Blade BM-7000s Manuale utente

1. Introduction ........................................................................................................... 2

1.1 Overview

1.2 Main Features

2. Safety/Precautions ............................................................................................... 3

2.1 Safety

2.2 Precautions

3. Check Point before Use ....................................................................................... 5

3.1 Accessories

4. Controls/Functions .............................................................................................. 6

4.1 Front Panel

4.2 Rear Panel

4.3 Remote controller

5. How to Connect .................................................................................................. 10

6. Operation ............................................................................................................ 11

6.1 Getting Started

6.2 System Setting

6.3 Channel Manager

6.4 Installation

6.5 Utils

6.6 Game

6.7 Common Interface

6.8 Conditional Access System

6.9 PVR

7. Trouble Shooting ............................................................................................... 57

8. Specifications ..................................................................................................... 58

Contents

DiSEqC is a trademark of EUTELSAT

6.9a Online Services



Be sure to read this user's manual before

starting the operation of the unit.



Do not touch the power cord with wet

hands as it may cause electric shock.



Never open the cover. It is very

dangerous to touch the inside of the

unit due to possible electric shock.



Place the unit in a well ventilated and

no-heat environment.



When you do not use this unit for a

long time, make sure that power cord

is pulled out from the outlet. Also do

not use a damaged power cord as it

may cause fire or electric shock.



A professional installation is required.

If reception is interrupted, contact

your local service centre.

Safety/Precautions

2.1 Safety

This satellite receiver is designed for using digital free-to-air channel reception. Enjoy the rich

choice of more than 10,000 different channels, broadcasting a large range of culture,

sports, cinema, news, events, etc. This receiver is a technical masterpiece, assembled with

the highest qualified electronic parts.

Introduction

1.1 Overview

ᶀVideo Resolution : 1080p / 1080i / 720p / 576p / 576i

ᶀDVR Ready via USB External Mass Data Storage Device

ᶀTime Shift, Record & Playback

ᶀUSB 2.0 Host for MP3 Playback, JPEG Viewing & Firmware Update

ᶀEmbedded CONAX CAS7

ᶀCommon Interface

ᶀDVB-S, MPEG-2/MPEG-4 Compliant

ᶀAdvanced Blind Scan

ᶀ1 HDMI output

ᶀMultisatellite search.

ᶀOn-screen display with true color full resolution.

ᶀDiSEqC control version 1.0, 1.1, 1.2 and USALS compatible.

ᶀEnhanced 16 favorite channel groups.

ᶀPowerful channel control by favorites, lock, skip, move and delete function.

ᶀChannel sort by alphabet, transponder and CAS.

ᶀMultilingual GUI (OSG & Menu): English, Spanish, Portuguese, French, German, Italian,

Turkish, Arabic, Persian, Russian, Deutsch, Netherlandic, Greek.

ᶀInstallation wizard

ᶀExtended EPG and program reservation on EPG.

ᶀTeletext & Subtitle by OSD and VBI

ᶀLast channel memory function.

ᶀTotal 10,000 channels programmable.

ᶀPreprogrammed channels (Optional)

ᶀDolby digital audio output (S/PDIF)

ᶀComponent output (YPbPr)

ᶀVarious games

ᶀSoftware & channel database upgrade via RS-232C: PC to STB/ STB to PC.

ᶀParental Lock/ Installation Lock / Receiver Lock / Channel Lock / Lock Channel Confirm.

ᶀAuto Voltage (AC 100 - 250V) SMPS.

ᶀZoom in function on pause/ live channel

ᶀMultipicture display.

ᶀHigh speed software upgrade via USB 2.0

ᶀMP3 play and JPEG viewer

ᶀLan 10/100Mbps Ethernet

ᶀManufactured under license from Dolby Laboratories.

“Dolby” and the double-D Symbol are trademarks of Dolby Laboratories.

1.2 Main Features

The accessories below are included with this receiver:

Points to Check before Use

3.1 Accessories

Your dish should be properly installed and azimuth and elevation must be precisely set up.

ᶀThis unit supports DiSEqC 1.2 and can work with a compatible antenna positioner.

Ask your dealer for information.

3.2 The Satellite dish

When installing the unit

2.2 Precautions



Install the unit horizontally. An uneven

installation may cause the unit to be

damaged.



Do not put heavy items such as a TV

set on the unit. That may damage

the unit.

Do not leave the unit where the

water drops or splashes.

Do not put water holding items such

as vases on the unit.



Moving the unit to a hot area from a

cold one will cause condensation.

