Blackview X1 Manuale utente

User Manual

Please read and understand the manual

Bind watch

Correct operation:Scan the

QR code below or download

“H Band” APP through the

mobile APP store to pair with

the watch

Wrong operation: Pair the

watch directly with the

Bluetooth in your mobile

phone's settings.

Bluetooth

Product Parameters:

odel X1 Screen Size 1.3 inches

Battery

apacity

260mAh

Charging

voltage

5V±0.2V

harging time 2.5hours Battery life 10 days

Waterproof

evel

5ATM Standby time 45 days

perating

emperature

-20 --45 Bluetooth

version

BLE5.0

creen

aterial

Corning Gorilla

3 generation

Strap width 22mm

Product Introduction

1. Slide up or down on the dial interface to switch the dial display.

2. Slide left or right on the dial interface sliding operation to switch to the shortcut

function display, which has the day's movement data, sleep detection, watch information,

function menu, etc.

Introduction To the Connection between Watch and Mobile Phone

1. Download and install APP (H Band)

Scan the QR code on the box or the built-in QR code on the watch via the mobile browser program

to download. Downloading needs WIFI network or data traffic. Install it after downloading, open the

APP after the installation, and give the software corresponding rights which are needed for Bluetooth

connection. (Note: H Band supports IOS9.0 or later and Android6.0 or later)

(H Band QR Code)

2. The way to connect the watch to the phone (same for iOS and Android)

Turn on the Bluetooth of the mobile phone, and then open the H Band on the mobile phone desktop

(Figure 1). You can choose to log in without an account or register with an account. After the

successful login, go to the home page. On the home page, click the red part "not connected" to the

Bluetooth search interface (Figure 2). Select the corresponding device (X1) and click to connect.

Wait for a few seconds, it will prompt the watch to make a Bluetooth pairing request with the mobile

phone. Please allow Bluetooth pairing. This completes the pairing connection between the mobile

phone APP and the watch (Figure 3). Then, it will ask if you want to upload data to the cloud (Figure

4). This operation can be selected by yourself. Clicking NO or YES will enter the connection success

interface and synchronize the data once (Figure 5). (Note: The sync data function is automatically

uploaded every 30 minutes. If you turn on the automatic heart rate monitoring function, the heart rate

is tested once every 10 minutes and then uploaded to the APP.)

Important:

　If the Apple mobile phone is not used for a long time (2 hours), in standby or

hibernation (in a state of blank screen), H Band may be cleaned by the Apple's

IOS system. When the connection of the APP and a watch is in the off state, the

APP function will not be able to use. Open the APP again, it will automatically

reconnect on watch.

　After installing the APP on the android phone, you need to open the background

application startup permission in the Settings of the phone, which is different for

each phone. Take Huawei mobile phone as an example, the steps are as follows:

Setting - Application -Application Startup Management-H Band, find the

applicationchange the automatic management to manual management, and open

all permissions (allow self-startup, allow associated start, allow background

activities). This work is only for the application to keep the Bluetooth connection

with the watch without the Android system cleaning up when the phone is in

standby (the phone has no bright screen).

(Figure 1) (Figure ５)

(Figure 2) (Figure ３) (Figure ４)

Watch Function Introduction

1. Heart Rate

Find the Heart Rate function in the Function Menu interface, click the Heart Rate icon to open and

start the heart rate test. The test lasts for 60 seconds and then thescreen will automatically turn off

after the test. Before the test, please remain sitting still, do not wear the watch too tight or too loose

for ensuring data accuracy.

2. Multisport

Find the Multisport function in the function menu interface, click the multisport icon to enter the

sport mode. The watch provides 9 types of sports: outdoor run, outdoor walk, indoor run, indoor

walk, hiking, climbing, outdoor cycle, stationary bike, and elliptical.

3. Message

This function can be set in the APP settings, when set it to "on", mobile phone received the

application (calls, text messages, QQ, WeChat, Facebook, twitter, Linkedlh, whatsApp, Line,

lnstagram, snapchat, skype, Gmail, other, etc.) when the messages are pushed, the watch shows

content (IOS need pairing; Android permission needs opening; equipment can push the normal tips).

The watch only can store 3 messages at most.

4. Find My Phone

Find out Find My Phone function in the function menu interface, click open the search function to

find the phone. If the mobile phone is connecting to the watch, the phone will vibrate and ring. If

in the off state, "unconnected Bluetooth" prompt will be displayed.

5. Music

Find the Music function in the Function Menu interface, click to open to enter the music control

interface. If the mobile phone and watch are connected, click the corresponding play, the

previous song, the next song, and pause to control the music playing on the phone player. If in the

off state, "unconnected Bluetooth" prompt will be displayed. (Note: There may be compatibility

issues due to thelarge number of playback software and the large number of Android phone

manufacturers. Under normal circumstances, you can directly control the phone's music play

from the watch. Some music play software needs to be opened before you can control it.)

6. Stopwatch

Find the Stopwatch function in the Function Menu interface, click to open the Stopwatch

function, click the start button in the lower right corner to start the timer, click the button again to

pause the timer, or click the button in the lower left corner to restore the timer. The screen will be

turned off after one minute of turning on the stopwatch. By wake screen on wrist raise function or

press the power button to wake up, the stopwatch interface will be displayed. The stopwatch

cannot be exited during timing. You need to click the Restore button in the lower left corner to

restore, then swipe from left to right or short press the power button to exit the Stopwatch

function. turning on the stopwatch. By wake screen on wrist raise function or press the power

button to wake up, the stopwatch interface will be displayed. The stopwatch cannot be exited

during timing. You need to click the Restore button in the lower left corner to restore, then swipe

from left to right or short press the power button to exit the Stopwatch function.

7. Time Countdown

Find the Time Countdown function in the Function Menu interface, click to open, and you can set

the hours, minutes and seconds to count down. After setting the time, click Start to return to the

Function Menu. The countdown will continue in the background. When the countdown is

completed, there will add the pop-up window and vibrates to remind.

8. Settings

Find the Settings function in the function menu interface, click to open the Setting function, you

can set the Brightness adjustment and download the APP QR code. Brightness adjustment is

divided into 3 levels, which can be adjusted according to their own needs. The higher the

brightness is, the greater the power consumption will be. Scan QR code of APP to download H

Band.

Mobile APP function introduction

Notes: The APP sync data function synchronizes the step data and the heart rate data

automatically every 30 minutes. If you turn on automatic heart rate monitoring, the test will be

performed every 10 minutes and the data will be uploaded to the APP.

1.Message Reminder

Turn on "H Band"-> My-> My device-> Message Reminder, you can freely control the function

switch which can push messages to the watch. If the functionswitch is off, the messages cannot

be pushed to the watch; if it is on, the messages are normally pushed to the watch. (Note: If you

can't switch normally, please click the help in the upper right corner to troubleshoot)

2.Alarm Clock Setting

Open "H Band"-> My-> My device-> Alarm Reminder-> click the upper right corner '+', set the

time and date of the reminder (if you set a Repeat Alarm, select the Repeat Time)-> click the top

3.Sedentariness setting

Open "H Band" --> My--> My equipment--> Sedentariness reminder--> turn on --> click to

enter the setting page (set the start and end time as well as sedentariness judging interval) -->

save. The default is 14:00 p.m.-18:00 p.m. and reminding every 60 minutes.

　When it is "on", the user can set the sedentariness judging interval and the watch shall start to

continuously monitor the user to confirm whether he or she is sitting. In case the user keeps sitting

for more than the set time period, the watch will vibrate and display the sedentariness reminder

interface.

4.Heart rate alarming

Open "H Band" --> My--> My equipment--> Heart rate alarming --> turn on --> click to enter the

setting page (set the alarming value) --> save. The default is 115bpm. In case the heart rate is

detected equal to or higher than the set value, the watch will vibrate to remind the user.

5.Binding equipment

Open "H Band" --> My--> My equipment --> Binding equipment --> turn on.

After unlocking this function, when the watch syncs the data to APP, APP shall save the data

locally (if the user logs in without using any account) or upload to cloud (in case the user logs with

certain account).

6.Firmware update

Open "H Band" --> My --> My equipment --> Firmware update.

In case there’s any new edition of the equipment program, connect APP and it shall remind the

firmware updating.

7.Clear data

Open "H Band" --> My --> My equipment --> Clear data.

Once this operation is started, the watch shall eliminate all the data and the on-off state of all the

functions shall be recovered to default.

Altri manuali per X1

Indice

Lingue:

Altri manuali Blackview Orologio

Blackview

Blackview X1 Manuale utente

Manuali Orologio popolari di altre marche

Pandora

Pandora WATCH2 Manuale utente

Casio

Casio QW-4343 Manuale utente

Suunto

Suunto X6 Manuale utente

Seiko

Seiko N830 Manuale utente

MotionX

MotionX 365 Manuale utente

Garmin

Garmin VENU SQ 2 Manuale utente

QCY

QCY Watch GTC Manuale utente

Canyon

Canyon Cindy CNE-KW41WP Manuale utente

Esq

Esq Watches Guida all'installazione

Crane

Crane AA5-CDSM-3A Manuale utente

Timex

Timex W-214 Manuale utente

DETOMASO

DETOMASO MATERA Manuale utente

Geemarc

Geemarc Watch N Shake Manuale utente

LORUS

LORUS W590 Manuale utente

STENLILLE

STENLILLE Actío Manuale utente

Casio

Casio 5594 Manuale utente

Sinn

Sinn HUNTER'S WATCH 3. Edition Manuale utente

Slazenger

Slazenger SLZ800 Manuale utente