting ears be used to
secure the device. When installing on a solid surface the use of the mounting ears is optional.
Steps to install the switch using the supplied mounting ears:
1. Attach one of the mounting ears to the enclosure using the screws provided in the package.
2. The mounting ear is attached to the enclosure as shown below.
3. Repeat steps 1-2 for the other side of the switch.
4. Mount the switch on a solid surface, rack shelf, wall, or distribution box with the included
mounting screws by screwing the mounting ears to the surface you are mounting to.
5.2. Wiring
Warning: Before beginning any wiring be sure to disconnect the power from all
devices in the system..
Steps for device wiring:
1. Connect HDMI IN
Connect the HDMI sources (such as PC, Blu-ray player, Apple TV, 4K media player, etc) to
the HDMI IN 1-4. Ensure you are using a high-quality HDMI cable capable of supplying the
maximum resolution you require. .
2. Connect HDMI OUT
Connect the HDMI display device (such as a TV, projector, LED/LCD display or other display
device) to the HDMI OUT. Ensure you are using a high-quality HDMI cable capable of
supplying the maximum resolution you require.
3. Connect additional control options, as required:
• IR Control: Refer to IR Control Wiring section for more details on using IR to control
the switcher.
• RS-232 Control: Refer to RS-232 Control Wiring section for more details on using RS-
232 to control the switcher.
4. Connect the DC 12V power cord provided.
5. Power on all connected devices.
9
4K Media Player
Display
Laptop
HDMI Out
HDMI In
Laptop Desktop PC
Application Diagram 1: Basic Wiring Diagram
5.3. IR CONTROL WIRING
The following diagrams show the different connections and devices used to control the
switcher via IR.
4K Media Player
Display
Laptop
HDMI Out
HDMI In
Laptop Desktop PC
IR Remote
IR Receiver
(Sold Separately)
IR Receiver PWR - On
Application Diagram 2: IR Control via Handheld IR Remote and IR Receiver
NOTE: IR control requires connection to an external control system via an IR extension cable, or use of an
external IR receiver which are sold separately.
Please visit https://www.snapav.com/shop/en/snapav/search/infrared to nd a suitable IR receiver.
10
4K Media Player
Display
Laptop
HDMI Out
HDMI In
Laptop Desktop PC
IR Controller
(Sold Separately)
IR Receiver PWR - O
Application Diagram 3: IR Control via 3rd Party Controller
5.4. RS-232 Control Wiring
The following diagram shows the connection used to control the switcher via RS-232.
4K Media Player
Display
Laptop
HDMI Out
HDMI In
Laptop Desktop PC
RS-232 Control
RX
TX
GND
TX
RX
G
Application Diagram 4: Control via RS-232
Altri manuali per B-260-SWTCH-4X1
1
Indice
Altri manuali Binary Interruttore
Binary
Binary B-260-SWTCH-4X1 Manuale di istruzioni
Binary
Binary B-USB2-HUB4P Manuale utente
Binary
Binary B-USB3-HUB4P Manuale utente
Binary
Binary B-220-HDSWTCH-3x1 Manuale utente
Binary
Binary B-520-MTRX-230-4x4 Guida rapida
Binary
Binary B-660-MTRX-4X2 Manuale utente
Binary
Binary B-660-MTRX-4X2 Manuale utente
Binary
Binary B-240-HDSWTCH-3X1 Manuale utente
Binary
Binary B-900-MOIP-4K-CTRL Manuale utente
Binary
Binary B-300-HDMATRIX-4x4 Manuale utente
