BioQuip 2848BQ Manuale utente
BioQuip Products, Inc. 2321 Gladwick St., Rancho Dominguez, CA 90220 USA
Phone: 310-667-8800 • www.bioquip.com • fax: 310-667-8808 1
CDC Mini Light Trap #2848BQ Assembly Instructions
1) Insert ripstop end of the bag into the lid
with the large cut out opening.
3) Loosely screw the lid onto the cup and
draw the ripstop material out until the
hem of the bag catches on the threads of
the cup.
2) Then fold the edge of the bag
back over the lid.
4) Once in place, tighten the lid to secure
the bag to the collection cup.
BioQuip Products, Inc. 2321 Gladwick St., Rancho Dominguez, CA 90220 USA
Phone: 310-667-8800 • www.bioquip.com • fax: 310-667-8808 2
5) Loosen wing nuts and move bracket to
the edge, but not off of the trap body.
Retighten wing nuts just enough to hold
the bracket in place.
7) Install bulb. Adjust bracket height by
pushing the trap body in until it rests just
short of the bulb, secure in place. Avoid
overtightening the wing nuts as this can
crack the trap head.
6) Place the black plastic rain cover over the
screw on top of the bracket (see red arrow,
left) and install wing knob to secure. Install
so the top bracket is perpendicular to the
lamp holders.
8) Connect the lamp wire (circled in yellow
above). To finish, install the collection
bag by tightening the elastic drawstring
and repositioning the cord lock.
Altri manuali BioQuip Attrezzature da laboratorio
Manuali Attrezzature da laboratorio popolari di altre marche
Agilent Technologies
Agilent Technologies 5800 ICP-OES Manuale utente
Endress+Hauser
Endress+Hauser Cleanfit CPA875 Manuale utente
NI
NI PXI-5422 Manuale
Collomix
Collomix Aqix Manuale utente
SPEX SamplePrep
SPEX SamplePrep 6875 Freezer/Mill Series Manuale utente
Ocean Insight
Ocean Insight FLAME-NIR+ Manuale utente
