BIXOLON BGT-100P Manuale utente
Unified POS Utility Manual
Thermal Printers
Rev. 1.13
BGT-100P Printer
BGT-102P Printer
SRP-Q300 / SRP-Q302
SRP-S300
SRP-380 / SRP-382
SRP-F310II
SRP-F312II
SRP-F313II
SRP-350plusIII
SRP-352plusIII
SRP-350III / SRP-352III
SRP-350IIOBE
SRP-330
SRP-330II / SRP-332II
SRP-340II / SRP-342II
STP-103III
SPP-100II
http://www.bixolon.com
Rev. 1.13
- 2 -
■Table of Contents
1. Foreword ........................................................................................................................3
2. Operating System (OS) Environment...........................................................................3
3. Usage Preparation.........................................................................................................4
4. Unified POS Utility Usage .............................................................................................5
4-1 VMSM.........................................................................................................................5
4-1-1 Getting the Memory Switch Status of the Printer..........................................5
4-1-2 Setting the memory switch status of the Printer...........................................6
4-1-3 Paper Save Mode ........................................................................................9
4-1-4 Serial communication Setting.......................................................................9
4-1-5 Bluetooth configuration...............................................................................10
4-1-6 Maintenance counter..................................................................................11
4-2 NV Image Tool..........................................................................................................12
4-2-1 NV Function Option....................................................................................12
4-2-2 Image List Management.............................................................................13
4-2-3 Correction image........................................................................................13
4-2-4 Download the image ..................................................................................14
4-2-5 Print the image...........................................................................................15
4-3 Using the Command Test Editor...............................................................................16
Rev. 1.13
- 3 -
1. Foreword
The Unified POS Utility can be used for various purposes.
Details on the usage of each function are described as follows.
1) VMSM(Virtual Memory Switch Manager)
This function is used to set the virtual memory switch used for the thermal printer
suitable for the user’s environment.
2) NV Image Tool(Non-Volatile Image Tool)
This function helps you to download user-defined images to the flash memory in the
printer and to recall and print those images with fast speed.
3) Command Test Editor
This function is used to test printing-related commands and create a brief label sample
for test printing.
We at BIXOLON maintain ongoing efforts to enhance and upgrade the functions and
quality of all our products. In following, product specifications and/or user manual content
may be changed without prior notice.
2. Operating System (OS) Environment
The following operating systems(OS) are supported for usage.
Microsoft Windows XP SP3 (32bit, 64bit)
Microsoft Windows Server 2003 SP1 (32bit)
Microsoft Windows Server 2003 (64bit)
Microsoft Windows VISTA (32bit, 64bit)
Microsoft Windows Server 2008 (32bit, 64bit)
Microsoft Windows Server 2008 R2 (64bit)
Microsoft Windows 7 (32bit, 64bit)
Microsoft Windows 8 (32bit, 64bit)
Microsoft Windows Server 2012 (64bit)
Microsoft Windows 10 (32bit, 64bit)
Rev. 1.13
- 4 -
3. Usage Preparation
1) Printer and PC Connection.
Connect the printer and PC via the interface cable.
(The interfaces available for usage are Serial, Parallel, USB and Ethernet.)
2) Unified POS Utility Program Execution.
The program can be installed from the accompanying CD, and Latest file versions can
be downloaded from the BIXOLON website. (http://www.bixolon.com)
3) Select the interface type and communication conditions.
4) Click on the “Connect” Button. If the conection is successful, the inactive buttons
become active with the message “The printer is connected”.
If the connection fails, the following error message appears. “Cannot open port”.
Rev. 1.13
- 5 -
4. Unified POS Utility Usage
4-1 VMSM
This function is used to set the virtual memory switch used for the thermal printer suitable
for the user’s environment.
If the Communication Setting is OK, click the “VMSM” button.
4-1-1 Getting the Memory Switch Status of the Printer
1) Click the “Get Status” button. It gets the status of the Printer Setting.
2) The “Memory switch” Tab in the Printer Status window displays the current virtual
memory switch settings of the printer, and allows new settings to be defined.
3) The “Printer Setting” Tab displays printer information, and code page information, and
allows new settings to be defined.
Rev. 1.13
- 6 -
4-1-2 Setting the memory switch status of the Printer
After getting the memory switch status of the printer, the status of the printer can be
modified.
1) “Get Status”
Pressing this button displays the current memory switch settings read from the printer.
2) “Set Status”
Pressing this button allows the user to designate switch settings of the printer.
3) “Save Status”
Pressing this button saves the current memory switch settings to file.
4) “Load Status”
Pressing this button loads and displays the previously-saved memory switch settings file.
5) “Initialize Status”
Pressing this button resets the memory switch settings.
Rev. 1.13
- 7 -
6) Code page
The user may select and set the code page.
7) Cutter Depth Adjustment
Supported Model : SRP-380/382, SRP-S300, SRP-Q300/Q302
You can set the paper width which is not cut when using a partial cut operation.
Rev. 1.13
- 8 -
8) 90 Degree Rotation Mode
Supported Model : SRP-S300L(Liner-free Model), SRP-S300T
Texts prints with 90 degree rotation. (eg: N to Z)
9) Back-Feeding Mode
Supported Model : SRP-S300L(Liner-free Model), SRP-S300T
Reverse feeds the paper to the specific position before the start of printing.
10) Automatic feed in idle mode
Supported Model : SRP-S300L(Liner-free Model), SRP-S300T
Feeds the paper at every specified time interval when the printer is in the sleep mode.
11) Black Mark cut position
Supported Model : SRP-S300L(Liner-free Model), SRP-S300T
Cut after feeding the paper to the default cutting position or black-mark position.
Rev. 1.13
- 9 -
4-1-3 Paper Save Mode
Supported Model
- SRP-350III/352III, SRP-350plusIII/352plusIII, SRP-F310II/F312II/F313II, SRP-380/382,
BGT-100P/102P, SRP-330II/332II, SRP-340II/342II, SRP-S300, SRP-Q300/Q302
You can select the levels of “Paper Save” and the feature of “Cutting Position Correction”
in the “Paper Save Mode” section (tab).
4-1-4 Serial communication Setting
Supported Model : SPP-100II
Serial Communication and Special Function setting can be enabled in Serial
Communication Setting Tab.
Rev. 1.13
- 10 -
4-1-5 Bluetooth configuration
Supported Model
- SRP-350IIOBE, SRP-350plusIII/352plusIII, SRP-F310II/F312II/F313II, SRP-380/382,
SRP-S300, SRP-Q300/Q302
Bluetooth setting can be changed by Bluetooth Configuration Tab.
In case of Serial(Bluetooth) communication, it is not able to check Bluetooth configuration.
■Authentication & Encryption
Sets or cancels Authentication & Encryption mode when connecting via Bluetooth
* If Authentication & Encryption mode is disabled, connection to a device can be done
without a PIN Code.
■Connection Mode
Sets Mode1, Mode2, or Mode3 when connecting via Bluetooth.
- Mode1: connection possible only with the first device with which connection succeeds
- Mode2: connection with all Bluetooth enabled devices possible via use of a PIN Code
- Mode3: connection possible only with the first device with which connection succeeds
and searching or use of connected device possible
■PIN Code
Changes the PIN Code required for Bluetooth connections.
(maximum 12 characters long)
■Device Name
Changes the device name produced when establishing a Bluetooth connection.
(maximum 12 characters long)
■MFi Information
In case of iOS mode, MFi information will be displayed.
■Auto Reconnection
Retry setting on Bluetooth can be enabled when Bluetooth connection is released.
Altri manuali per BGT-100P
2
Questo manuale è adatto per i seguenti modelli
21
Indice
Altri manuali BIXOLON Stampante
BIXOLON
BIXOLON SLP-D420 Manuale del proprietario
BIXOLON
BIXOLON SRP-275II Manuale utente
BIXOLON
BIXOLON Bixolon SRP-270 Manuale utente
BIXOLON
BIXOLON SRP-Q200 Manuale utente
BIXOLON
BIXOLON SRP-350plusIII SRP-352plusIII Nota di rilascio
BIXOLON
BIXOLON SRP-275 Manuale utente
BIXOLON
BIXOLON SLP-DX220 Manuale utente
BIXOLON
BIXOLON SPP-R200 Istruzioni operative
BIXOLON
BIXOLON SRP-150 Manuale utente
BIXOLON
BIXOLON SRP-350 PlusA Manuale utente
BIXOLON
BIXOLON SPP-R200II Manuale utente
BIXOLON
BIXOLON SRP-500 Istruzioni per l'installazione
BIXOLON
BIXOLON SRP-350IIOBE Manuale utente
BIXOLON
BIXOLON XM7-30 Manuale utente
BIXOLON
BIXOLON SPP-R310 Manuale utente
BIXOLON
BIXOLON SPP-R200II Manuale utente
BIXOLON
BIXOLON SPP-R410 Manuale utente
BIXOLON
BIXOLON SPP-R220 Manuale di istruzioni
BIXOLON
BIXOLON SRP-350plusA&C Manuale utente
BIXOLON
BIXOLON Bixolon SRP-270 Manuale utente
