Black Box ACS335A Manuale utente

THE ACS335A KVM-EXTENDER FAMILY

Welcome to the ACS335A KVM-Extender

Family!

Thank you for purchasing a ACS335A KVM-Extender model. We appreciate your business,

and we think you’ll appreciate the many ways that your enhanced keyboard/video/ mouse

system will save you money, time, and effort.

That’s because our ACS335A KVM-Extender not only allows you to remotely locate a

console (Monitor, Keyboard, Mouse + optional serial/audio devices) over great distances

without any loss in signal quality (up to 1000m/3250ft) but also to do this in an EMI

hazardous environment.

Wherever you have great distances: airports, roller plants, distributed data centres; or in a

range of applications where you have large electromagnetic generators or loads, magnetic

resonance tomographs, induction furnaces, current generators; the ACS335A KVM-Extender

is a solution for remotely locating your console. Two different models cover a range of

applications: a KVM extender for a standard remote console – Monitor, Keyboard and

Mouse; and a second unit with KVM extension and additional serial and bi-directional audio

support. This device is also suitable for computers equipped with a serial mouse or touch

screen.

This manual will tell you all about your new ACS335A KVM-Extender, including how to

install, operate, and troubleshoot it. For an introduction to the Extender,

see Chapter 2. The Extender product codes covered in this manual are:

ACS335A: KVM-Extender for VGA, PS2-Keyboard/Mouse

ACS335A-AS: KVM-Extender for VGA, PS2-Keyboard/Mouse + Serial/Audio

ACS335A –5 STRAND KVM-EXTENDER

Copyrights and Trademarks

the prior written consent of the manufacturer.

Information in this document is subject to change without notice and the manufacturer shall

not be liable for any direct, indirect, special, incidental or consequential damages in

connection with the use of this material.

All trademark and trade names mentioned in this document are acknowledged to be the

property of their respective owners.

Disclaimer

While every precaution has been taken in the preparation of this manual, the manufacturer

assumes no responsibility for errors or omissions. Neither does the manufacturer assume any

liability for damages resulting from the use of the information contained herein. The

manufacturer reserves the right to change the specifications, functions, or circuitry of the

product without notice.

The manufacturer cannot accept liability for damage due to misuse of the product or due to

any other circumstances outside the manufacturer’s control (whether environmental or

installation related). The manufacturer shall not be responsible for any loss, damage, or injury

arising directly, indirectly, or consequently from the use of this product.

Cautions and Notes

The following symbols are used in this guide:

CAUTION. This indicates an important operating instruction

that should be followed to avoid any potential damage to

hardware or property, loss of data, or personal in ury.

NOTE. This indicates important information to help you make the best use

of this product.

FCC/CDC STATEMENTS

FEDERAL COMMUNICATIONS COMMISSION

AND CANADIAN DEPARTMENT OF COMMUNICATIONS

RADIO-FREQUENCY INTERFERENCE STATEMENTS

This equipment generates, uses, and can radiate radio-frequency energy, and if not installed

and used properly, that is, in strict accordance with the manufacturer’s instructions, may

cause interference to radio communication. It has been tested and found to comply with the

limits for a Class A computing device in accordance with the specifications in Subpart B of

Part 15 of FCC rules, which are designed to provide reasonable protection against such

interference when the equipment is operated in a commercial environment. Operation of this

equipment in a residential area is likely to cause interference, in which case the user at his

own expense will be required to take whatever measures may be necessary to correct the

interference.

Changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

Shielded PC-equipment cables must be used with this equipment to maintain compliance with

radio frequency energy emission regulations and ensure a suitably high level of immunity to

electromagnetic disturbances.

This digital apparatus does not exceed the Class A limits for radio noise emission from digital

apparatus set out in the Radio Interference Regulation of the Canadian Department of

Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites

applicables aux appareils numériques de la classe A prescrites dans le Règlement sur le

brouillage radioélectrique publié par le Ministerié des Communications du Canada.

EMPTY PAGE

CE - DECLARATION OF CONFORMITY

EUROPEAN UNION DECLARATION OF CONFORMITY

This is to certify that, when installed and used according to the instructions in this

manual, together with the specified cables and the maximum cable length <3m, the

Units:

ACS335A

ACS335A-AS

are shielded against the generation of radio interferences in accordance with the

application of Council Directive 89/336/EEC as well as these standards:

EN 55022: 1999 Class A

EN 55024: 1999

IEC 61000-4-2: 2001

IEC 61000-4-3: 2001

IEC 61000-4-4: 2001

EN 61000-3-2 2001

EN 61000-3-3 2002

The device was tested in a typical configuration with PC.

Oberteuringen, Wednesday, October 11

, 2006

The management

This equipment has been found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense.

SAFETY PRECAUTIONS AND INSTALLATION GUIDELINES

Safety Precautions and Installation Guidelines

To ensure reliable and safe long-term operation, please note the following installation

guidelines:

•Only use in dry, indoor environments.

•The Remote unit, Local unit and any power supplies can get warm. Do not locate them

in an enclosed space without any airflow.

•Do not place a power supply directly on top of a unit.

•Do not obstruct a unit’s ventilation holes.

To safeguard against personal in ury and avoid possible

damage to equipment or property, please observe the

following:

•Only use power supplies originally supplied with the

product or manufacturer-approved replacements. Do not

attempt to dismantle or repair any power supply. Do not

use a power supply if it appears to be defective or has a

damaged case.

•Connect all power supplies to grounded outlets. In each

case, ensure that the ground connection is maintained

from the outlet socket through to the power supply’s AC

power input.

