HOW TO USE
Turn on the pressure washer (I). The motor starts only if the trigger
of the gun is pulled and shuts off when the trigger is released.
Read instruction manual carefully before operating this machine, check
whether screw, nut loose, oil in crank tank dry. If no oil, shall inject to
half, exchange oil-cork with hole. Not allowed to be working without oil.
Connect one side of high pressure hose to pump body, the other side
connected to spray gun, then connect the inlet hose to inlet connector,
ensure not leakage, open water source, press spray gun, waiting for
drain all air inside then turn on switch, can be use.
How to Use Spray Tips
The quick–connect on the nozzle extension allows you to switch
between four different quick connect spray tips. Spray tips can be
changed while pressure washer is running once spray gun trigger lock
is engaged. The spray tips vary the spray pattern as shown below.
