BlissLights Ark Manuale utente
User’s Guide
Model: Ark
Ark Laser Projector
Please ONLY use
manufacturer-provided
USB cord and adapter.
EC 62472 Risk Group 1
ENGLISH.............................................................................1
FRANÇAIS..........................................................................6
ESPAÑOL ........................................................................ 13
ENGLISH - TABLE OF CONTENTS
Notice ..............................................................................................................................1
Introduction ..................................................................................................................2
Before You Begin..........................................................................................................2
Parts List..........................................................................................................................2
Setting up the Laser Projector................................................................................3
Default Settings ...........................................................................................................3
Installation Tips ............................................................................................................4
Product Specications...............................................................................................4
Limited Warranty.........................................................................................................5
Caution............................................................................................................................5
Cleaning Instructions.................................................................................................5
Disposal...........................................................................................................................5
1
NOTICE
CAUTION—Use of controls or adjustments or performance of procedures other than those
specied herein may result in hazardous radiation exposure.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This product is classied as a Class 3R laser product and complies with the applicable parts
of IEC/EN 60825-1 Ed. 2.0:2007 and Ed. 3.0:2014. The manufacturer additionally certies it
complies with the US FDA Federal Laser Product Performance Standard (FLPPS) provided in
21 CFR Subchapter J, 1040.10 and 1040.11 except for allowable deviations specied in FDA
Guidance documents.
Do not stare into the beams emitted from the product. Intentional long term viewing
of CLASS 3R levels of laser light can be hazardous. This product uses diractive optics
to scatter the beam energy. This scattering eect causes the energy concentration to
drop below the exposure limits for momentary or accidental viewing at a relatively short
distance from the laser aperture. As with all bright light-sources, when you operate this
device in unsupervised general public areas, it is recommended that up-close access to the
light be restricted or prevented and the beams be directed into locations were persons are
not expected.
This laser display device incorporates a CLASS 3B laser system which, by itself, may be
hazardous. However, this laser display product incorporates a protective housing and
diractive optics in its design so that there is no exposure or human access to laser
radiation during operation or maintenance above the CLASS 3R limits. Each individual laser
beamlet’s power is below the Class 3R limit of 5 mW.
UNDER NO CIRCUMSTANCES shall attempts be made to open the protective housing or
operate the device if the aperture window is damaged.
All service to this laser display device requiring the protective housing to be opened and/
or removed shall be performed by service personnel or their authorized agents. Opening
the protective housing voids the warranty.
NO LASERS SHOULD BE POINTED INTO THE SKY WITHIN 10 NAUTICAL MILES
(18.5 km) OF AN AIRPORT. IF YOU ARE LOCATED WITHIN THIS SPECIFIC PERIMETER, WE
RECOMMEND THE LASERS BE POINTED DOWN AT THE GROUND SO NO STRAY BEAMS
ARE PROJECTED INTO THE AIR. CHECK WITH YOUR LOCAL AIRPORT OR PROVINCIAL
GUIDELINES FOR FURTHER INFORMATION.
2
IMPORTANT NOTE:
Use only manufacturer-provided adapter.
Use of 3rd party adapters may damage the unit and void the warranty.
Adapter may vary from picture shown.
INTRODUCTION
Thank you for purchasing the BlissLights Ark Laser Projector. This product is a unique indoor
light xture that uses patented laser and holographic technology to project an abstract
transforming Ark against a drifting nebula cloud.
Each unit provides up to 20 x 20 ft of coverage. It has maximum electrical usage of less than
5 Watts and operates in temperatures between 14°F to 95°F (-10°C to 40°C).
BEFORE YOU BEGIN
Immediately upon receiving the xture, carefully unpack and check the carton contents to
ensure that all parts are present and in good condition. Notify the retailer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the
carton itself shows signs of mishandling. Save the carton and all packing materials. In the
event that the xture must be returned, it is important that the xture be returned in the
original factory box. Please see parts list below for box contents.
PARTS LIST:
1) Laser Projector
2) USB Power Cord
3) USB to Wall Adapter
1
2
3
3
Before operating your laser projector, please read the“Before you Begin”section and
“Notice”section of this user’s guide.
SETTING UP THE LASER PROJECTOR
1. Insert the USB power cord into a powered USB port or use the included wall adapter to
connect to an available electrical outlet.
2. Place the Ark on a at solid surface and aim toward desired ceiling/wall.
3. Press the power button. The nebula and laser will gradually illuminate
and begin moving by default.
4. To adjust the illumination angle for walls, slide the unit down to the forward position.
5. To turn o the light, cycle through the power button modes until the unit turns o
completely. Remove the power plug from electrical outlet.
6. Use the following buttons to control lighting eects:
Button 1 (eects):
• Power on
• Pulse mode
• Laser only
• Cloud only
• Power o
Button 2 (rotation):
• Rotation o
• Rotation on
Button 3 (brightness):
• High
• Medium
• Low
DEFAULT SETTINGS
Once the laser projector is plugged in, it will enter the default mode where all eects are
on. Use the buttons to change the eect settings and brightness. This light has a built-in
timer that is designed to automatically shut o after 6 hours of operation.
4
PRODUCT SPECIFICATIONS
Designed in the USA
By BlissLights LLC
Made in China
INSTALLATION TIPS
• Do not connect the light to a dimmer pack, as a dimmer accessory may damage
the laser component.
• The darker the display area, the brighter your projection will appear.
Laser Classication Class 3R
Laser Wavelength Green - 505nm ±5nm
Nebula Cloud Color Blue - 450nm
Housing ABS plastic
Power consumption Less than 5 W
USB Power Adapter Input 100-240 V ~ 50/60 Hz , 0.2 A
USB Power Adapter Output 5V --- 1A
Operation Indoor
Operating Temperature 14°F to 95°F (-10°C to 40°C)
Projection Coverage Laser - 20 x 20 ft Nebula cloud - 15 x 15ft
Maintenance Maintenance Free
Dimensions 9”L x 3.5”W x 5”H
Cord Length 5 ft (1.5 m)
5
BLISSLIGHTS LIMITED WARRANTY
This product carries a limited warranty against defects in workmanship and materials. BlissLights
LLC agrees to replace the defective product free of charge within the stated warranty period, when
returned by the original purchaser with proof of purchase. This product is not guaranteed against
wear or breakage due to misuse and/or abuse. For detailed warranty information for your country,
please visit www.blisslights.com/warranty
CAUTION
This is not a toy. Young children must be supervised while using this device at all times.
This unit is not waterproof. Use and store indoors or in a dry place.
CLEANING INSTRUCTIONS
Surface clean only with a soft, dry cloth. Unplug unit before cleaning.
DISPOSAL
At the end of its serviceable life, this product should not be treated as household or general waste. It
should be handed over to the applicable collection point for the recycling of electrical and electronic
equipment.
Guide d’utilisation
Modèle: Ark
Projecteur À Laser Ark
Veuillez utiliser UNIQUEMENT
le cordon et l’adaptateur
USB fournis par le fabricant.
EC 62472 Groupe à Risque 1
RADIATION À LASER
ÉVITER L’EXPOSITION DIRECTE DES YEUX
PRODUIT LASER DE CLASSE 3R
Laser-Max à diode. Sortie < 5mw
Longueurs d’onde 400-700 nm
Classié selon la norme IEC 60825-1 Ed.3.0:2014
Indice
Lingue:
Altri manuali BlissLights Proiettore
BlissLights
BlissLights PIXXI PX-1 Manuale utente
BlissLights
BlissLights BL-50 Manuale utente
BlissLights
BlissLights SKY Lite Manuale utente
BlissLights
BlissLights TRIO Manuale utente
BlissLights
BlissLights Cloud SKY-CLOUD-RCWB Manuale utente
BlissLights
BlissLights SKY Lite Manuale utente
BlissLights
BlissLights Evolve SKY-EVOLVE-B-RCWB Manuale utente
BlissLights
BlissLights SKY Lite Manuale utente