Do not operate the unit for one or two

hours or until it has dried completely.

ᶀThe mains plug is used as the disconnect device.

The disconnect device shall remain readily operable.

Do not install the unit:

⍥Where it is subject to vibrations

⍥Where it is exposed to direct sunlight

⍥Where there is humidity

⍥Where the temperature is too high or too low.

⍥Where there is no ventilation

User's manual : 1

User's manual

Remote control : 1

Batteries (AAA type) : 2 HDMI cable : 1

ᶀ

If any of the above-listed

accessories is missing, contact

your sales representative.

4.2 Rear Panel

Controls/Functions

4.1 Front Panel

Power : Switches the receiver between “Standby” and “Power ON” modes.

Menu : To enter or exit the main menu.

Select : To show the Channel List in non-menu mode and select on item or confirm in

menu mode.

- VOL

ȜȞ : To change the volume level in non-menu mode and modify a setting

in menu mode.

- CH ƌƊ : To switch channels or change the cursor position on the application

screen.

Smart Card Reader (1 Slot) : Insert smart card for encrypted channel access.

Common Interface (1 Slot) : For CI module(PCMCIA module) with smart card towatch

pay TV channels.

2 6 8

1 3 97

No. Name Connector Function

1LNB INPUT IEC 169-24 FEMALE IF input from LNB to digital tuner

2LNB OUTPUT IEC 169-24 FEMALE IF loop-through output from digital tuner

3S/PDIF Fiber Optic Digital audio output (Optical)

4USB USB A-type USB 2.0

5VCR/AUX SCART SCART CVBS Video Output

CVBS, RGB Video Input

Audio Output

6TV SCART SCART Video output(CVBS, RGB)

Audio output(R, L)

7RS-232C DB-9 Low speed serial port

8LAN RJ-45 10/100Mbps Ethernet

9HDMI HDMI Digital Video/Audio Output

10 VIDEO RCA cinch Composite video output

11 AUDIO L RCA cinch Left audio output

12 AUDIO R RCA cinch Right audio output

13 Y RCA cinch Component video output(Y)

14 Pb RCA cinch Component video output(Pb)

15 Pr RCA cinch Component video output(Pr)

1 5

10 13711 14

2 3 64

8 9 12 15

4.3 Remote controller4.3 Remote controller

POWER :To turn the receiver On/Off.

MUTE : To turn the sound On/Off.

MOSAIC : To display multiple pictures.

SLEEP : To set the STB off after minutes.

FREEZE : To pause the video. Press again

to resume the video.

ZOOM : To zoom In/Out.

TV/RADIO : To switch between TV and

Radio.

SUBTITLE : To show the subtitle contents if

subtitle is transmitted.

AUDIO : To show the Multi-language audio

track, the stereo-mono mode and subtitle

information. Used for special functions in

menu mode.

Numeric Keys (0-9) : To enter numerical

settings (such as channel numbers) directly.

RECALL :To move to the previous channel.

Used for special functions in menu mode.

GROUP :To change the channel

groups(Satellites or favorite groups)

MENU : To enter or exit the main menu.

EXIT :To exit from the present menu and

move to the previous menu.

- Up & Down : To switch channels in non-

menu mode and move the cursor

up/down in menu mode.

- Left & Right : To change the volume

level in non-menu mode and modify a

setting in menu mode.

1817

1615

1OK : To show the Channel List in non-menu

mode and select an item or confirm in

menu mode.

INFO : To show information about the current

program. Press twice to show detail.

GUIDE : To show the TV/Radio program

guide.

PLAY :Play Content.

PAUSE : Pause playback.

FILELIST :To display the filelist.

STOP :Stop Playback.

REC : Start recording.

RWD : Playback in rewind mode.

FWD : Playback in forward mode.

SLOW : Playback in slow mode.

ADVANCE : Go to live channel.

- Color Key : Select the option such as

View List, Select Disk, Rename.

V.FORMAT : To switch the resolution of

video output.

Wide : To select a TV aspect ratio with Pan

Scan or Letter-Box(4:3) (Full screen or

Pillar box(16:9).

- Page Up/Down : To move to the next or

previous page when many pages are

available.

F1 : Media File Playback

F2 : Reserved button for new function

3837

3431

1110

Operation

6.1 Getting Started

After your receiver is powered on, proceed with installation as follows :

(1) Installation Wizard

1) Menu Language Setting

⊹Turn on your TV and receiver.

⊺The pop-up menu for language selection will appear <Figure 6-1-1>.

Select one language and press the to proceed.

How to Connect

5.1 When Connecting IRD to TV with AV connectors

Connect the TV antenna to TV ANT IN

Connect the Video and Audio of TV to the Video and Audio. Connect Red and White

connector to Audio R and Audio L, and Yellow into Video port respectively

Connect the Component Video of your TV to Component Video for best quality: connect

the Y, Pb and Pr of your TV to Y, Pb and Pr respectively

Connect your satellite dish

1312

6.1 Getting Started

3) Time Setting

This sub menu allows you to set your local time, wake up time, wake up channel and

sleep time. <Figure 6-1-3>

- GMT Usage : If you set ON, local time is determined by adjusting the differences from

GMT (Greenwich Meantime) according to your location.

- Current Date : If GMT Usage ON, this date is determined by GMT. If GMT Usage OFF, you

can modify this by pressing the button. If you set OFF, receiver doesn’t

refer to GMT. Local time is determined by adjusting current date and

current time.

- Current Time : If GMT Usage ON, this time is determined by GMT. If GMT Usage OFF, you

can modify this by pressing the NUMERIC button.

- Local Offset : If GMT Usage ON, Local time is GMT time + Local Offset.

- Summer Time : you can set the summer time mode (Off/Last Sun in Oct~Mar/First Sun in

Oct~Mar/Mar~Oct)

- Wake Up Mode : You can set the cycle of the wake up mode (Off/Once/Daily/Mon~Fri)

- Wake Up Time : You can set wake up time by pressing the NUMERIC button on the

remote.

- Wake Up Channel : You can set wake up channel by pressing the button on the

remote.

- Sleep Mode : You can set the cycle of the sleep mode (Off/Once/Daily/Mon~Fri)

- Sleep Time : You can set sleep time by pressing the NUMERIC button on the remote

- Automatic Standby : Selects auto standby time (OFF/After 1~8Hour) After making your

selection press to confirm

- Timer Lead Time : Press to set the Timer Lead In And Lead Out Time.

6.1 Getting Started

3) A/V Output Setting

This sub menu allows you to set audio/video output setting. <Figure 6-1-2>

- SCART : Select the SCART output. (CVBS/RGB)

- Screen Format : Select the screen format. (16:9/4:3)

- Display Format : Select the TV aspect ratio(Full Screen/Pillar Box, Letter Box/Pan Scan)

- Video Format : Select the Scanning type(Interaced, Progressive)

- SPDIF : Select the Audio output type (Dolby SPDIF/PCM/DOLBY HDMI)

1514

6.1 Getting Started

(When the DiSEqC Motor parameter is set as 1.2)

- Motor Step : Select Motor Step

- Move : Move the dish position to west/east by pressing / buttons.

- Go To : Go to the position of the saved satellite.

- Motor Control : Control motor by press button ot the remote.

⍜Recalculate : Recalculate the position of all other saved satellites relative to the

known position.

⍜Reset System : Reset the position of all saved satellites.

⍜Goto Reference : Move the dish to the 0 position.

⍜Set West Limit : Edit & Save west limit by pressing / or buttons.

⍜Set East Limit : Edit & Save east limit by pressing / or buttons.

⍜Enable Limit : Enable the saved east and west limit.

⍜Disable Limit : Disable east and west limit.

⍜Save : Save the current setting of DISEqC 1.2 system.

6.1 Getting Started

4) Dish Setup

⊹Press the MENU button to display the main menu.

⊺Use / and / to move in the menu.

⊻Press on ‘Dish Setting’. The following window will appear. <Figure 6-1-4>

Note : Enter a 4-Digit password if need arise. The default password is ‘0000’.

⊼Select the item that you want to edit, and set its parameters as desired. <Dish Setting>

- Satellite : Select any satellite by pressing / buttons.

- Frequency : If the default TP frequency is not appropriate, you can select another TP

frequency at which to check for signal

- LNB Power : Select among ON/OFF/13V/18V.

- LNB Type : Select among Universal/OCS/Single.

- LNB Freq : Set the frequency of the LNB oscillator.

- 22KHz : When not AUTO, set the signal path from LNB or switch by selecting a control

signal among 0/22KHz.

- DiSEqC 1.0 / 1.1 : Select DiSEqC protocol among OFF/1.0/1.1 as appropriate for your

configuration. <Figure 6-1-5>

- DiSEqC Motor : Select DiSEqC protocol among OFF/1.2/USALS as appropriate for your

Motor. <Figure 6-1-6>

⊽Auto Scan : Press Green button the remote to begin Auto Scan.

1716

6.1 Getting Started

5) Satellite Channel Search

ᶀAuto Scan <Figure 6-1-9>

⊹To select more than one satellite, press the button when the selection bar is

positioned on the satellite.

⊺Press on the names of the satellites that you want to scan under ‘Satellite List’.

Press the EXIT button to close the ‘Satellite List’.

⊻Press / and set the ‘Search Type’ and ‘Network Search’ parameters.

- Search Type : Decide for which channels to search (All channels/ Free channels

only/ TV channels only).

- Network Search : Set ON to find more transponders (frequencies) through a Network

Information Table (NIT) scan. That is, when the broadcaster is

sending a NIT through a given transponder, the receiver will also

scan for transponders listed in the NIT and not otherwise recognized.

(this can happen when a transponder is new)

⊼Press RED buttom under ‘SCAN’ to scan the selected satellites. <Figure 6-1-10>

6.1 Getting Started

(When the DiSEqC Motor parameter is set as USALS)

- Move : Move the dish position to west/east by pressing / buttons.

- Motor Control : Control motor by press button ot the remote.

⍜Goto Reference : Goto reference by pressing button.

⍜Set West Limit : Edit & Save west limit by pressing / or buttons.

⍜Set East Limit : Edit & Save east limit by pressing / or buttons.

⍜Enable Limit : Enable the saved east and west limit.

⍜Disable Limit : Disable Limit by pressing button.

⍜Save : Save the current Setting of USALS system.

- Sat Degree : Displays the current defree of the selected satellite. Edit degree by

pressing / buttons and numeric buttons.

- Position Setting : Select position setting by pressing button.

⍜Antenna Longitude : Edit antenna longitude by pressing / buttons and numeric

buttons.

⍜Antenna Latitude : Edit antenna latitude by pressing / buttons and numeric

buttons

- Go To : Save the current setting of USALS Systme.

1918

6.1 Getting Started

ᶀBlind Scan<Figure 6-1-13>

⊹To change a transponder’s Frequency use the NUMERIC buttons.

⊺Select a range of Symbol Rate(FULL/7.5M Over/7.5M Under/3.7M Under/DETAIL).

⊻Select a Poliariaztion(V/H/ALL).

⊼Select a Search Type(All/FTA/TV).

⊽Select a Frequency Step(1/2/4/8/16/32 MHz)

⊾Press RED to begin the scan.

6.1 Getting Started

ᶀManual Scan <Figure 6-1-11>

⊹Select a transponder.

⊺To change a transponder’s information (Frequency, Symbol Rate), use the NUMERIC

buttons.

⊻To add a new transponder, press the GREEN button.

⊼To delete a transponder, press the YELLOW button with the cursor next to the

Frequency parameter.

⊽To search a transponder, set its different parameters and RED button.

ᶀPackage Identifier (PID) Scan <Figure 6-1-12>

⊹Select a transponder.

⊺To change a transponder’s information (Frequency, Symbol Rate), use the NUMERIC

buttons.

⊻To add a new transponder, press the GREEN button.

⊼To delete a transponder, press the YELLOW button with the cursor next to the

Frequency parameter.

⊽To search a transponder, set its different parameters and press / You can

search a specific channel of the transponder by setting its PID data (Video, Audio and

PCR).

Note : If you cannot access programs after correctly completing a scan procedure,

please contact your seller or your installer.

Indice

Altri manuali Blade Ricevitore

Blade

Blade BM5000S Manuale utente

Manuali Ricevitore popolari di altre marche

Garmin

Garmin GA 23 Manuale utente

Aiphone

Aiphone PS-12F Manuale utente

IMES

IMES TCS-01CA-PMI Manuale utente

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuale

AMIMON

AMIMON AMN12310 WHDI Manuale utente

Dual

Dual DMCPA79BT Istruzioni operative

Sound Associates

Sound Associates SA652P Manuale utente

Sherwood

Sherwood NewCastle R-772 Manuale utente

Audio

Audio A10-RX Series Manuale utente

AllSee

AllSee PushShare PSRV1.1 Manuale utente

DEMAG

DEMAG DRC-DR D2 Manuale utente

Teleco

Teleco TVRCL868A02 Manuale utente

Bosch

Bosch RF3222E Manuale utente

Kramer

Kramer 631R Manuale utente

Xpress

Xpress xmc10 Manuale utente

JVC

JVC KD-MR1BTS Manuale utente

Omega Engineering

Omega Engineering UWTC-REC3 Manuale utente

e-survey

e-survey E300 Pro Manuale utente