BIXOLON SRP-330II Manuale utente

User's Manual

Network Interface

Rev. 1.00 SRP-330II

SRP-332II

http://www.bixolon.com

Rev. 1.00

- 2 -

Network Interface

■Table of Contents

1. Manual Information........................................................................................................3

2. Specifications ................................................................................................................3

3. How to Connect..............................................................................................................4

4. Ethernet Test by using Windows Test Page................................................................5

5. Factory Reset.................................................................................................................9

6. Troubleshooting...........................................................................................................10

Rev. 1.00

- 3 -

Network Interface

1. Manual Information

This Network manual provides information on the connection of network with the printer.

We at BIXOLON maintain ongoing efforts to enhance and upgrade the functions and

quality of all our products. In following, product specifications and/or user manual content

may be changed without prior notice.

2. Specifications

CATEGORIES

FEATURE

IMPLEMENTATION

LAN

Specification

Interface

10/100 Base-T All in one(Auto detection)

Protocol

DHCP Client, HTTP, ARP, ICMP, IPv4 ,TCP, UDP

Rev. 1.00

- 4 -

Network Interface

3. How to Connect

1) Checking Network Setting

(1) LAN

Function key

a. Turn on the printer.

b. Wait 10 or more seconds until the LAN interface boots up.

c. Push the function key.

d. The settings will be printed only one time since the printer is turned on.

2) LAN Setting Values

Classification

Item

Remarks

Input Range

Network

Inactivity Time

TCP connection hold time

0~3600 integer

IP Assignment

Method

IP Assignment Method

DHCP/Manual

IP Address

Printer IP

IP Address

Subnet Mask

Subnet mask

IP Address

Gateway

Default Gateway

IP Address

For changing network setting values using Net configuration tool, Refer to „Net

configuration tool manual‟.

Function key

Rev. 1.00

- 5 -

Network Interface

4. Ethernet Test by using Windows Test Page

You can use the Windows printer driver as shown below when there is no test program.

Operating systems that allow you to use the Windows printer driver are Windows, XP,

Server 2003, VISTA, 2008 Server, 7, 8, 10.

[Note]

-The Windows driver is included in the CD, and you can download the latest version

from our home page.

(www.bixolon.com)

1) Double-click the Windows Driver installation file.

2) Click Next.

3) Select Ethernet.

Rev. 1.00

- 6 -

Network Interface

4) Enter the IP address and port number, and then click Next.

5) Click Yes to reboot the PC.

6) Open the printer properties window in the Windows OS.

(1) Installing on Windows XP / Server 2003

※Control Panel –Printers and Faxes.

(2) Installing on Windows VISTA / Server 2008 / 7 / 8 / Server 2012 / 10

※Control Panel –Hardware and Sound –Device and Printers.

7) In the Ports tab, click Configure Port.

Rev. 1.00

- 7 -

Network Interface

8) Match the communication settings to those of the printer.

Rev. 1.00

- 8 -

Network Interface

9) Click Print Test Page and check printing status. Proper installation of the driver is

indicated if the test page is printed normally.

Rev. 1.00

- 9 -

Network Interface

5. Factory Reset

This function changes the WLAN settings of the printer to the initial factory settings.

Follow the instructions shown below to perform the Factory Reset.

1) Default Printer Settings

- Dynamic IP mode(DHCP mode is enabled.)

- Local Port: 9100

- Inactivity Time: 0

2) Procedure

(1) Turn the printer off.

(2) Turn the printer on while pressing the Function key.

[Note]

- Keep holding the Function key for about three seconds.

(3) Wait for about 10 seconds until IP address is assigned.

DHCP mode will be enabled when Factory Reset is performed regardless of the

existing settings.

[Note]

- Dynamic IP network environment

IP address is assigned to the printer and it can connect to web-server using the

assigned IP address.

Newly assigned IP address can be checked with the Function key.

- Fixed IP network environment

IP address is not automatically assigned to the printer.

Wait for 30 seconds and check whether IP address is assigned to the printer by

pressing the Function key. If IP address is 0.0.0.0, it means that IP address has

not been assigned. In this case, disable DHCP mode using the Configure Tool.

(4) Print the settings environment using the Function key.

Check the assigned IP address and connect to the web-server to change the settings.

3) Factory Reset Values

LAN

Network

Inactivity time

IP Assignment Method

Automatic(DHCP)

Rev. 1.00

- 10 -

Network Interface

6. Troubleshooting

When printing doesn‟t work

Check network setting

(Refer to Configuration for checking/changing the printer settings)

- IP Address

Check the band of the IP Address.

Check whether the bands of the printer and the AP(or wireless

terminals) are the same.

The first three digits of the four digit value of the IP address must be

the same.

- Subnet Mask

Check whether the subnet mask of the printer matches the one in AP

(or wireless terminal).

- Port

Check whether the port configured in the printer and the host (PC,

PDA) are the same.

PING Check

Checking IP collision

- When entering IP address manually without using DHCP, you must

check whether the corresponding IP address is used by other

equipment. The printer may not work normally when there is a

collision in the IP address.

- When the printer is turned off, carry out the Ping Test to the printer IP.

Ping TEST - Turn off the printer.

- Select “Run” from the Windows Start menu, and then enter “cmd”.

- Enter “ARP –d” and delete ARP table.

- Enter “ping {printer IP}”.

- ARP –d, ping {IP address}

Altri manuali per SRP-330II

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali BIXOLON Stampante

BIXOLON

BIXOLON SRP-330III Manuale utente

BIXOLON

BIXOLON SPP-R310PLUS Manuale utente

BIXOLON

BIXOLON SRP-350 PlusA Manuale utente

BIXOLON

BIXOLON SRP-330 Manuale utente

BIXOLON

BIXOLON STP-103 Manuale utente

BIXOLON

BIXOLON SRP-275II Manuale utente

BIXOLON

BIXOLON SPP-R410 Manuale utente

BIXOLON

BIXOLON SRP-350 PlusA Manuale utente

BIXOLON

BIXOLON SRP-350 PlusA Manuale utente

BIXOLON

BIXOLON STP-103III Manuale utente

BIXOLON

BIXOLON BK5-31 Manuale utente

BIXOLON

BIXOLON Bixolon SRP-270 Manuale utente

BIXOLON

BIXOLON SRP-330II Manuale utente

BIXOLON

BIXOLON DX420 Manuale utente

BIXOLON

BIXOLON XQ-840II Series Manuale utente

BIXOLON

BIXOLON SRP-F310II Manuale utente

BIXOLON

BIXOLON SRP-S3000 Manuale di istruzioni

BIXOLON

BIXOLON SRP-Q300II Istruzioni per l'installazione

BIXOLON

BIXOLON TX Series Manuale di istruzioni

BIXOLON

BIXOLON SPP-R400II Manuale utente

BIXOLON

BIXOLON SRP-350II Manuale utente

BIXOLON

BIXOLON SPP-R300 Manuale utente

BIXOLON

BIXOLON SRP-275 Manuale utente

BIXOLON

BIXOLON SRP-350III Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente