BIXOLON STP-103III Manuale utente
Users’ Manual
STP-103III
Thermal Printer
Rev. 1.01
http://www.bixolon.com
STP-103III
Rev. 1.01
- 2 -
■Safety Precautions
The instructions shown below must be followed to prevent possible danger or damage by
using the product incorrectly.
Warning
Serious injury or death may result if the instructions associated with this sign
are not followed.
Do not apply excessive force to bend the cable and
do not place heavy objects on the cable.
• It could cause a fire.
Do not plug or unplug the power plug with wet
hands.
•It could cause an electric shock.
Keep the vinyl pack out of reach of children.
• It is dangerous to children.
Do not pull the cable to unplug the power plug.
• Power cord may get damaged, which could cause faults or
fire.
Use only the adaptor supplied with the product.
•Using other adapters is dangerous.
Do not plug in multiple products into one outlet at
the same time.
• It could result in overheating or fire.
• If dirt or moisture enter the power plug, clean it thoroughly
before using it.
• If the power receptacle is loose, do not connect in the power
plug.
• Use only standard multi-outlets.
PROHIBIT
PROHIBIT
PROHIBIT
PROHIBIT
ONLY SUPPLIED ADAPTER
PROHIBIT
PROHIBIT
STP-103III
Rev. 1.01
- 3 -
Caution
Minor injury or product damage may result if the instructions associated with
this sign are not followed.
Keep the desiccant out of the reach of children
.
•It is dangerous if children eat it.
Do not use the product if it is malfunctioning. It
could cause fire or electric shock.
•Turn off the power to printer main body immediately, unplug
the power cord, and contact the sale representative.
Take care not to let water or dirt get inside the main
body of the printer.
• When water or dirt penetrated the main body, turn off the
power to the printer main body first, unplug the power cord,
and contact the sales representative.
Use only approved parts, and avoid unauthorized
disassembly, repair, or modification.
•Contact the sales representative as unauthorized service
may damage the product.
• Do not touch the blade of the auto cutter as it is sharp.
Install the product in a stable place.
• Product may be damaged or it could cause an injury if it falls
over.
If smoke, strange smells or noises come from the
product, turn off the power immediately and follow
the instructions below.
• If the product is not working normally, turn off the power to
the printer main body immediately and unplug the power
cord from the outlet.
• After checking that there is no smoke, request repair from
where you purchased the product.
PROHIBIT
PROHIBIT
ED
PROHIBIT
ED
PROHIBIT
ED
DISASSEMBLING
PROHIBITED
Display
PRINTER
DEALER
Display
Display
Display
TO UNPLUG
STP-103III
Rev. 1.01
- 4 -
(C) Copyright BIXOLON Co., Ltd.
All rights reserved
This users’manual and the product are protected by copyright laws.
The users’manual or the product shall not be copied, replicated, translated, or transformed
into a form that is readable by electronic media or machines either partially or fully without
the prior written consent of BIXOLON. This users’manual may contain errors in printing or
technical errors, and they are subject to change without prior notice.
STP-103III and the logo of BIXOLON are registered trademarks of BIXOLON.
This device is registered as electromagnetic wave compliant equipment suitable for
business purposes, and users or sellers need to take precautions. If the product is
purchased or sold improperly, exchange the product for one for home use.
We make continuous improvements in order to enhance the functions and quality of the
products.
The specifications of the products and the contents of the manual are subject to change
without prior notice for this reason.
■WEEE (Waste Electrical and Electric Equipment)
The marks on this product and related descriptions mean that the product shall
not be disposed of together with other home use wastes when the product
reaches the end of its life. In order to prevent damage to the environment and
people caused by mixing this product with other wastes, separate it from other
wastes. Your cooperation for saving resources following the recycling policy
would be appreciated. Home users can contact the sales representative where the product
was purchased or local government offices to check the disposal method and places.
Business users can contact the supplier or read the conditions in the purchase contracts.
The product must not be mixed with other commercial-use wastes.
■Rating Label Symbol Information
DC (Direct current)
■Label Material: PET
STP-103III
Rev. 1.01
- 5 -
■Product Overview
* Parts Name
(1) Top cover
(2) Front face of case
(3) Bottom of case
(4) Control panel
(5) Power switch
(6) Roller
(7) Communication connector
(8) USB
(9) DK terminals
(10) Power terminals
(11) Paper
(12) Detection switch
The STP-103III roll printer is designed to be used with other electric devices such as
banking devices and peripheral devices, ECR, and POS.
Main features are as follows.
1. Fast printing speed
2. Low noise thermal printing
3. RS-232 serial interface and parallel interface
4. Data can be received through the data buffer while printing.
5. Printing density can be selected using DIP switches.
Read the instructions in this manual carefully before using the STP-103III.
※Caution
Electric wall outlet must be conveniently located near to the device and easily accessible.
Rear view
Rear view
STP-103III
Rev. 1.01
- 6 -
■Table of Contents
1. Installation and Basic Instructions of the Printer .....................................................7
1-1 Unpacking.................................................................................................................7
1-2 Installation Location..................................................................................................7
1-3 Operation Control Panel...........................................................................................8
2. Connecting Cable ........................................................................................................9
2-1 Connecting AC Adapter............................................................................................9
2-2 Connecting Interface Cable....................................................................................10
2-2-1 Serial Interface of STP-103III .....................................................................11
2-2-2 Parallel Interface of STP-103III...................................................................11
2-2-3 USB Interface of STP-103III.......................................................................12
3. DIP Switches Setting.................................................................................................13
4. Installing Paper Roll ..................................................................................................15
5. Self Test......................................................................................................................16
5-1 Self Test Printing ....................................................................................................16
5-2 Finishing Self Test..................................................................................................16
6. Hexadecimal Dumping ..............................................................................................17
7. Specifications ............................................................................................................18
STP-103III
Rev. 1.01
- 7 -
1. Installation and Basic Instructions of the Printer
1-1 Unpacking
Check the following contents and contact the sales representative where you purchased
the product if any item is missing or incorrect.
1-2 Installation Location
Avoid installing near heat or in direct sunlight.
Avoid humid places.
Store and use the product on a flat area and avoid locations where it may be banged.
Secure enough space around the printer so that it can be used easily.
Roll paper
Cable
Installation Manual CD
Adapter
Power cord
Printer
STP-103III
Rev. 1.01
- 8 -
1-3 Operation Control Panel
There are two buttons and two lights on the control panel.
Buttons
Buttons are for paper feed and online functions.
ON LINE
Press ON LINE button to receive data from the computer.
FEED
Press the FEED button to print one line.
Press and hold the feed button to print continuously.
FEED button can be used when ON LINE button is off.
Lights
Lights indicate the status of the printer.
POWER (green)
This light is on when the printer is turned on.
ERROR (red)
This light blinks when there is no paper.
This light also blinks when near-end-sensor is activated.
STP-103III
Rev. 1.01
- 9 -
2. Connecting Cable
2-1 Connecting AC Adapter
Use the optional AC adapter for the printer.
※Warning
Using an improper power supply device could cause fire or electric fault.
※Caution
Check that the power supply device is connected to the power terminal when turning the
printer on or off. Otherwise, it may damage the printer or the power supply device.
2-1-1 Check whether the power switch of the printer is off and whether the power supply
device is disconnected from the power terminal.
2-1-2 Check that the supply voltage is correct for the device.
2-1-3 Connect the DC cable connector of the power supply device to the power connector
of the printer as shown below.
2-1-4 Connect the power cord of the AD adapter to the power terminal of the printer.
※Caution
When you remove the DC cable connector, hold the connector tightly in the direction of the
arrow and pull the cable horizontally. Make sure that the power cord is not connected on
the power supply side.
STP-103III
Rev. 1.01
- 10 -
2-2 Connecting Interface Cable
In order to connect the printer to the computer, you need a proper serial, parallel, or USB
interface cable.
- Check that both computer and printer are turned off,
and connect the cable connector to the interface connector of the printer.
- Fasten the screws on both sides of the cable connector.
- Connect the other end of the cable to the computer.
25 Pin Female Type
25-Pin Female Type
Altri manuali per STP-103III
3
Indice
Altri manuali BIXOLON Stampante
BIXOLON
BIXOLON SRP-350III Manuale utente
BIXOLON
BIXOLON SRP-S320 Manuale utente
BIXOLON
BIXOLON SRP332III Istruzioni per l'installazione
BIXOLON
BIXOLON SPP-R300 Manuale utente
BIXOLON
BIXOLON SRP-275 Manuale utente
BIXOLON
BIXOLON SPP-R200 Manuale utente
BIXOLON
BIXOLON SRP-S3000 Manuale di istruzioni
BIXOLON
BIXOLON SRP-330 Manuale utente
BIXOLON
BIXOLON SRP-500 Manuale utente
BIXOLON
BIXOLON SPP-R200III Manuale utente
BIXOLON
BIXOLON SRP-500 Istruzioni per l'installazione
BIXOLON
BIXOLON XQ-840II Series Manuale utente
BIXOLON
BIXOLON SRP-150 Manuale utente
BIXOLON
BIXOLON SRP-B300 Manuale utente
BIXOLON
BIXOLON SRP-F310 Istruzioni per l'installazione
BIXOLON
BIXOLON SRP-350V Istruzioni per l'installazione
BIXOLON
BIXOLON SPP-L3000 Manuale utente
BIXOLON
BIXOLON STP-103 Manuale di installazione e funzionamento
BIXOLON
BIXOLON SRP-350plusV Manuale di istruzioni
BIXOLON
BIXOLON SRP-350 PlusA Manuale utente
