USER MANUAL
2
Connecting the Hardware
Conecting Wi-Fi.
Connecting via network cable
Device Connection
1. Near the wireless router, plug one end of the enclosed power adapter into the power jack of the
camera, and the other end of the power adapter into the wall outlet.
2. When camera finishes rotating and Ding-Dong tone coming out, it means that IP camera is waiting
for receiving Wi-Fi signal (if you connect the camera with Ethernet cable, there will not be any
Ding-Dong tone coming out from camera).
3. Make Wi-Fi available on your mobile phone.
Note: when the IP camera is in the initial state, there is Ding-Dong tone coming out from it. Here
are three methods to suspend the Ding-Dong tone:
1. connect your IP camera to the router with Ethernet cable;
2. connect your IP camera to the router via smart-config;
3. power off the IP camera.
