BIXOLON STP-103 Istruzioni per l'installazione

Command Manual

STP-103

Thermal Printer

Rev. 1.00

POWERERROR

FEEDONLINE

http://www.samsungminiprinters.com

Rev. 1.00 - 2 -

STP-103

1. Control Commands List

Command Name

HT Horizontal tab

LF Print and line feed

CR Print and carriage return

DLE EOT Real-tine status transmission

DLE ENQ Real-time request to printer

ESC SP Set right-side character spacing

ESC ! Select print mode(s)

ESC $ Set absolute print position

ESC % Select/cancel user-defined character set

ESC & Define user-defined characters

ESC * Select bit-image mode

ESC - Turn underline mode on/off

ESC 2 Select 1/6-inch line spacing

ESC 3 Set line spacing

ESC = Select peripheral device

ESC ? Cancel user-defined characters

ESC @ Initialize printer

ESC D Set horizontal tab positions

ESC E Turn emphasized mode on/off

ESC J Print and feed paper

ESC R Select an international character set

ESC V Turn 90 clockwise rotation mode on/off

ESC ＼Set relative print position

ESC a Select justification

Esc c 5 Enable/disable panel FEED buttons

Esc d Print and feed paper n lines

Esc t Select character code table

Esc { Turn upside-down printing mode on/off

FS p Print non-volatile bit image

FS q Define non-volatile bit image

GS ! Select character size

GS * Define downloaded bit image

GS / Print downloaded bit image

GS : Start/end macro definition

GS B Turn white/black reverse printing mode on/off

GS H Select printing position of HRI characters

GS I Transmit print ID

GS L Set let margin

GS P Set vertical and horizontal motion unite

GS W Set printing area width

GS ^ Execute macro

GS a Enable/disable Automatic Status Back

GS b Turn smoothing mode on/off

GS f Select font for HRI characters

GS h Set bar code height

GS k Print bar code

GS v Print raster bit image

GS w Set bar code width

Rev. 1.00 - 3 -

STP-103

2. Control Commands Details

2-1 Command Notation

[Name]

[Format]

[Range]

[Description]

[Notes]

[Default]

[Reference]

[Example]

The name of the command.

The code sequence.

ASCII indicates the ASCII equivalents.

Hex indicates hexadecimal equivalents.

Decimal indicates the decimal equivalent.

[ ]k indicates the contents of the [ ] should be repeated k times.

Gives the allowable ranges for the parameters.

Describes the function of the command.

Provides important information on setting and using the printer

command, it necessary.

Gives the default values, if any, for the command parameters.

Lists related commands.

Provides examples using the command.

The numbers followed by H are hexadecimal

The numbers followed by B are binary.

The numbers denoted by ( ) are decimal.

2-2 Explanation of Terms

LSB Least Significant Bit

2-3 Control Commands Details

[Name] Horizontal tab

[Format] ASCII HT

Hex 09

Decimal 9

[Description] Moves the print position to the next horizontal tab position.

[Name] Print and line feed

[Format] ASCII LF

Hex 0A

Decimal 10

[Description] Prints the data in the print buffer and feeds one line based on the

current line spacing.

Rev. 1.00 - 4 -

STP-103

[Name] Print and carriage return.

[Format] ASCII HT

Hex 0D

Decimal 13

[Description] When automatic line feed is enabled, this command functions the

same as LF; when automatic line feed is disabled, this command is ignored.

DLE EOT n

[Name] Real-time status transmission.

[Format] ASCII DLE EOT n

HEX 10 04 n

Decimal 16 4 n

[Range] 1 ≤n ≤4

[Description] Transmits the selected printer status specified by n in real time,

according to the following parameters:

n=1 : Transmit printer status.

n=2 : Transmit off-line status.

n=3 : Transmit error status.

n=4 : transmit paper roll sensor status.

n=1 : printers status.

