BIXOLON SPP-L310 Manuale utente

Wi-Fi Connection Manual

SPP-L310

Rev. 1.00

http://www.bixolon.com

Rev. 1.00

- 2 -

Wi-Fi Connection Manual

■

Table of Contents

1. Manual Information........................................................................................................3

2. Precautions ....................................................................................................................3

3. How to Connect..............................................................................................................4

3-1 Android Soft AP mode (default)..................................................................................6

3-2 iOS Soft AP mode (default) ........................................................................................7

3-3 How to change infrastructure mode............................................................................8

4. Factory Reset...............................................................................................................10

Rev. 1.00

- 3 -

Wi-Fi Connection Manual

1. Manual Information

This WLAN manual provides information on the connection of wireless network with the

mobile printer.

2. Precautions

2-1 The printer has to be within 100m(Out door) from AP(Access point) to connect

WLAN. Although 35m is able to communicate in door, WLAN could be affected by

environment to be shorten.

The printer's Status LED shows the connection status of the wireless LAN.

- Green : Indicates that the wireless LAN is connected normally

- Red : Indicates that the WLAN password is wrong

- Off : Indicates that theAP of the set SSID is not nearby

2-2 The maximum separating distance may be shortened if transmission obstacles, such

as cement walls, are present

2-3 If a device (such as a microwave oven, wireless LAN, etc.) that uses the same

frequency is present, transmission may be interrupted. Separate the printer and

Bluetooth-enabled device from such interrupting devices by a distance of at least 5m.

Rev. 1.00

- 4 -

Wi-Fi Connection Manual

3. How to Connect

WLAN can be configured through the printer’s WLAN interface. Likewise, WLAN can also

be configured though the printer’s Serial/USB interfaces.

(1) Connecting Printer

1) Serial / USB cable

Connect Serial/USB cable to Printer, PC device.

When Serial cable use, baudrate between Device and printer should be the same.

2) WLAN

Connect to the AP (Access Point) configured in Infrastructure mode in order to connect to

the LAN/wireless network

Infrastructure mode

In order to configure the network between the wireless host device and the printer, set the

printer to Soft AP Mode.

Soft AP mode

A P

Rev. 1.00

- 5 -

Wi-Fi Connection Manual

(2) Checking Network Setting

Self-test

While the printer is turned off, turn on the printer while pressing the feed button.

The printer setting values will then be printed.

Power

FEED

Rev. 1.00

- 6 -

Wi-Fi Connection Manual

3-1 Android Soft AP mode (default)

1) Select “Wi-Fi”. 2) Select the printer to connect

3) Select “CONNECT”. 4) Wi-Fi communication is available.

Rev. 1.00

- 7 -

Wi-Fi Connection Manual

3-2 iOS Soft AP mode (default)

1) Select “Wi-Fi”. 2) Wi-Fi ON and Select the printer to connect

3) Wi-Fi communication is available

Rev. 1.00

- 8 -

Wi-Fi Connection Manual

3-3 How to change infrastructure mode

1) Enter the IP address of the printer in the address bar, and the following login window will

pop up. Enter the ID and Password set for the printer, and then click [LOG IN] (Default

User Name: admin, Password: password)

2) Select “Wireless” to change Wi-Fi mode.

Rev. 1.00

- 9 -

Wi-Fi Connection Manual

3) Select “infrastructure”, and set SSID, WLAN Security Type.

4) Reboot the Printer.

Rev. 1.00

- 10 -

Wi-Fi Connection Manual

4. Factory Reset

This function changes the WLAN settings of the printer to the initial factory settings.

Method

Open the paper cover, press the FEED button, press the printer power button to turn on

the printer, and close the cover when a beep sounds.

“Hexadecimal Dump”

“To terminate Hexadecimal dump”

“press FEED button three times!!”

“To change WLAN setting values”

“factory default”

“press POWER button three times!!”

When the above message is printed, press the power button 3 times.

Factory Reset Values

System

Printer Name

*Printer model

Printer Port Num

9100

User ID

admin

User Password

password

Enc / Auth

Encryption

None/Open

Network

Network Mode

Soft AP mode

SSID

PRINTER_{MAC address}

Inactivity time

IP Assignment Method Manual (DHCP server)

IP, Subnet, Gateway

IP : 192.168.1.1

Subnet : 255.255.255.0

Gateway : 192.168.1.2

Specification

Feature

Implementation

Operation Mode

Infrastructure, Soft AP, Ad-hoc, Wi-Fi Direct

Wireless Standard

IEEE 802.11b/g/n, IEEE 802.11a/b/g/n

Range

Up to 100m free space (Outdoor)

Security

WEP64/128

WPA1/2 – PSK

WPA 1/2 – Enterprise

(EAP-TLS, EAP-TTLS, PEAP, LEAP, EAP-FAST)

Management

WLAN Configuration tool, HTTP, Smart connection APP

Indice

Altri manuali BIXOLON Stampante

BIXOLON

BIXOLON SPP-A200 Manuale utente

BIXOLON

BIXOLON SRP-330II Manuale di installazione e funzionamento

BIXOLON

BIXOLON SPP-R200II Manuale utente

BIXOLON

BIXOLON STP-131 Manuale utente

BIXOLON

BIXOLON SRP-QE300 Manuale utente

BIXOLON

BIXOLON SPP-R310PLUS Manuale utente

BIXOLON

BIXOLON SRP-350plusIII SRP-352plusIII Istruzioni per l'installazione

BIXOLON

BIXOLON SRP-350IIOBE Manuale utente

BIXOLON

BIXOLON SRP-350plusA&C Manuale utente

BIXOLON

BIXOLON Bixolon SRP-270 Manuale utente

BIXOLON

BIXOLON SRP-382 Manuale di installazione e funzionamento

BIXOLON

BIXOLON SRP-352III Manuale utente

BIXOLON

BIXOLON SPP-R200II Istruzioni per l'installazione

BIXOLON

BIXOLON XM7-30 Manuale utente

BIXOLON

BIXOLON SRP-E300 Manuale utente

BIXOLON

BIXOLON SPP-R200III Manuale utente

BIXOLON

BIXOLON SRP-F310 Manuale utente

BIXOLON

BIXOLON SRP-275II Manuale utente

BIXOLON

BIXOLON SRP-350II Manuale utente

BIXOLON

BIXOLON SRP-S300 Manuale utente

BIXOLON

BIXOLON SPP-R310 Manuale utente

BIXOLON

BIXOLON SRP-275 Nota di rilascio

BIXOLON

BIXOLON SRP-332II Istruzioni per l'installazione

BIXOLON

BIXOLON SRP-275 Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente