BitaTek Cyclops-II BTS 700 Manuale di servizio

Setting Guide

Version 1.0

September / 22/ 2014

Cyclops-II BlueTooth Scanner Configuration Guide 2

Table of Contents

1. Device Descriptions ...........................................................................................................4

2. Operation Modes................................................................................................................6

3. Key Function Description ..................................................................................................7

4. LED , Buzzer and Vibration...............................................................................................8

5. Bluetooth Connect Description........................................................................................10

5.1. Specification.........................................................................................................10

5.2. Data transfer via Bluetooth Under Batch mode...................................................10

5.3. SPP Communication............................................................................................. 11

5.3.1. SPP Transfer Data format......................................................................... 11

5.3.2. Host command..........................................................................................12

5.4. HID Communication............................................................................................14

6. USB connect.....................................................................................................................16

6.1. Specification.........................................................................................................16

6.2. USB Mass Storage communication......................................................................16

6.2.1. USB data transfer mode ...........................................................................16

6.2.2. The Data format of data file.....................................................................17

6.3. USB-HID communication....................................................................................18

7. The Suitable use method ..................................................................................................19

8. Simple Setting..................................................................................................................20

8.1. Batch Mode setting...............................................................................................20

8.1.1. Data transfer by USB situation.................................................................20

8.1.2. Data transfer by SPP Master mode situation............................................20

8.1.3. Data transfer by SPP Slave mode situation..............................................21

8.2. Real mode setting under HID communication.....................................................22

8.3. Real mode setting under SPP communication .....................................................22

8.3.1. Real mode setting under SPP master mode..............................................23

8.3.2. Real mode setting under Spp Slave mode................................................23

8.4. Hybrid mode setting under SPP communication .................................................23

8.4.1. Hybrid mode setting under SPP Master mode .........................................24

8.4.2. Hybrid mode setting under SPP Slave mode............................................24

9. System Detail Setting.......................................................................................................26

9.1. Factory Default Setting ........................................................................................26

9.2. The setting Barcode of System.............................................................................30

9.2.1. System mode setting.................................................................................30

9.2.2. HID Communication Setting....................................................................36

Cyclops-II BlueTooth Scanner Configuration Guide 3

9.2.3. SPP Communication Setting ....................................................................39

9.2.4. Batch mode setting...................................................................................43

9.2.5. Barcode Data and Scanner Setting...........................................................47

9.2.6. Alpha-Numerical Setting barcode............................................................69

10. Appendix 1...............................................................................................................74

11. Appendix 2............................................................................................................... 75

Cyclops-II BlueTooth Scanner Configuration Guide 4

1.Device Descriptions

Table - 1

Item

Descriptions

Scan Window

Scanner scans barcode via this window ( DO NOT SCRATCH or

BLOCK )

Power LED

Battery Status

Green light ON: Charging Completed

Green light blinking: Battery Low

Red light ON: Battery Charging in Process

Red light blinking: Charging Failed

Scan LED

Barcode Scanning Result:

Green ON: Barcode decoding success

Red ON: Barcode reading fail (decode time-out error )

Orange blinking: System firmware update in process

Orange ON: System firmware update completed

Bluetooth LED

Bluetooth Communication Status

Blue fast-blinking: Radio Fail, Pairing Started,

Paring Fail, Lost Connection,

Not Connected,

Communication Error

Scan Window

Bluetooth LED

Scan LED

Power LED

SCAN Key

FUNCTION Key

Battery

USB Port & Reset button

Strap Post

Cyclops-II BlueTooth Scanner Configuration Guide 5

Blue slow-blinking: Successful Connection

USB Connection Status( Bluetooth Mode )

Blue ON: USB Connected

Blue slow-blinking: Data Transmitting

Scan Key

Press and hold more then 3 seconds：Power On

Press：Barcode Scan

Function Key

According difference mode it will have difference function, Please

reference【3. Key Function Description】。

Battery

AC Adapter for charging

USB Port

Use USB cable for data transfer.

Reset Button

Press the button, The system will be power off

Strap Post

Hand strap use

Cyclops-II BlueTooth Scanner Configuration Guide 6

2.Operation Mode

This device have three action mode, the default action mode is real mode.

The mode can be changed by scan setting barcode. But, the customer can not change the

mode If the data file（data.txt）have some records not be send out .

The description of mode, please see the follow table.

Table - 2

Action Mode

Description

Real Mode

The scan data will be transferred via Bluetooth connect, and the scan

data will not be transferred and not be saved to data file when the

Bluetooth is disconnect.

HID communication support.

This mode support connection error handshake on SPP.

It need an application to handle the communication handshake and

data receive / send on SPP communication

Batch Mode

The scan data will be saved to this device.

You have two methods to get the scan data

Bluetooth data transfer：You can send the data via Bluetooth SPP

connection.

USB transfer：You can transfer the data file via USB cable connect.

You have two methods to delete the data.

Scan a factory default of setting barcode

Delete the data file after USB connect

Hybrid Mode

The scan data will be transferred via Bluetooth connect, and if

Bluetooth disconnect, the scan data will be saved to the data file, after

Bluetooth reconnect, the records of data file will be transfer to host

device via SPP communication. After transfer complete the records on

the data file will be deleted.

You need an application to handle the handshake under SPP

communication.

USB-HID

Mode

In this mode, the scan data will be transferred via USB cable to Hos. It will

like a USB scanner. You can change to Bluetooth mode by setting, then the

scan data will be transferred via Bluetooth.

The customer can make a decision, according the customer environment to choice the best

mode.

Cyclops-II BlueTooth Scanner Configuration Guide 7

3.Key Function Description

The follow table descript the motion of the status and key function.

Table –3

Motion status

Power

Off

Bath mode

Real mode

Hybrid mode

HID

SPP

Disconnect

SPP

Disconnect

Scan

Key( press

more then

3 seconds)

Power

On1

—

Scan Key

Function

Key

—

Bluetooth

data transfer

and wait state

mode 2

—

Scan Key

—

Scan

Function

Key

—

Delete one

recode of data

file3

Send key

code4

Send

key

code5

Reconnect

Send

Key

code

Reconnect

Reset

Button

—

Reset6

1This BTS700 will auto Power off。

Press Scan key and hold more then 3 seconds on the BTS700, it will start on and load the

system configure.

2When you change it to Bluetooth data transfer mode, BTS700 will wait the host command

from terminal host device include smart phone or tablet device or PC .

3The scan data will be saved to the file of memory. You can delete the same record on the

data file of memory。The last record will be deleted first, even you scan the same data on

the different time. It can not delete multi records on the same time.

It can be set enable or disable according you setting.

4The software keyboard of iPhone, iPad can be call by press Fn key of BTS700 Via

Bluetooth communication, It can be setting enable/disable different Key code to data

transmit..

5It can be setting enable/disable different Key code to data transmit

6The power is off after reset

Cyclops-II BlueTooth Scanner Configuration Guide 8

4.LED , Buzzer and Vibration

The following table is description of the LED display and sound on the different issue.

Data collect status

Scan LED

Vibration

Battery

LED

Bluetooth

LED

Sound

User good scan

Green (50ms)

Vibrate 100ms

User bad Scan

(default 5s scan

timeout, 0.5s~25.5s

timeout setting ranged

0.5s)

Red( 300ms)

Bi, Bi, Bi

Configuration good

scan

Green (100ms)

Vibrate

200ms,100ms

(Time interval

between two

vibrations:30ms)

Bi~, Bi

Configuration bad

scan ( 5 second time

out)

Red( 300ms)

Bu, Bu, Bu

Enter SPP Slave

mode

Bu, Bu

Enter SPP Master

mode

Bi, Bi

Enter HID mode

Bu, Bi

Real mode Power Up

Green

Vibrate 300ms

Batch mode Power Up

Red

Vibrate 300ms

Never reset Date and

Time when Power Up

( Only Batch mode )

Orange Flash

On：300 ms

Off：500 ms

3 Times

Vibrate 300ms

Bu~,Bu~,Bu~

The data file of

memory have data

record When Power

Green Flash

On：300 ms

Off：500ms

3 Times

Vibrate 300ms

Memory Full

Red Flash

On：300 ms

Off：500ms

3 Times

Bu~, Bu~

Delete one record of

data file on the

memory success

Orange

Bi, Bi,

It is not found that

press Fn key to delete

one record Under

Batch mode.

RED

Bu, Bu, Bu

The record format of

data file on memory be

changed

Red( 300ms)

Bu, Bu, Bu

Battery Charging

Red

Cyclops-II BlueTooth Scanner Configuration Guide 9

Battery Charging fail

Red Flash

On：100 ms

Off：100ms

Battery Charging finish

Green

Batter low

Red Flash

On：200 ms

Off：800ms

Bluetooth Paring

Quickly Blue

Flash

wait enter the PIN

code when Bluetooth

paring ( 60 second

time out )

Quickly Blue

Flash

Bi~, Bi~ until

paring ok or

Time out

Bluetooth Paring fail

Quickly Blue

Flash

Bu~,Bu~,Bu~

No Bluetooth connect

Quickly Blue

Flash

Bluetooth connect

success

Vibrate 300ms

Slow Blue

Flash

Bi, Bi

Bluetooth connected

Vibrate 300ms

Slow Blue

Flash

Bluetooth disconnect

or connect fail

Vibrate 300ms

Quickly Blue

Flash

Bu, Bu

Bluetooth reconnected

and data transmit

under batch mode

Red( when the

data

transmitting )

Slow Blue

Flash

Bluetooth reconnected

and data transmit

under Hybrid mode

Red( when the

data

transmitting )

USB connected

Blue On

USB data transmit

Quick Blue

Flash

Press Fn Key to wait 6

seconds while

Bluetooth reconnect.

Blue On

Firmware Updating

Orange Flash

Firmware Update

finish

Orange

Restore Factory

Default

Fast Blinking

Green

Tone ：

Bi：short、High tone Bi~ ：Long、High tone

Bu：short、Low tone Bu~：Long、Low tone

Vibration：

If set vibration on, then enable vibration behave work .

Cyclops-II BlueTooth Scanner Configuration Guide 10

5.Bluetooth Connect Description

5.1. Specification

This BT700 is a wireless interface device, it is follow Bluetooth ver2.1+EDI Class II

specification, include the SPP ( Serial Port Profile ) and HID ( Human Interface Device

Profile) on this device, It must install the same profile on the paring device (ex. iPhone, iPad

or PC ) too for Bluetooth communication.

Specification

Description

Intensity of the

electric wave

Class II

The max distance is 10 M for Bluetooth communication, The

max distance will different according user environment.

Paring

One BTS700 paring with one host device, it can not paring

with more then one host device in the same time.

Communication

SPP ：It is a serial port communication for SPP slave mode or

SPP master mode.

HID：It is Human interface communication.

Authentication &

Encryption

Authentication ：

Default PIN Code is “0000”, it can be changed by

configure barcode.

Encryption ：

The data can be encrypted by Bluetooth communication,

Default is no encryption. It can be enabled / disable by

configure barcode.

※If BTS700 want connect with the iPhone、iPad of Apple product , the iOS of iphone 、

iPad must lately of version 5.0.

※If BTS700 want connect with the product ofAndroid smart phone, the OS of Android

must lately of version 4.0.

※If BTS700 want connect with the BT dongle of PC or NB, the dongle must lately of BT

version 2.0.

5.2. Data transfer via Bluetooth Under Batch

Altri manuali per Cyclops-II BTS 700

Indice

Altri manuali BitaTek Lettore di codici a barre

BitaTek

BitaTek Cyclops 2 Manuale utente

BitaTek

BitaTek GS100 Guida utente

BitaTek

BitaTek Cyclops 1D Manuale di servizio

BitaTek

BitaTek PS800Z Manuale

BitaTek

BitaTek Cyclops Series Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente