Blackview X1 Manuale utente

User Manual

Smart Watch

Brand: Blackview

Model: X1

FCC ID:2AVWCX1

Shenzhen Xinhuajitong Technology Co., Ltd.

Please read and understand the manual

Product Introduction

1. Slide up or down on the dial interface to switch the dial display.

2. Slide left or right on the dial interface sliding operation to switch to the shortcut function

display, which has the day's movement data, sleep detection, watch information, function menu,

etc.

Introduction To the Connection between

Watch and Mobile Phone

1. Download and install APP (H Band)

Scan the QR code on the box or the built-in QR code on the watch via the mobile

browser program to download. Downloading needs WIFI network or data traffic. Install it

after downloading, open the APP after the installation, and give the software corresponding

rights which are needed for Bluetooth connection. (Note: H Band supports IOS9.0 or later

and Android6.0 or later)

(H Band QR Code)

2. The way to connect the watch to the phone (same for iOS and Android)

Turn on the Bluetooth of the mobile phone, and then open the H Band on the mobile phone

desktop (see Figure 1). You can choose to log in without an account or register with an account.

After the successful login, go to the home page. On the home page, click the red part "not

connected" to the Bluetooth search interface (see Figure 2). Select the corresponding device (X1)

and click to connect. Wait for a few seconds, it will prompt the watch to make a Bluetooth pairing

request with the mobile phone. Please allow Bluetooth pairing. This completes the pairing

connection between the mobile phone APP and the watch (Figure 3). Then, it will ask if you want

to upload data to the cloud (Figure 4). This operation can be selected by yourself. Clicking NO or

YES will enter the connection success interface and synchronize the data once (Figure 5). (Note:

The sync data function is automatically uploaded every 30 minutes. If you turn on the automatic

heart rate monitoring function, the heart rate is tested once every 10 minutes and then uploaded to

the APP.)

(Figure 1) (Figure 2)

(Figure 3) (Figure 4)

(Figure 5)

Important:

If the Apple mobile phone is not used for a long time (2 hours), in standby or hibernation (in

a state of blank screen), H Band may be cleaned by the Apple's IOS system. When the

connection of the APP and a watch is in the off state, the APP function will not be able to use.

Open the APP again, it will automatically reconnect on watch.

After installing the APP on the android phone, you need to open the background application

startup permission in the Settings of the phone, which is different for each phone. Take

Huawei mobile phone as an example, the steps are as follows:

Setting - Application -Application Startup Management-H Band, find the application, change

the automatic management to manual management, and open all permissions (allow self-startup,

allow associated start, allow background activities). This work is only for the application to keep

the Bluetooth connection with the watch without the Android system cleaning up when the phone

is in standby (the phone has no bright screen).

Watch Function Introduction

1. Heart Rate

Find the Heart Rate function in the Function Menu interface, click the Heart Rate icon to open and

start the heart rate test. The test lasts for 60 seconds and then the screen will automatically turn off

after the test. Before the test, please remain sitting still, do not wear the watch too tight or too

loose for ensuring data accuracy.

2. Multisport

a. Find the Multisport function in the function menu interface, click the multisport icon

to enter the sport mode. The watch provides 9 types of sports: outdoor run, outdoor walk,

indoor run, indoor walk, hiking, climbing, outdoor cycle, stationary bike, and elliptical.

Among them, outdoor run, outdoor walk, indoor run, indoor walk, hiking and above sports

modes can record the user's heart rate, calories, steps, mileage, and pace; Climbing, outdoor

cycle, indoor cycling, elliptical and other sports' mode can record the user's exercise heart rate and

calories; You can swipe up or down to switch data pages and choose to pause and continue.

b.Auto-exit: During the exercise, if the amount of exercise is too low for a long time, the

watch will automatically judge whether the user is in the current state of motion. If the watch

determines that the current condition of motion has not been met, it will automatically quit the

motion mode.

c. Data storage: The watch only holds the last three sport data.

d. Upload data to H Band: Open H Band and select Multisport. Watch the sports' history in

Multisport.

3. Message

This function can be set in the APP settings, when set it to "on", mobile phone received the

application (calls, text messages, QQ, WeChat, Facebook, twitter, Linkedlh, whatsApp, Line,

lnstagram, snapchat, skype, Gmail, other, etc.) when the messages are pushed, the watch shows

content (IOS need pairing; Android permission needs opening; equipment can push the normal

tips). The watch only can store 3 messages at most.

4. Find My Phone

Find out Find My Phone function in the function menu interface, click open the search

function to find the phone. If the mobile phone is connecting to the watch, the phone will vibrate

and ring. If in the off state, "unconnected Bluetooth" prompt will be displayed. Slide from left to

right or press the power button shortly to exit the Find My Phone function.

5. Music

Find the Music function in the Function Menu interface, click to open to enter the music

control interface. If the mobile phone and watch are connected, click the corresponding play, the

previous song, the next song, and pause to control the music playing on the phone player. If in the

off state, "unconnected Bluetooth" prompt will be displayed. Swipe from left to right or press the

power button shortly to exit the Music function, but the phone will not stop playing music. (Note:

There may be compatibility issues due to the large number of playback software and the large

number of Android phone manufacturers. Under normal circumstances, you can directly control

the phone's music play from the watch. Some music play software needs to be opened before you

can control it.)

6. Stopwatch

Find the Stopwatch function in the Function Menu interface, click to open the Stopwatch

function, click the start button in the lower right corner to start the timer, click the button again to

pause the timer, or click the button in the lower left corner to restore the timer. The screen will be

turned off after one minute of turning on the stopwatch. By wake screen on wrist raise function or

press the power button to wake up, the stopwatch interface will be displayed. The stopwatch

cannot be exited during timing. You need to click the Restore button in the lower left corner to

restore, then swipe from left to right or short press the power button to exit the Stopwatch

function.

7. Time Countdown

Find the Time Countdown function in the Function Menu interface, click to open, and you

can set the hours, minutes and seconds to count down. After setting the time, click Start to return

to the Function Menu. The countdown will continue in the background. When the countdown is

completed, there will add the pop-up window and vibrates to remind.

8. Settings

Find the Settings function in the function menu interface, click to open the Setting function,

you can set the Brightness adjustment and download the APP QR code. Brightness adjustment is

divided into 12 levels, which can be adjusted according to their own needs. The higher the

brightness is, the greater the power consumption will be. Scan QR code of APP to download H

Band.

Mobile APP function introduction

Notes: The APP sync data function synchronizes the step data and the heart rate data

automatically every 30 minutes. If you turn on automatic heart rate monitoring, the test will be

performed every 10 minutes and the data will be uploaded to the APP.

1、Message Reminder

Turn on "H Band"-> My-> My device-> Message Reminder, you can freely control the

function switch which can push messages to the watch. If the function switch is off, the

messages cannot be pushed to the watch; if it is on, the messages are normally pushed to the

watch. (Note: If you can't switch normally, please click the help in the upper right corner to

troubleshoot)

2、Alarm Clock Setting

Open "H Band"-> My-> My device-> Alarm Reminder-> click the upper right corner '+',

set the time and date of the reminder (if you set a Repeat Alarm, select the Repeat Time)->

click the top right Angle "√". The setup is OK.

3、Sedentariness setting

Open "H Band" --> My--> My equipment--> Sedentariness reminder--> turn on -->

click to enter the setting page (set the start and end time as well as sedentariness judging

interval) --> save. The default is 14:00 p.m.-18:00 p.m. and reminding every 60 minutes.

When it is "on", the user can set the sedentariness judging interval and the watch shall

start to continuously monitor the user to confirm whether he or she is sitting. In case the user

keeps sitting for more than the set time period, the watch will vibrate and display the

sedentariness reminder interface.

4、Heart rate alarming

Open "H Band" --> My--> My equipment--> Heart rate alarming --> turn on --> click to

enter the setting page (set the alarming value) --> save. The default is 115bpm. In case the heart

rate is detected equal to or higher than the set value, the watch will vibrate to remind the user.

5、Wrist rotating screen on

Open "H Band" --> My--> My equipment --> Sedentariness reminder--> turn on -->

click to enter the setting page (set the start and end time as well as sedentariness judging

interval) and wrist sensitivity --> save. The function only works within the set time period

and has no effect during other time period, and the default is from 06:00 a.m. to 22:00 p.m .

After unlocking this function, if the user rotates his or her wrist or raise his or her hand,

the watch screen shall turn bright. Besides, the screen-on time and sensitivity can be set in

APP.

6、Binding equipment

Open "H Band" --> My--> My equipment --> Binding equipment --> turn on.

After unlocking this function, when the watch syncs the data to APP, APP shall save the

data locally (if the user logs in without using any account) or upload to cloud (in case the user

logs with certain account).

7、Low-power consumption mode

Open "H Band" --> My --> My equipment --> Low-power consumption mode --> turn

After unlocking this function, both the wrist rotating screen-on time and message

notification screen-on time will be shortened and the message notification vibration sense

shall be weakened.

8、Switches setting

Open "H Band" --> My --> My equipment --> On-off state setting.

Set the on-off state of wearing checking, heart rate monitoring and connection

reminding, etc.

Wearing checking: after unlocking this function, the watch shall, before heart rate

measurement, check whether the user is wearing the watch correctly. If it is, then the watch

will start heart rate measurement or the induction lamp shall flash for a while and then go out

automatically with the screen off and the watch in standby mode.

Heart rate monitoring: After unlocking this function, the watch shall perform

automatic monitoring at regular intervals (every 10 minutes) and record relevant data. In case

it is bound to a mobile phone, the data shall be uploaded toAPP.

Connection reminding: after unlocking this function, when mobile phone disconnects

from the watch the watch shall display connection reminding page with vibration, screen off

3S later.

Altri manuali per X1

Indice

Altri manuali Blackview Orologio

Blackview

Blackview X1 Manuale utente

Manuali Orologio popolari di altre marche

Pandora

Pandora WATCH2 Manuale utente

Casio

Casio QW-4343 Manuale utente

Suunto

Suunto X6 Manuale utente

Seiko

Seiko N830 Manuale utente

MotionX

MotionX 365 Manuale utente

Garmin

Garmin VENU SQ 2 Manuale utente

QCY

QCY Watch GTC Manuale utente

Canyon

Canyon Cindy CNE-KW41WP Manuale utente

Esq

Esq Watches Guida all'installazione

Crane

Crane AA5-CDSM-3A Manuale utente

Timex

Timex W-214 Manuale utente

DETOMASO

DETOMASO MATERA Manuale utente

Geemarc

Geemarc Watch N Shake Manuale utente

LORUS

LORUS W590 Manuale utente

STENLILLE

STENLILLE Actío Manuale utente

Casio

Casio 5594 Manuale utente

Sinn

Sinn HUNTER'S WATCH 3. Edition Manuale utente

Slazenger

Slazenger SLZ800 Manuale utente