•Do not attempt to modify or repair this product

QUICK SETUP

Contents

1. Quick Setup 8

2. Overview 9

2.1 Introduction 9

2.2 Glossary 9

2.3 Features 11

2.4 Product Range 12

2.5 Compatibility 13

2.6 How to Use This Guide 14

3. Installation 15

3.1 Package Contents 15

3.2 Interconnection Cable Requirements 16

3.3 System Setup 17

3.4 Diagnostic and Adjustments 21

4. Adjustments 25

4.1 Jumper Location in the Local Unit 26

4.2 Jumper Location in the Remote Unit 27

4.3 Customization 27

5. Monitor Setup 30

5.1 TFT Monitors 32

5.2 Hints for Pixel Clock and Pixel Phase 33

5.3 Manual Adjustment of Video Signals 34

6. Troubleshooting 35

Appendix A: Example Applications 36

Appendix B: 19” Rack Mount Options 38

Appendix C: Audio/Serial Upgrade 40

Appendix D: Technical Support 42

Appendix E: Specifications 43

Appendix I: Connectors 45

ACS335A –5 STRAND KVM-EXTENDER

1. Quick Setup

This section briefly describes how to install your KVM extender system and optimise the

video signals. Unless you are an experienced user, we recommend that you follow the full

procedures described in the rest of this manual.

Install System

1. Connect Remote unit to KVM.

2. Connect Local unit to CPU or switch.

3. Connect Local and Remote units with fibre interconnection cable.

4. Power up the system.

YES

Does the 7-

segment display show

’0’?

YES

Solve the problem as described in

the Troubleshooting section

(page 35).

Wait until the dot lapses

YES

The fibres for data transmission

(1 + 2) are swapped – switch the

fibres at one device (see page 20).

Does the 7-

segment display show

’C’?

Is the dot on the

7 segment display

illuminated?

Done

OVERVIEW

2. Overview

2.1 Introduction

With a fibre KVM Extender you can dramatically increase the maximum distance between a

CPU and its Console – the keyboard/mouse and monitor (+ serial/audio devices). In addition,

they are essential for installations in hazardous EMI environments. Normal

keyboard/mouse/monitor extender cables (and Extenders using regular cables) have lower

extension capabilities and EMI interference may further reduce the maximum distance and

reliability. The ACS335A fibre optical KVM Extender System has none of these limitations.

Locate your CPU in a secure cabinet or data centre and access it remotely from a distance of

up to 1000m.

A basic KVM extension system comprises a Local unit (transmitter) and a Remote unit

(receiver). The Local unit connects directly to the computer (or a KVM switch system) using

the supplied cable(s). The user console (keyboard, mouse and monitor) attaches to the

Remote unit. The Remote and Local units communicate video and data information along the

interconnecting cable. Local units offer dual access, allowing the connection of a second user

console close to the computer. With the optional upgrade kit, you can also use the units to

communicate stereo audio and serial port signals.

2.2 Glossary

The following terms are used in this guide:

Multimode Any multimode 5+-fibre cable 50/125µ or 62.5/125µ

PSU The desktop power supply connected to the Local/Remote unit.

KVM Keyboard, Video (monitor) and Mouse.

Console A keyboard, monitor, and mouse, plus optional serial/audio devices.

Dual Access A system allowing connection of Local and Remote user consoles.

RGB Video signal, consisting of R (red) G (green) and B (blue) signals. The

signals have a level of 0.7Vpp. The Green-Signal also carries the

(composite) synchronisation signals.

RGBS Video signal, consisting of R (red) G (green) and B (blue) signals and

the additional (composite) SYNC signal. All signals have 0.7Vpp.

VGA

(also called

RGBHV)

Video signal, consisting of R (red) G (green) and B (blue) signals and

the additional horizontal/vertical synchronisation signals. The colour

signals have a level of 0.7Vpp, the synchronisation TTL (5Volts).

ACS335A –5 STRAND KVM-EXTENDER

ACS335A – KVM Extender System (Example)

CPU with VGA

Graphic Card

ACS335A KVM-Extender System

Optional Serial

device + Audio

Remote Console

Local Access

Altri manuali per ACS335A

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Black Box Estensione

Black Box

Black Box AC1000A-R3 Manuale utente

Black Box

Black Box LB323A Manuale utente

Black Box

Black Box ACS253A-U-MM Manuale utente

Black Box

Black Box KVX Series Istruzioni per l’uso

Black Box

Black Box ServSwitch ACU1001A Manuale utente

Black Box

Black Box LBPS01A-KIT Manuale utente

Black Box

Black Box ServSwitch Wizard ACU5050A-R2 Manuale utente

Black Box

Black Box ServSwitch Duo KV6EXTB-R2 Manuale utente

Black Box

Black Box ServSwitch ACU075A-PS2 Manuale utente

Black Box

Black Box LBPS310A-KIT Manuale utente

Black Box

Black Box ServSwitch ACX310F Manuale utente

Black Box

Black Box ServSwitch ACU5010A Manuale utente

Black Box

Black Box EMERALD PE SH Manuale utente

Black Box

Black Box ServSwitch ACU3201A Manuale utente

Black Box

Black Box ServSwitch ACUR004A Manuale utente

Black Box

Black Box LB512A-KIT Manuale utente

Black Box

Black Box AVS-HDB-4TX Manuale utente

Black Box

Black Box USB Director RS-232 Manuale utente

Black Box

Black Box IC400A-R2 Manuale utente

Black Box

Black Box ACU1600A Manuale utente

Black Box

Black Box LRXI Manuale utente

Black Box

Black Box EMD4000R Manuale utente

Black Box

Black Box IC408A Manuale utente

Black Box

Black Box Wizard ACU50 A Series Manuale utente

Manuali Estensione popolari di altre marche

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente