BlazeVideo T326 Manuale utente
TRAIL CAMERA
MODEL: T326
INSTRUCTION MANUAL
V1.0
TABLE OF CONTENT
1. IN THE BOX ....................................................................... 1
2. IMPORTANT NOTE ........................................................... 1
3. INTRODUCTION ................................................................2
3.1. About The Camera ...................................................2
3.2. Applications ............................................................. 3
4. PARTS AND CONTROLS ..................................................3
5. INSTALLING THE BATTERIES AND SD CARD ...........7
5.1. Loading Batteries .................................................... 7
5.2. Inserting The SD Card .............................................8
6. USING THE CAMERA .......................................................9
7. THE OFF, ON, AND SURVEILLANCE MODES ............. 9
7.1. OFF Mode ............................................................. 10
7.2. ON Mode ................................................................10
7.3. SURVEILLANCE Mode .........................................11
8. ADVANCED SETTINGS ................................................. 12
9. MOUNTING AND POSITIONING THE CAMERA ....... 17
9.1. Mounting ................................................................17
9.2. Sensing Angle and Distance Test ...........................18
9.3. Starting .................................................................. 19
10. REVIEW PHOTOS OR VIDEOS ................................... 20
11. TECHNICAL SPECIFICATIONS .................................. 21
12. TROUBLESHOOTING ...................................................23
13. WARRANTY ...................................................................24
1
1. IN THE BOX
1 x Camera, 1 x Mounting Strap,
1 x Instruction Manual, 1 x Mini USB Cord
Note: Memory card and batteries are not included (user
supplied).
2. IMPORTANT NOTE
Require eight (8) 1.5V AA Alkaline or Lithium batteries.
We recommend the use of Energizer AA Lithium batteries
in this camera to obtain maximum battery life.
Do not mix old and new batteries. Do not mix battery type.
Rechargeable NiMH AA batteries can be used, but are NOT
recommended as the lower voltage (generally 1.2V) they
produce can cause night recording issues, and you also may
have to replace them frequently.
Require a standard-size SD memory card (max capacity
128GB, Class 10). We recommend using SanDisk 32GB
SDHC/Class10 memory cards in the camera to obtain the
best cost-performance.
Remove batteries when the camera is NOT in use.
Before first use, please format your SD card in the
camera.
Before first use, please gently remove the protective films
on the front of the camera to get the best performance,
especially the protective films on the PIR lens may cause
motion detection performance downgrades, eve no captures.
2
3. INTRODUCTION
3.1. About The Camera
The trail camera is a new generation of digital scouting
camera, it can be triggered by any movement of game in a
location, detected by a highly sensitive Passive Infra-Red
(PIR) motion sensor, and then take high quality pictures ,
video clips.
The Camera features the all new innovative imaging
technology. The camera encompasses all-new software
innovations, smart illumination technology, blur reduction
technology, auto noise reduction and dynamic exposure
technology to deliver high resolution image quality.
Main features:
High quality pictures (up to 32MP still photos), 1440P/2k
30fps or 1296P 30fps H.264 video clips with audio.
Clear night vision, flash range 100ft. The camera is
equipped with 40pcs high performance infrared no glow
940nm LEDs that function as a flash.
Wide view angle - 70°.
Easy to use/program with well-designed operation
buttons and built-in 2.4-inch LCD color screen, easy to
review pictures and videos on the screen.
Two working modes – Motion detection and Time lapse.
Fast trigger time approx. 0.2~0.75 second (pre-activated
technology with 3 PIR sensors designed), Fast recovery
time of less than 0.5 second, Long trigger distance up to
90ft.
Date Stamp on each capture: Date, Time, Temperature &
Moon Phase.
Monitoring Period, Loop Recording, Time Lapse,
3
Password protected.
Built for any climate - IP66 Waterproof designed for
outdoor use and resistant against rain and snow.
Operation Temperature -4~140°F.
Support SD/SDHC/SDXC memory card, max capacity
128GB (user supplied).
Extremely long in-field battery life up to 8 months in a
stand-by state with 8 AA 1.5V batteries (user supplied).
3.2. Applications
The camera can be used as follows:
For hunting and tracking animals’ trace or habits
For wildlife observing and researching, captures pictures
and videos of wild animals
As a motion-triggered security camera, for home, farm,
office and community
All other indoor & outdoor surveillance where invasion
evidence needed
4. PARTS AND CONTROLS
The camera is equipped with 40pcs built-in high efficiency
infrared LEDs, LED Indicators, Lens, PIR Sensors, Lock
Holes in front view (Figure 1).
TIP: During use, the black PIR Lens may become dirty or
have scratches, however it does not affect the performance
due to the reliability design of the PIR lens. If you must
clean it, please try to blow it off or pick out the dirt very
lightly. Do not try to wipe it, which may cause more
scratches.
4
Figure 1: Front View
The camera provides the following connections for external
devices: Mini USB port and SD card slot etc. (Figure 2).
IR LEDs
Lock
Hole
Optical
Lens
Central
PIR Lens
Light
Sensor
Indicator
Lock
Buckle
Side
PIR Lens
Side
PIR Lens
5
Figure 2: Bottom View
The camera has two strap holes on the back. The strap can
be put through the strap holes and fastened securely around
the tree trunk by pulling the end of the strap firmly (Figure
3).
Figure 3: Back View
Tripod Base
1/4" - 20
SD Card
Holder
DC 12V/1A
Plug
4.0x1.75mm
Mini
USB Port
Microphone
Security
Cable
Hole
Lock
Buckle
Strap
Hole
6
The camera has a 2.4-inch built-in LCD screen, which can
be used for reviewing pictures or videos and menu
displaying, and unique keypad design for easy program and
operation, 8 AA batteries slot supported (Figure 4).
Figure 4: Inside View
Figure 5: Operation Buttons and Shortcut
A 2-way power switch is used to select the main operating
modes: OFF and ON(Figure 5).
A power switch is used to power on (ON mode) or off the
camera (OFF mode). A START button is used to quickly
make the camera into the surveillance mode (motion
SHOT Key as
Manual Shutter
Replay Key as
Playback Mode
Power Switch
Color
Screen
Battery
Compartment
and Cover
Operation
Buttons
START Key as
Surveillance
Mode
7
detection or time lapse) per your settings(Figure 5). When
the camera is in the surveillance mode, press the START
button to wake up the camera.
5. INSTALLING THE BATTERIES AND SD CARD
Before you start learning how to use your camera, you will
first need to install a set of batteries and insert an SD card.
Although that may only take you a minute, there are some
important notes about both batteries and SD cards you
should be aware of, so please take the time to read the
following directions and cautions:
5.1. Loading Batteries
After opening the cover of the battery compartment, you
will see that the camera has eight battery slots (Figure 6). A
full eight batteries must be installed for the camera to
operate. Be sure to insert each battery with correct polarity
(negative or "flat" end against the long spring of each
battery slot).
In the ON mode when battery power level gets low, the
message "Low Battery" will show on the screen, please
replace the batteries. If the battery indicator shows in RED,
this does mean the batteries are not able to drive IR LEDs
flash at night, however the batteries still work at daytime
until "Low Battery". If you want to continue night vision,
please replace the batteries.
8
Figure 6: Loading the Batteries
5.2. Inserting The SD Card
Insert the SD card (with the camera's power switch in the
OFF position) before beginning to operate the camera. Don't
insert or remove the SD card when the camera is powered
on or in the surveillance mode. The camera uses a
standard-size memory card to save photos (in .JPG format)
and/or videos (in .MP4 format). SD and SDHC (High
Capacity)/SDXC cards up to a maximum 128GB capacity
are supported (Figure 7).
Figure 7: Inserting the SD Card
+
+
+
一
Indice
Altri manuali BlazeVideo Telecamera da ricognizione
BlazeVideo
BlazeVideo A262 Manuale utente
BlazeVideo
BlazeVideo A323 Manuale utente
BlazeVideo
BlazeVideo A350W Manuale utente
BlazeVideo
BlazeVideo A323 Manuale utente
BlazeVideo
BlazeVideo A350 Manuale utente
BlazeVideo
BlazeVideo A390G Manuale utente
BlazeVideo
BlazeVideo A323 Manuale utente
BlazeVideo
BlazeVideo A252 Manuale utente
BlazeVideo
BlazeVideo A280W Manuale utente
BlazeVideo
BlazeVideo A252 Manuale utente