Bit Off/On Hex Decimal Function

0 Off 00 0 Not used. Fixed to Off

1 On 02 2 Not used. Fixed to On

2 Off 00 0 Not used.

Off 00 0 On-line3

On 08 8 Off-line

4 On 10 16 Not used. Fixed to On

5-6 - - - Undefined

7 Off 00 0 Not used. Fixed to Off

n=2 : Off-line status

Bit Off/On Hex Decimal Function

0 Off 00 0 Not used. Fixed to off.

1 On 02 2 Not used. Fixed to on.

Off 00 0 Cover is closed.2

On 04 4 Cover is open.

Off 00 0 Paper is not being fed by using the PAPER FEED

button.

On 08 8 Paper is being fed by the PAPER FEED button.

4 On 10 16 Not used. Fixed to on.

5 Off 00 0 Not used. Fixed to off.

6 Off 00 0 Not used. Fixed to off.

7 Off 00 0 Not used. Fixed to off.

Rev. 1.00 - 5 -

STP-103

n=3 : Error status

Bit Off/On Hex decimal Function

0 Off 00 0 Not used. Fixed to Off.

1 On 02 2 Not used. Fixed to On.

2 - - - Undefined.

3 Off 00 0 Not used. Fixed to Off.

4 On 10 16 Not used. Fixed to On.

5 Off 00 0 Not used. Fixed to Off.

6 Off 00 0 Not used. Fixed to Off.

7 Off 00 0 Not used. Fixed to Off.

n=4 : Continuous paper sensor status

Bit Off/On Hex Decimal Function

0 Off 00 0 Not used. Fixed to Off.

1 On 02 2 Not used. Fixed to On.

Off,Off 00 0 Paper roll near-end sensor is Off.2,3

On,On 0C 12 Paper roll near-end sensor is On.

4 On 10 16 Not used. Fixed to On.

Off 00 0 Paper roll sensor. Paper present.5,6

On 60 96 Paper roll end detected by paper roll sensor

7 Off 00 0 Not used. Fixed to Off.

DLE ENQ n

[Name] Real time request to printer

[Format] ASCII DLE ENQ n

HEX 10 05 n

DECIMAL 16 5 n

[Range] 1≤n ≤2

[Description] Respond to a request from the host computer. n specifies the requests as

follows.

n Request

1 Recover from an error and restart printing from the line where the error occurred

2 Recover from an error after clearing the receive and print buffers

ESC SP n

[Name] Set right-side character spacing

[Format] ASCII ESC SP n

Hex 1B 20 n

Decimal 27 32 n

[Range] 0 ≤n ≤255

[Description] Sets the character spacing for the right side of the character to

[n × horizontal or vertical motion units].

Rev. 1.00 - 6 -

STP-103

ESC ! n

[Name] Select print mode(s)

[Format] ASCII ESC ! n

Hex 1B 21 n

Decimal 27 33 n

[Range] 0 ≤n ≤255

[Description] Selects print mode(s) using n as following table in next page.

Bit Off/On Hex Decimal Function

Off 00 0 24 character (font A : 12 ×24)0

On 01 1 42 character (font B : 9 ×24)

Off 00 0 Undefined1

On 02 2 32 character (font A : 12 ×24)

2 - - - Undefined

Off 00 0 Emphasized mode not selected.3

On 08 8 Emphasized mode selected.

Off 00 0 Double-height mode not selected.4

On 10 16 Double-height mode selected.

Off 00 0 Double-width mode not selected.5

On 20 32 Double-width mode selected.

6 - - - Undefined.

Off 00 0 Underline mode not selected.7

On 80 128 Underline mode selected.

ESC $ nL nH

[Name] Set absolute print position

[Format] ASCII ESC $ nL nH

Hex 1B 24 nL nH

Decimal 27 36 nL nH

[Range] 0 ≤nL ≤255

0≤nH ≤255

[Description] Sets the distance from the beginning of the line to the position at

which subsequent characters are to be printed.

