BIXOLON SPP-L410 Manuale di istruzioni
Bluetooth Connection Manual
SPP-L410
Rev. 1.00
http://www.bixolon.com
Bluetooth Connection
■
Table of Contents
1. Manual Information........................................................................................................3
2. Precautions....................................................................................................................3
3. Bluetooth Connection Instructions..............................................................................4
3-1 iOS Device..................................................................................................................4
3-2 Android Device. ..........................................................................................................6
4. Troubleshooting.............................................................................................................8
Rev. 1.00 - 2 -
Bluetooth Connection
1. Manual Information
This Bluetooth Connection Manual provides information on the connection of Bluetooth-
enabled iOS devices with the printer (SPP-L410).
We at BIXOLON maintain ongoing efforts to enhance and upgrade the functions and
quality of all our products. In following, product specifications and/or user manual content
may be changed without prior notice.
2. Precautions
2-1 To connect the printer with another device via Bluetooth, the devices must be within
10m of one another. The connection is broken if the distance between devices
exceeds 10m.
2-2 The maximum separating distance may be shortened if transmission obstacles, such
as cement walls, are present.
2-3 If a device (such as a microwave oven, wireless LAN, etc.) that uses the same
frequency is present, transmission may be interrupted. Separate the printer and
Bluetooth-enabled device from such interrupting devices by a distance of at least 5m.
Rev. 1.00 - 3 -
Bluetooth Connection
3. Bluetooth Connection Instructions
3-1 iOS Device
1) Select the icon. 2) Select “Bluetooth”..
3) Select the printer to connect.4) If PIN is required, enter PIN (default : 0000).
Rev. 1.00 - 4 -
Bluetooth Connection
5) Select “Pair” 6) Bluetooth communication is available.
Rev. 1.00 - 5 -
Bluetooth Connection
3-2 Android Device.
1) Select the icon. 2) Select “Bluetooth”.
3) Select the printer to connect. 4) If PIN is required, enter PIN (default : 0000).
Rev. 1.00 - 6 -
Bluetooth Connection
5) Select “OK”. 6) Bluetooth communication is available.
3-2-1 NFC Auto pairing
Referring to 4-2 Android mode, paring process will be simplified by means of using NFC Auto paring function.
(Only, the device should support NFC Read/Write function)
1) Tap your host device to NFC tag 2) If PIN is required, enter PIN (default : 0000).
on a printer. (Following process is the same as 5),6) in 4-2)
Rev. 1.00 - 7 -
Bluetooth Connection
4. Troubleshooting
4-1 Please follow the guide below if Bluetooth is not searched on iOS device.
1) Perform self test to check the printer support iOS mode
- MODE : CLASSIC(iOS Support)
2) Check whether printer is connected to other iOS device. Printer is not able to be
found on your iOS device if it is connected to other iOS device. If STATUS LED
blinks when you press Feed button, it means that printer is connected to other iOS
device.
You need to disconnect the connection to other iOS device, or turn on the printer
again while the paper cover is opened.
* Printer is automatically connected to last iOS device which was connected in iOS
mode. But it does not make a connection to any device, if user turns it on while the
paper cover of it is opened.
4-2 Refer to this, if you see the pop-up message as below
1) “Failed to connect to SPP-L410”
2) The “Failed to connect” message might appear on a screen, since NFC Auto
pairing merely supports Bluetooth paring and does not allow device to device
communication. However, it operates properly.
Rev. 1.00 - 8 -
Bluetooth Connection
Copyright
© BIXOLON Co., Ltd. All rights reserved.
This user manual and all property of the product are protected under copyright law.
It is strictly prohibited to copy, store, and transmit the whole or any part of the manual and
any property of the product without the prior written approval of BIXOLON Co., Ltd.
The information contained herein is designed only for use with this BIXOLON product.
BIXOLON is not responsible for any direct or indirect damages, arising from or related to
use of this information.
• The BIXOLON logo is the registered trademark of BIXOLON Co., Ltd.
• All other brand or product names are trademarks of their respective companies or
organizations.
BIXOLON Co., Ltd. maintains ongoing efforts to enhance and upgrade the functions and
quality of all our products.
In the following, product specifications and/or user manual content may be changed
without prior notice.
Caution
Some semiconductor devices are easily damaged by static electricity. You should turn the
printer “OFF”, before you connect or remove the cables on the rear side, in order to guard
the printer against the static electricity. If the printer is damaged by the static electricity, you
should turn the printer “OFF”.
Rev. 1.00 - 9 -
Indice
Altri manuali BIXOLON Etichettatrice
BIXOLON
BIXOLON XD Series Istruzioni per l'installazione
BIXOLON
BIXOLON SLP-TX220E Manuale utente
BIXOLON
BIXOLON XL5-40CT Series Manuale utente
BIXOLON
BIXOLON SLP-TX400 Manuale utente
BIXOLON
BIXOLON SRP 770 - B/W Direct Thermal Printer Manuale utente
BIXOLON
BIXOLON SLP-DL410B Manuale utente
BIXOLON
BIXOLON SSP-L410 Manuale utente
BIXOLON
BIXOLON SLP-DL410KV Manuale utente
BIXOLON
BIXOLON XD3-40t Manuale utente
BIXOLON
BIXOLON SLP-DL413KV Manuale utente
BIXOLON
BIXOLON SLP-TX400R Manuale utente
BIXOLON
BIXOLON SLP-DL413 Manuale utente
BIXOLON
BIXOLON XD Series Manuale di istruzioni
BIXOLON
BIXOLON SLP-TX400E Manuale utente
BIXOLON
BIXOLON XM7-40 Manuale utente
BIXOLON
BIXOLON XT Series Manuale di istruzioni
BIXOLON
BIXOLON XD5-40t Manuale utente
BIXOLON
BIXOLON SLP-TX223B Manuale utente
BIXOLON
BIXOLON SRP-E770III Series Manuale utente
BIXOLON
BIXOLON XQ-840 Series Manuale utente
