BIXOLON SRP-S200 Manuale di istruzioni
Ver. 1.00
- 2 -
SRP-S200
Table of Contents
1. Manual Information ............................................................................................ 3
2. Specifications........................................................................................................ 3
3. How to Connect .................................................................................................... 4
3-1 Checking Network Setting...................................................................................................................... 4
3-1-1 LAN.............................................................................................................................................. 4
3-1-2 LAN Setting Values.................................................................................................................... 5
4. Ethernet Test by using Windows Test Page....................................................... 6
5. Troubleshooting................................................................................................. 13
Ver. 1.00
- 3 -
SRP-S200
1. Manual Information
This manual provides information on the connection of wireless network with the
printer.
This document contains proprietary information of BIXOLON and its affiliates.
You may utilize the information solely for the purpose of facilitating authorized sales
and service of, or developing software and similar products for authorized use with,
BIXOLON products, provided that such proprietary information may not be used,
reproduced, or dis-closed to any other parties for any other purpose without the
prior written permission of BIXOLON.
BIXOLON has no liability for loss or damage arising from or relating to your use of
the information in the document.
© BIXOLON Co., Ltd. All rights reserved.
We at BIXOLON maintain ongoing efforts to enhance and upgrade the functions and
quality of all our products. In following, product specifications and/or user manual
content may be changed without prior notice.
2. Specifications
CATEGORIES
FEATURE
IMPLEMENTATION
LAN
Specification
Interface
10/100 Base-T All in one(Auto detection)
Protocol
DHCP Client, HTTP, ARP, ICMP, IPv4, TCP, UDP
Ver. 1.00
- 4 -
SRP-S200
3. How to Connect
LAN can be configured through the printer’s LAN interface.
3-1 Checking Network Setting
3-1-1 LAN
After the printer has finished booting, open the printer cover and press and hold the
FEED Button. This will cause the interface setting confirmation mode.
Then add the paper, close the cover, and check that the following message is printed.
FEED Button
Cover Open Lever
Ver. 1.00
- 5 -
SRP-S200
If the above message is printed, select Mode 1, and you will see the following LAN
data. (To select Mode 1, press the Feed button once quickly/ once long.)
3-1-2 LAN Setting Values
Classification
Item
Description
Input Range
Network
Inactivity Time
TCP connection hold time
0~3600 integer
IP Assignment
Method
IP Assignment Method DHCP/Manual
IP Address
Printer IP
IP Address
Subnet Mask
Subnet mask
IP Address
Gateway
Default Gateway
IP Address
Note
For changing network setting values using Net configuration
tool, Refer to ‘Net configuration tool manual’.
Checking Interface Setting
0: Exit
1: LAN Information Print
2: LAN Factory Reset and Reboot Printer
3 or more: None
Select Modes by Feed button control
as below.
Step 1. Short-press as many times as
The mode number to choose.
Step 2. Long-press over 1 second.
*e.g. To choose Mode 2, press Feed
Button 3 times(short-short-long)
Ver. 1.00
- 6 -
SRP-S200
4. Ethernet Test by using Windows Test Page
You can use the Windows printer driver as shown below when there is no test
program. Operating systems that allow you to use the Windows printer driver are
Windows, XP, Server 2003, VISTA, 2008 Server, 7, 8, 10.
Note
You can download the latest version of Windows driver from
our home page. (www.bixolon.com)
1) Double-click the Windows Driver installation file.
2) Click Install.
Ver. 1.00
- 7 -
SRP-S200
3) Select Installation and click Next..
4) Select Model Name and click Next.
Ver. 1.00
- 8 -
SRP-S200
5) Select Ethernet and click Add TCP/IP Port.
6) Enter the IP address and port number, and then click Next.
Ver. 1.00
- 9 -
SRP-S200
7) Click Next.
8) Click Next.
Ver. 1.00
- 10 -
SRP-S200
9) Click Next.
10) Click Finish.
Altri manuali per SRP-S200
3
Indice
Altri manuali BIXOLON Stampante
BIXOLON
BIXOLON XM7-20 Manuale di istruzioni
BIXOLON
BIXOLON SRP-S320 Manuale utente
BIXOLON
BIXOLON SPP-R200III Manuale di istruzioni
BIXOLON
BIXOLON SPP-R210 Manuale di istruzioni
BIXOLON
BIXOLON SRP-350 PlusA Manuale utente
BIXOLON
BIXOLON SPR-350III Manuale di installazione e funzionamento
BIXOLON
BIXOLON Bixolon SRP-270 Manuale utente
BIXOLON
BIXOLON SRP-S200 Manuale utente
BIXOLON
BIXOLON SRP-350plusII Manuale utente
BIXOLON
BIXOLON SRP-350 PlusA Manuale utente
BIXOLON
BIXOLON SPP-L410K5L Manuale utente
BIXOLON
BIXOLON STP-103II Manuale utente
BIXOLON
BIXOLON SRP-350plusIII SRP-352plusIII Nota di rilascio
BIXOLON
BIXOLON SRP-350IIOBE Manuale utente
BIXOLON
BIXOLON SRP-350plusV Manuale utente
BIXOLON
BIXOLON SRP-350PG - SRP 350 B/W Direct Thermal... Manuale utente
BIXOLON
BIXOLON Bixolon SRP-270 Manuale utente
BIXOLON
BIXOLON SRP-370 - Two-color Direct Thermal Printer Manuale utente
BIXOLON
BIXOLON SRP-770II Manuale utente
BIXOLON
BIXOLON STP-103III Manuale utente
