Black Box VOE241 Manuale utente

CUSTOMER

SUPPORT

INFORMATION

Order toll-free in the U.S. 24 hours, 7A.M. Monday to midnight Friday: 877-877-BBOX

FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: [email protected]

Digital VoIP Router

Important

This is a Class A device and is intended for use in a light industrial environment. It is not intended nor

approved for use in an industrial or residential environment.

JUNE 2007

VOE241

DIGITAL VOIP ROUTER

TRADEMARKS USED IN THIS MANUAL

All applied-for and registered trademarks are the property of their respective owners.

•

The VOE241 contains no user serviceable parts. The

equipment shall be returned to Black Box for repairs,

or repaired by qualiﬁed service personnel.

•

The external power adaptor shall be a listed limited

power source that incorporates a disconnect device

and shall be positioned within easy reach of the

operator. The mains outlet shall be within 10 feet (3

meters) of the device, shall be easily accessible, and

protected by a circuit breaker.

•

Ensure that the power cable used meets all applica-

ble standards for the country in which it is to be

installed, and that it is connected to a wall outlet

which has earth ground.

•

Hazardous network voltages are present in WAN

ports regardless of whether power to the VOE241 is

ON or OFF. To avoid electric shock, use caution when

near WAN ports. when detaching the cables, detach

the end away from the VOE241 ﬁrst.

•

Do not work on the system or connect or disconnect

cables during periods of lightning activity.

•

Do not work on the system unless telephone network

cables are disconnected in order to prevent contact

with telephone line voltages.

In accordance with the requirements of council directive 2002/96/EC on Waste of

Electrical and Electronic Equipment (WEEE), ensure that at end-of-life you separate

this product from other waste and scrap and deliver to the WEEE collection system in

your country for recycling.

WARNING

DIGITAL VOIP ROUTER

1. Connect the VOE241 to your PC

First, the VOE241 must be connected to the mains power supply with the power

cable. Wait until the

Power

LED stops blinking and stays lit constantly. Now the

VOE241 is ready.

The VOE241 is equipped withAuto-MDX Ethernet ports, so you can use

straight-through cables for host or hub/switch connections (see Figure 1).

Figure 1.

Connecting the VOE241 to your laptop PC

The VOE241 comes with a built-in DHCP server to simplify conﬁguration.

Therefore, to automatically conﬁgure the PC for IP connectivity to theVOE241,

the laptop PC must be conﬁgured for DHCP. TheVOE241 will provide the PC

with an IP address.You can check the connection to the VOE241 by executing

the ping command from the PC command window as follows:

ping 192.168.1.1

DIGITAL VOIP ROUTER

2. Conﬁguring the desired IP address

2.1 Factory-default IP settings

Both Ethernet interfaces are activated upon power-up. The LAN interface ETH

0/1 (LAN) provides a default DHCP server.

The factory default conﬁguration for the Ethernet interface IP addresses and net-

work masks are listed in the table below. Both Ethernet interfaces are activated

upon power-up. LAN interface

ETH 0/1 (LAN)

provides a default DHCP server.

Note

Any of

ETH 0/1 (LAN)

ports 1–4 can be used to conﬁgure the VOE241.

If these addresses match with those of your network, go to section “Connecting

theVOE241 to the network” on page 6. Otherwise, refer to the following sections

to change the addresses and network masks.

Note

The VOE241 does not have an external RS-232 console port. Manage-

ment access takes place via Telnet or a web browser.

2.2 Login

To access the VOE241, start the Telnet application. Type the default IP address

for the router into the address ﬁeld:

192.168.1.1

. Accessing your VOE241 via a

Telnet session displays the login screen. Type the factory default login:

adminis-

trator

and leave the password empty. Press the

Enter

key after the password

prompt.

administrator

password: <Enter>

192.168.1.1>

Item IP Address Network Mask

WAN interface Ethernet 0

(ETH 0/0) 172.16.40.1 255.255.0.0

LAN interface Ethernet 1

(ETH 0/1) 192.168.1.1 255.255.255.0

DHCP address range 192.168.1.10–192.168.1.19 255.255.255.0

DIGITAL VOIP ROUTER

After you have successfully logged in you are in the operator execution mode,

indicated by > as command line prompt. With the commands

enable

and

conﬁg-

ure

you enter the conﬁguration mode.

192.168.1.1>

enable

192.168.1.1#

configure

192.168.1.1(cfg)#

2.3 Changing the WAN IP address

Select the context IP mode to conﬁgure an IP interface.

192.168.1.1(cfg)#

context ip router

192.168.1.1(ctx-ip)[router]#

Now you can set your IP address and network mask for the interface

ETH 0/0

(WAN)

. Within this example a network 172.16.1.0/24 address is assumed. The IP

address in this example is set to

172.16.1.99

(you should set this the IP address

given to you by your network provider).

172.16.1.99(ctx-ip)[router]#

interface eth0

172.16.1.99(if-ip)[eth0]#ipaddress 172.16.1.99 255.255.255.0

2002-10-29T00:09:40 : LOGINFO : Link down on interface eth0.

2002-10-29T00:09:40 : LOGINFO : Link up on interface eth0.

172.16.1.99(if-ip)[eth0]#

Copy this modiﬁed conﬁguration to your new start-up conﬁguration. Upon the

next start-up the system will initialize itself using the modiﬁed conﬁguration.

172.16.1.99(if-ip)[eth0]#

copy running-config startup-config

172.16.1.99(if-ip)[eth0]#

The VOE241 can now be connected to your network.

DIGITAL VOIP ROUTER

3. Connecting the VOE241 to the network

In general, the VOE241 will connect to the network via the

WAN (ETH 0/0)

port.

This enables the VOE241 to offer routing services to the PC hosts on

LAN (ETH

0/1)

ports 1–4. TheVOE241 is equipped with Auto-MDX Ethernet ports, so you

can use straight-through or crossover cables for host or hub/switch connections

(see Figure 2).

Figure 2.

Connecting the VOE241 to the network

You can check the connection with the ping command from the VOE241 to

another host on the network.

172.16.1.99(if-ip)[eth0]#ping <IP Address of the host>

Respectively from the host:

ping 172.16.1.99

Note

To ping outside your local LAN, you will need to conﬁgure the default

gateway.

DIGITAL VOIP ROUTER

4. Loading the conﬁguration (optional)

Black Box provides a collection of conﬁguration templates on the CD-ROM

shipped with your VOE241 device, one of which may be similar enough to your

application that you can use it to speed up conﬁguring the VOE241. Simply

download the conﬁguration note that matches your application to your PC.Adapt

the conﬁguration as described in the conﬁguration note to your network (remem-

ber to modify the IP address) and copy the modiﬁed conﬁguration to a TFTP

server. The VOE241 can now load its conﬁguration from this server.

Note

If your application is unique and not covered by any of Black Box’s con-

ﬁguration templates, you can manually conﬁgure the VOE241 instead of

loading a conﬁguration ﬁle template.

In this example we assume the TFTP server on the host with the IP address

172.16.1.11 and the conﬁguration named

VOE.cfg

in the root directory of the

TFTP server.

172.16.1.99(if-ip)[eth0]#

copy tftp://172.16.1.11/VOE.cfg star-

tup-config

Download...100%

172.16.1.99(if-ip)[eth0]#

After the VOE241 has been rebooted the new startup conﬁguration will be acti-

vated

172.16.1.99(if-ip)[eth0]#

reload

Running configuration has been changed.

Do you want to copy the 'running-config' to the 'startup-con-

fig'?

Press 'yes' to store, 'no' to drop changes :

Press 'yes' to restart, 'no' to cancel :

yes

The system is going down

When you issue the reload command, the VOE241 will ask if you want to copy the

running conﬁguration to the startup conﬁguration. Since you just downloaded a con-

ﬁguration ﬁle to the startup conﬁguration you must answer this question with

Otherwise, the downloaded conﬁguration will be overwritten and lost!

IMPORTANT

DIGITAL VOIP ROUTER

5. Additional Information

Refer to the

VOE241 Getting Started Guide

located on the CD-ROM shipped

with your VOE241 device and available online at

www.blackbox.com/manuals.

For detailed information about:

•

Installing, conﬁguring, operating, and troubleshooting.

•

Warranty, trademark & compliance

The CD-ROM also includes many freeware and shareware tools, including TFTP

servers, and Telnet clients.

DIGITAL VOIP ROUTER

A. Compliance Information

A.1 Compliance

EMC:

•

FCC Part 15, ClassA

•

EN55022, Class A

•

EN55024

Safety:

•

IEC/EN 60950-1

•

AS/NZS 60950-1

PSTN Regulatory Compliance:

•

TBR 3

•

AS/ACIF S031:2001

DIGITAL VOIP ROUTER

A.2 Radio and TV Interference

The VOE241 router generates and uses radio frequency energy, and if not

installed and used properly—that is, in strict accordance with the manufacturer’s

instructions—may cause interference to radio and television reception. The

VOE241 router have been tested and found to comply with the limits for a Class

B computing device in accordance with speciﬁcations in Subpart B of Part 15 of

FCC rules, which are designed to provide reasonable protection from such inter-

ference in a commercial installation. However, there is no guarantee that interfer-

ence will not occur in a particular installation. If the VOE241 router does cause

interference to radio or television reception, which can be determined by discon-

necting the unit, the user is encouraged to try to correct the interference by one or

more of the following measures: moving the computing equipment away from

the receiver, re-orienting the receiving antenna and/or plugging the receiving

equipment into a differentAC outlet (such that the computing equipment and

receiver are on different branches).

A.3 CE Declaration of Conformity

Product Description: VOE241

The products described above in the form as delivered are in conformity with the

provisions of the following European Directive:

R&TTE Directive 1999/5/EC

Guidelines of the European Parliament and the Committee for the Harmonization

of the Legal Regulations of the Member States concerning radio equipment and

telecommunications terminal equipment and the mutual recognition of their con-

formity.

A.4 ISDN Compliance

The device identiﬁed in this document is approved for connection to the public

ISDN telecommunication network over a BRI/So interface.

The safety advice in the documentation accompanying the

products shall be obeyed. The conformity to the above directive

is indicated by the CE sign on the device.

Altri manuali per VOE241

Indice

Altri manuali Black Box Router di rete

Black Box

Black Box Nortel Secure 1001 Manuale utente

Black Box

Black Box LEH808 Series Manuale utente

Black Box

Black Box LB9019A-R2 Manuale utente

Black Box

Black Box WRT-300BGN-R2 Manuale utente

Black Box

Black Box LEH1208A Manuale utente

Black Box

Black Box LR0019A-4U Manuale utente

Black Box

Black Box LR9501A Manuale utente

Black Box

Black Box LW6001A Manuale utente

Black Box

Black Box LGH1006A Manuale utente

Black Box

Black Box L2 Plus Manuale utente

Black Box

Black Box LB9316A Manuale utente

Black Box

Black Box IC640A Manuale utente

Black Box

Black Box LB8415A-US Manuale utente

Black Box

Black Box LR0003A Manuale utente

Black Box

Black Box LRB500A Manuale utente

Black Box

Black Box LB8418A Manuale utente

Black Box

Black Box LR1531A-R2 Manuale utente

Black Box

Black Box WRT4002A Manuale utente

Black Box

Black Box LB308A Manuale utente

Black Box

Black Box LB9215A Manuale utente

Black Box

Black Box LGB624A Manuale utente

Black Box

Black Box LGB1002A-R2 Manuale utente

Black Box

Black Box LGB316A-R2 Manuale utente

Black Box

Black Box LRA001A-R2 Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza