Biostar M7TDF Manuale utente

M7TDF

Federal Communications Commission

(F.C.C.) Statement

This device complies with Part 15 of the FCC Rules. Operation of this device is

subject to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Accessories: This device has been tested and found to comply with the limits of a

Class B digital device; the accessories associated with this equipment are as

follows:

1. Shielded serial cable. (Can be obtained from multiple retail outlets)

2. Shielded printer cable. (Can be obtained from multiple retail outlets)

3. Shielded video cable. (Can be obtained from multiple retail outlets)

4. Shielded power cord. (Provided by manufacturer)

These accessories are required to ensure compliance with FCC Rules. It is the

responsibility of the user to provide and use these accessories properly.

This equipment has been tested and found to comply with the limits of a Class B

digital device, pursuant of Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and radiates radio frequency energy

and, if you did not installed and used in accordance with the instructions, may

cause harmful interference in the radio communications. There is no guarantee

that interference will not occur in a particular installation. If this equipment does

cause harmful interference in the radio or television reception, which can be

determined by turning the equipment off and on, you are encouraged to try to

correct the interference by one or more of the following measures:

1. Reorient / relocate the receiving antenna.

2. Increase the separation between the equipment and the receiver.

3. Connect the equipment into an outlet from a circuit where the receiver is

connected.

4. Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by the manufacturer

could void the user’s authority to operate the equipment.

Disclaimer

The vendor makes no representations or warranties with respect to the contents

here of and specially disclaims any implied warranties of merchantability or

fitness for any purpose. Further the vendor reserves the right to revise this

publication and to make changes to the contents here of without obligation to

notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first

obtaining the vendor’s approval in writing.

Trademarks and Remarks

MS-DOS, Windows, Windows NT, Windows 9X, Windows ME ,Windows 2000

and Windows XP are products of Microsoft Corp, with its ownership of trademark,

and are distributed by the vendor under a license agreement.

All trademarks used in this manual are the property of their respective owners.

Canadian D.O.C. Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions

from digital apparatus as set out in the radio interference regulations of the

Canadian Department of Communications.

Cet appareil numbérique n‘émet pas de bruits radioélectriques dépassant les

limites appliquées aux appareils numbériques de Class B préscrits dans le

réglement du brouillage radioélectrique edict par le minister Des Communications

du Canada.

Contents

Introduction ..................................................................................1-1

1. Motherboard Description........................................................1-2

1.1 Features...................................................................................................1-2

1.1.1 Hardware...........................................................................................................1-2

1.1.2 BIOS.................................................................................................................1-7

1.1.3 Software............................................................................................................1-7

1.1.4 Accessories.......................................................................................................1-7

1.2 Motherboard Installation.........................................................................1-8

1.2.1 System Block Diagram....................................................................................1-8

1.2.2 Layout of Motherboard....................................................................................1-9

1.2.3 Quick Reference.............................................................................................1-10

1.3 CPU Installation....................................................................................1-11

1.3.1 CPU Installation Procedure: Socket 478......................................................1-11

1.3.2 CPUFan Header: JCFAN1...........................................................................1-12

1.3.3 System Fan Header: JSFAN1(Optional).....................................................1-12

1.4 RAM Module Installation .....................................................................1-13

1.4.1 Howto install a DIMM Module...................................................................1-13

1.4.2 DIMM.............................................................................................................1-14

1.5 Slots ......................................................................................................1-20

1.5.1 AGP (Accelerated Graphics Port) Slot.........................................................1-21

1.5.2 CNR (Communication Network Riser) Slot................................................1-21

1.5.3 PCI (Peripheral Component Interconnect) Slots..........................................1-21

1.6 Connectors, Headers & Jumpers...........................................................1-22

Contents

1.6.1 Front Panel Connector: JPANEL1 ...............................................................1-23

1.6.2 ATX 20-pin Power Connector: JATXPWR1..............................................1-25

1.6.3 ATX 12V Power Connector: JATXPWR2.................................................1-25

1.6.4 Hard Disk Connectors: IDE1/IDE2..............................................................1-26

1.6.5 Floppy Disk Connector: FDD1.....................................................................1-26

1.6.6 Wake On LAN Header: JWOL1..................................................................1-26

1.6.7 Clear CMOSJumper: JCMOS1...................................................................1-27

1.6.8 Front USB Headers: JUSB2..........................................................................1-27

1.7 Peripheral Port.......................................................................................1-28

1.7.1 PS/2 Mouse / Keyboard Connector: JKBMS1............................................1-28

1.7.2 USB Connector: JUSB1................................................................................1-29

1.7.3 Serial and Parallel Interface Ports..................................................................1-30

1.7.3.1 The Serial Interface: JCOM1/ JCOM2....................................................1-30

1.7.3.2 Parallel Interface Port: JPRNT1 ..............................................................1-32

1.7.4 Game (Joystick/MIDI) Port Connector: JGAME1 .....................................1-33

1.7.5 Audio Port Connectors: JSPKR1/JLIN1/JMIC1.........................................1-33

1.7.6 Audio Subsystem...........................................................................................1-34

1.7.6.1 CD-ROM Audio-In Header: JCDIN1 .....................................................1-34

1.7.6.2 CD-ROM Audio-In Header: JCDIN2 .....................................................1-35

1.7.6.3 Front Audio Header: JAUDIO1...............................................................1-35

1.7.6.4 Telephony Audio Header: JTAD1...........................................................1-35

2. BIOS Setup................................................................................2-1

2.1 Main Menu..............................................................................................2-3

Contents

iii

2.2 Standard CMOS Features........................................................................2-6

2.3 Advanced BIOS Features........................................................................2-9

2.4 Advanced Chipset Features...................................................................2-13

2.5 Integrated Peripherals ...........................................................................2-16

2.6 Power Management Setup.....................................................................2-21

2.7 PnP/PCI Configurations........................................................................2-26

2.8 PC Health Status ...................................................................................2-29

2.9 Frequency Control.................................................................................2-31

3. RAID BIOS Setting (Optional)................................................3-1

3.1 Getting Started ........................................................................................3-1

3.1.1 Introduction.......................................................................................................3-1

3.1.2 Main Features & Benefits................................................................................3-1

3.2 Installation of Driver...............................................................................3-2

3.2.1 Introduction.......................................................................................................3-2

3.2.2 Windows 98/ME/XP.......................................................................................3-2

3.2.3 Windows NT4.0...............................................................................................3-4

3.2.4 Windows 2000.................................................................................................3-6

3.3 Use RAID Administrator ........................................................................3-8

3.3.1 Install RAID Administrator.............................................................................3-8

3.3.2 Run RAID Administrator................................................................................3-9

3.3.3 Create Stripe Array (RAID 0, for Performance)..........................................3-10

3.3.4 Create Mirror Array(RAID 1, for Data Protection)....................................3-15

3.3.5 Add/RemoveSpare Disk...............................................................................3-20

Contents

3.3.6 Synchronize/Validate/Verify Mirror Array..................................................3-21

3.3.7 Create Span Array..........................................................................................3-23

3.3.8 Create 0+1 Array (For Performance & Data Protection)............................3-24

3.3.9 Remove Disk Array.......................................................................................3-27

3.3.10 Set Transfer Mode........................................................................................3-28

3.3.11 Device Status................................................................................................3-29

3.3.12 Hot-swapping Hard Disks of Mirror Array................................................3-30

3.3.13 Event Log.....................................................................................................3-31

3.4 BIOS Configuration.................................................................................32

3.4.1 Enter into BIOS Configuration Utility..........................................................3-32

3.4.2 Create RAID...................................................................................................3-33

3.4.3 Delete RAID...................................................................................................3-34

3.4.4 Rebuild Mirror Array.....................................................................................3-34

3.4.5 Add Spare Disk..............................................................................................3-35

3.4.6 Remove Spare Disk .......................................................................................3-35

3.4.7 Set Disk Mode................................................................................................3-35

3.4.8 Set Boot Disk..................................................................................................3-36

4. Trouble Shooting.......................................................................4-1

Chapter 1 Motherboard Description

1-1

Introduction

System Overview

Congratulations on the purchase of your new system! This motherboard is designed

to takeadvantage of the latest industry technology to provide you with the ultimate

solution in data processing. In the tradition of its predecessors, this motherboard

continues a commitment to reliability and performance and strives for full compliance

and compatibility with industry software and hardware standards.

M7TDF Highlights:

8 Contains on board I/O facilities, which include two serial ports, a parallel port, a PS/2

mouse port, a PS/2 keyboard port, audio ports, USB ports and a game port.

8 Contains on board IDE facilities for IDE devices such as hard disks and CD-ROM

Drives.

8 Supports the Intel Pentium 4®(Socket 478) processor, a leading edge processor which

brings to you the latest technology in micro architecture design, graphics performance,

system bus design, cache architecture and much more.

8 Complies with PC ATX form factor specifications.

8 Supports popular operating systems such as Windows 95/98, Windows NT, Windows

2000, Windows ME, Windows XP, Novell, UNIX, LINUX and SCO UNIX.

Chapter 1 Motherboard Description

1-2

1. Motherboard Description

1.1 Features

1.1.1 Hardware

CPU

−Single Socket-478 for an Intel Pentium ®4 processor.

−Supports the Intel Pentium ®4 processor subset of the Enhanced Mode

Scaleable Bus Protocol.

−Intel Pentium ®4 System Bus interrupt delivery.

−Supports system bus Dynamic Bus Inversion (DBI).

−Supports 32-bit system bus addressing.

Speed

−Runing at 400 MHz Front Side Bus frequency.

−Supports up to 2.2GHz CPU core speeds.

−The 33MHz 32 bit PCI 2.2 compliant.

−The 66MHz AGP 2.0 compliant interface supports 4x data transfer mode.

(Supports only 1.5v AGP electricals.)

Chipset

−Chipset– Intel 82845/82801BA.

−Chipset – Winbond W83627HF.

Chapter 1 Motherboard Description

1-3

DRAM Memory (Chipset Spec)

−Supports 200MHz or 266MHz DDR SDRAM devices.

−Supports 128Mb, 256Mb and 512Mb technologies for x8 and 16 devices.

−Supports DDR-SDRAM channel, 64 wide (72b with ECC).

−No support for DSx16 DIMMs.

Shadow RAM

−Motherboard is equipped with a memory controller providing shadow

RAM and support for ROM BIOS.

Green Functionality

−Supports Award BIOS™ power management functionality.

−Has a power down timer from 1 to 15 minutes.

−Wakes from power saving sleep mode with any keyboard or mouse

activity.

BUS Slots

−One AGP slot.

−One CNR slot (Support Type A CNR only).

−Six 32-bit PCI bus slots.

Flash Memory

−Supports flash memory functionality.

−Supports ESCD functionality.

Chapter 1 Motherboard Description

1-4

Built in IDE Facilities

−Supports four IDE hard disk drives.

−Supports PIO Mode 4, Master Mode, and high performance hard disk

drives.

−Supports disk transfer rates up to 100 MB/second.

−Supports Ultra DMA 33, Ultra DMA 66, Ultra DMA 100 Bus Master

Modes.

−Supports IDE interface with CD-ROM.

−Supports high capacity hard disk drives.

−Supports LBA mode.

AC’97 Sound Codec Onboard

−AC-LINK protocol comfliance.

−AC’97 2.2compliant.

−Energy saving power down modes.

−18-bit full duplex stereo ADC,DACs.

Universal Serial Bus

−Supports two back panel Universal Serial Bus Ports and two front panel

Universal Serial Bus Ports (optional).

−Supports 48 MHz USB.

BIOS Hardware Monitor Function

−Monitors CPU Fan Speed.

−Monitors System Voltage.

−Monitor System Fan Speed.

Altri manuali per M7TDF

Indice

Altri manuali Biostar Scheda madre

Biostar

Biostar G31E-M7 - BIOS Manuale utente

Biostar

Biostar A85W 3D Guida utente

Biostar

Biostar H67MH Guida utente

Biostar

Biostar TG31-A7 Manuale

Biostar

Biostar B550MX/E PRO Manuale utente

Biostar

Biostar M7NCD Pro Guida utente

Biostar

Biostar A960D+V2 Guida utente

Biostar

Biostar N3700NH Manuale utente

Biostar

Biostar H77MU3 Guida utente

Biostar

Biostar U8798 Pro Guida utente

Biostar

Biostar U8568 Manuale utente

Biostar

Biostar TP67B PLUS - BIOS Guida utente

Biostar

Biostar NF520D3 - BIOS Guida utente

Biostar

Biostar GeForce 6100-M9 Manuale utente

Biostar

Biostar I915P-A7 Manuale utente

Biostar

Biostar 6100 AM2 Guida utente

Biostar

Biostar H310MHD3 Manuale utente

Biostar

Biostar BIELK-IHT Manuale utente

Biostar

Biostar A960G Manuale utente

Biostar

Biostar G31D-M7 Guida utente

Biostar

Biostar NF61V Micro AM2 SE Guida utente

Biostar

Biostar MCP6P3 Manuale utente

Biostar

Biostar 915GL-M7 Ultra Manuale utente

Biostar

Biostar B250GT3 Manuale utente

Manuali Scheda madre popolari di altre marche

DFI

DFI SD170 Manuale utente

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Texas Instruments

Texas Instruments ADS8372EVM Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuale utente