The distance from the beginning of the line to the print position

is [(nL + nH ×256)×(vertical or horizontal motion unit)] inches.

ESC % n

[Name] Select/cancel user-defined character set

ASCII ESC % n

Hex 1B 25 n

Decimal 27 37 n

[Range] 0 ≤n ≤255

[Description] Selects or cancels the user-defined character set.

When the Least Significant Bit(LSB) of n is 0, the user-defined

Character set is canceled.

When the LSB of n is 1, the user-defined character set is selected.

Rev. 1.00 - 7 -

STP-103

ESC & y c1 c2 [x1 d1… d(y X x1)]…[xk d1…d(y X xk)]

[Name] Define user-defined characters

ASCII ESC & y c1 c2[x1d1…d(yXx1)]…[xkd1…d(yXxk)]

Hex 1B 26 y c1 c2[x1d1…d(yXx1)]…[xkd1…d(yXxk)]

Decimal 27 38 y c1 c2[x1d1…d(yXx1)]…[xkd1…d(yXxk)]

[Range] y = 3

32≤c1 ≤c2 ≤126

0≤x ≤12 (Font A (12×24))

0≤x ≤9 (Font B ( 9×24))

0≤d1… d(y × xk) ≤255

[Description] Defines user-defined characters. y specifies the number of bytes in the

vertical direction. C1 specifies the beginning character code for the

definition, and c2 Specifies the final code. x specifies the beginning

character code for the definition, and c2 specifies the final code.

ESC * m nL nH d1... dk

[Name] Select bit-image mode

[Format] ASCII ESC * m nL nH d1... dk

Hex 1B 2A m nL nHd1...dk

Decimal 27 42 m nL nH d1... dk

[Range] m = 0, 1, 32, 33

0≤nL ≤255 , 0 ≤nH ≤3 , 0 ≤d ≤255

[Description] Selects a bit-image mode using m for the number of dots specified

by nL and nH, as follows:

Vertical Direction Horizontal Direction(*1)

m Mode Number

of Dots

Dots

Density

Dots

Density Number of Data (k)

0 8-dot single-density 8 67 DPI 100 DPI nL + nH ×256

1 8-dot double-density 8 67 DPI 200 DPI nL + nH ×256

32 24-dot single-density 24 200 DPI 100 DPI (nL + nH ×256) ×3

33 24-dot double-density 24 200 DPI 200 DPI (nL + nH ×256) ×3

ESC - n

[Name] Turn underline mode on/off

ASCII ESC - n

Hex 1B 2D n

Decimal 27 45 n

[Range] 0 ≤n ≤2, 48 ≤n ≤50

[Description] Turns underline mode on or off, based on the following values of n:

n Function

0,48 Turns off underline mode

1,49 Turns off underline mode(1-dot thick)

2,50 Turns off underline mode(2-dot thick)

Rev. 1.00 - 8 -

STP-103

ESC 2

[Name] Select 1/6-inch line spacing

[Format] ASCII ESC 2

Hex 1B 32

Decimal 27 50

[Description] Selects 1/6-inch line spacing.

ESC 3 n

[Name] Set line spacing

[Format] ASCII ESC 3 n

Hex 1B 33 n

Decimal 27 51 n

[Range] Sets the line spacing to [n X (vertical or horizontal motion unit)]

inches.

[Description] 0 ≤n ≤255

ESC = n

[Name] Select peripheral device

[Format] ASCII ESC = n

Hex 1B 3D n

Decimal 27 61 n

[Range] 0 ≤n ≤255

[Description] Selects the device to which the host computer sends data, using n

asfollows:

Bit Off/On Hex Decimal Function

Off 00 0 Printer disabled.

0 On 01 1 Printer enabled.

1 - - - Undefined.

2 - - - Undefined.

3 - - - Undefined.

4 - - - Undefined.

5 - - - Undefined.

6 - - - Undefined.

7 - - - Undefined.

ESC ? n

[Name] Cancel user-defined characters

[Format] ASCII ESC ? n

Hex 1B 3F n

Decimal 27 63 n

[Range] 32 ≤n ≤126

[Description] Cancels user-defined characters.

Rev. 1.00 - 9 -

STP-103

ESC @

[Name] Initialize printer

[Format] ASCII ESC @

Hex 1B 40

Decimal 27 64

[Description] Clears the data in the print buffer and resets the printer mode to

the mode that was in effect when the power was turned on.

ESC D n1...nk NUL

[name] Set horizontal tab positions

[Format] ASCII ESC D n1...nk NUL

Hex 1B 44 n1...nk 00

Decimal 27 68 n1...nk 0

[Range] 1 ≤n ≤255

0≤k ≤32

[Description] Sets horizontal tab positions.

●n specifies the column number for setting a horizontal tab position from

the beginning of the line.

●k indicates the total number of horizontal tab positions to be set.

ESC E n

[Name] Turn emphasized mode on/off

[Format] ASCII ESC E n

Hex 1B 45 n

Decimal 27 69 n

[Range] 0 ≤n ≤255

[Description] Turns emphasized mode on or off.

●When the LSB of n is 0, emphasized mode is turned off.

●When the LSB of n is 1, emphasized mode is turned on.

ESC J n

[Name] Print and feed paper

[Format] ASCII ESC J n

Hex 1B 4A n

Decimal 27 74 n

[Range] 0 ≤n ≤255

[Description] Prints the data in the print buffer and feeds the paper

[n X (vertical or horizontal motion unit)] inches.

Rev. 1.00 - 10 -

STP-103

ESC R n

[Name] Select an international character set

[Format] ASCII ESC R n

Hex 1B 52 n

Decimal 27 82 n

[Range] 0 ≤n ≤10

[Description] Selects an international character set n from the following table:

n Character set

0 U.S.A.

1 France

2 Germany

3 U.K

4 Denmark Ⅰ

5 Sweden

6 Italy

7 Spain

8 Japan

9 Norway

10 Denmark Ⅱ

Altri manuali per STP-103

Altri manuali BIXOLON Stampante

BIXOLON

BIXOLON SPP-R220 Manuale utente

BIXOLON

BIXOLON SRP-Q300 Manuale utente

BIXOLON

BIXOLON SRP-350plus Manuale di installazione e funzionamento

BIXOLON

BIXOLON SPP-R200 Manuale utente

BIXOLON

BIXOLON SPP-R310 Manuale utente

BIXOLON

BIXOLON SRP-S3000 Manuale di installazione e funzionamento

BIXOLON

BIXOLON SRP-350 PlusA Manuale utente

BIXOLON

BIXOLON SPP-R300 Guida per l'amministratore

BIXOLON

BIXOLON SRP-S200 Manuale utente

BIXOLON

BIXOLON SRP-350 PlusA Manuale utente

BIXOLON

BIXOLON SRP-F310 Manuale utente

BIXOLON

BIXOLON SRP-275II Manuale utente

BIXOLON

BIXOLON SRP-370 - Two-color Direct Thermal Printer Manuale utente

BIXOLON

BIXOLON SPP-C200 Manuale utente

BIXOLON

BIXOLON SRP-352plusIII Nota di rilascio

BIXOLON

BIXOLON SRP-330II Manuale utente

BIXOLON

BIXOLON SPP-L410K5L Manuale utente

BIXOLON

BIXOLON SRP-350plusIII SRP-352plusIII Manuale utente

BIXOLON

BIXOLON SRP-350IIOBEi Manuale utente

BIXOLON

BIXOLON SRP-S3000 Manuale utente

BIXOLON

BIXOLON SPP-R200II Manuale utente

BIXOLON

BIXOLON Srp-275III Manuale utente

BIXOLON

BIXOLON SRP-F310 Istruzioni per l'installazione

BIXOLON

BIXOLON SRP-350 PlusA Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente