BlueTrek CRESCENDO - Manuale utente

User guide

Enjoy the ultimate voice control headset.

You only need to say. No voice training required. Let’s start !

Dual mic noise cancellation bluetooth® headset

English

BLUETREK CRESCENDO I 1

Get started...

• Fully charge your headset for 2 hours.

• Select the ear bud and ear hook that t for your ear.

• Wear the headset.

• Press the main button for 5 sec.

You will hear the welcome message :

“Hi, Welcome to the Bluetrek Crescendo

headset with the BlueGenie Voice Interface.

To get started you’ll need to pair your headset.

Click the main button to enter pair mode.”

• Follow the instruction, press once on the main button to enter pair mode.

• Enable the Bluetooth® search function on your device. Select “Crescendo” and enter

“0000” as the passcode to contact with the headset.

• To use voice control, press the Main Button, wait for the “Say a command” prompt to

nish, then say your command.

• At any time you can use the “What Can I Say” command to be remember the available

commands.

Main button

LED light

English

2 I BLUETREK CRESCENDO

Special Commands to access FREE service in USA

You can say “Call Information” to search for local and business listings with

Bing™ 411. Find news, directions, restaurant locations, weather forecasts,

movie showtimes, and more.

You can say “Trac Conditions” to connect to local 511 services to check

trac condition in USA. For example, road work, trac jam, accident

information etc...

Simply set up your speed dial list for customized number

Set up your Speed Dial List Speed Dial Position Contact to assign

(Please refer to your

phone’s User Manual to

learn how to input them

and program as this table.)

Favorite 1 / voice mail

Favorite 2

Favorite 3

Favorite 4

Favorite 5

Home

Oce

NOTE : If you have set a favorite number in the mobile phone’s speed dial list and headset

favorite list at same position, when you say the “Call favorite“ command, the number saved in

the headset will be taken nally.

If your mobile phone do not have / support Speed Dial feature, you can save favorite number

on Crescendo headset (A phone number can be saved as a favorite after you have received an

incoming call from that number.) Please see the instructions as below:

1. Press once on the Main Button, wait for the “Say a command “prompt to nish, then say

“Settings menu” command.

2. Say “Save Favorite” command, you will hear the instruction message from the headset and

be asked to tell the favorite position.

3. Say the position you preferred like “Call Favorite 1”, you will hear the conrmation message

from the headset.

4. Answer “Yes” and the phone number will be saved as your favorite.

* If you want to remove all favorite numbers set under the headset, you can reset the software

by pressing the Main button together with “Vol+” button for around 7 seconds.

Save Favarite Number from incoming call

English

4 I BLUETREK CRESCENDO

Voice Command

The following is a comprehensive list of the available commands.

At any time you can use the “What Can I Say” command to listen the available commands.

Command Say this to...

What Can I Say? Tell you all available commands

Pair Mode Enter the pairing mode

Am I Connected? Tell you if connected to a phone

Phone command Connect to phone’s voice recognition function

(if mobile phone supported)

Check Battery Tell you the status of the headset’s battery level

Redial Dial the last dialed number

Call Back Dial the last received number

Call Information Connect to Bing411 voice search center

English

BLUETREK CRESCENDO I 5

Call Voice mail/ Favorite 1 Call number preset on Speed Dial 1

Call Favorite 2 Call number preset on Speed Dial 2

Call Favorite 3 Call number preset on Speed Dial 3

Call Favorite 4 Call number preset on Speed Dial 4

Call Favorite 5 Call number preset on Speed Dial 5

Call Home Call number preset on Speed Dial 6

Call Oce Call number preset on Speed Dial 7

Trac Conditions Connect to local 511 center for Trac conditions

Answer Answer the incoming call

Ignore Reject the incoming call

Settings Menu Enter to setting menu

Cancel Cancel the active operation

Yes Answer “yes” for yes/no question

No Answer “no” for yes/no question

English

6 I BLUETREK CRESCENDO

Multi-point function

Multipoint technology which allows you to use one headset with two dierent Bluetooth

mobile phone simultaneity. Please see the instructions as below:

Enable the multi-point function

1. Pair the headset to the mobile A (Please refer to “pairing” section).

2. Long press the Vol + and the Vol - button together on the headset under stand-by mode,

when heard a “beep”, release the buttons and you will hear “Multi-point on” prompt to

nish, the multi-point function will be enabled.

3. Press Main button and the Vol - button together to reset the hardware, the headset will

turn o automatically.

4. Press and hold the Main button for about 5 seconds to enter into pairing mode, then pair

it to the mobile B.(Please refer to “pairing” section).

5. Turn o and turn on again the headset. Two mobiles will be connected with the headset

automatically.

English

BLUETREK CRESCENDO I 7

Disable the multi-point function

Long press the Vol + and the Vol - button together on the headset under stand-by mode,

when heard a “beep”, release the buttons and you will hear “Multi-point o” prompt to

nish, the multi-point function will be disabled.

Answer a call while talking on the other paired phone

• To answer the second call and put the current call on hold, double press the Main button to swap

• To answer the second call and terminate current call , press once on the Main Button

*To avoid issues switching between calls, suggest using the call control button on the

headset rather than your phone controls.

English

8 I BLUETREK CRESCENDO

Settings menu

Under settings menu, you can set:

• Say a command prompt - Enables or Disables the “Say a command prompt”. With it disabled,

you will hear a beep instead of voice command.

• Incoming call announcement - Enables or Disable the Incoming call ID prompt and voice

answer functions (this function may not available on some phones).

• Save favorite - A phone number can be saved on the headset after you received an incoming call.

• Voice control help

• Turn o voice control - Turns o the voice control. To re-enable, hold the “Vol+” and “Vol-“ button

simultaneously for about 6 seconds.

Reset the Crescendo headset

If the headset fail to communicate or any abnormal behavior, you may need to do hardware reset,

which will make the headset get back to normal work again. If hardware reset doesn’t resolve

your problem, you may need to do software reset, which will deletes all pairing information, reset

the voice interface and reboot headset back to pairing mode.

To do hardware reset, press once on the Main Button together with “Vol-“button.

To do software reset, press main button together with “Vol +” button for 6 sec until the red LED

ashes.

English

BLUETREK CRESCENDO I 9

Control the headset by button

Function Button Time Status

Power On Main button 5 sec From o

Power O Main button 7 sec From on / Standby

Enter Pairing Mode Main button 7 sec From o

Activate Voice control Main button Press once

Idle / Pairing / Standby

(when voice control

on)

Answer Call Main button Press once Ringing

Reject Call Main button 3 sec Ringing

End Call Main button Press once Active calls

Redial Main button Double click Standby (Connected)

Volume adjust Vol + / Vol - Press once Active calls / Standby

Mic Mute On/O Vol + / Vol - 3 sec Active calls

Turn Voice Control On Vol + & Vol - 6 sec Pairing / Standby

Software Reset Main button & Vol + 7 sec Pairing / Standby

Hardware Reset Main button & Vol - Press once Any status

Altri manuali per CRESCENDO -

Indice

Altri manuali BlueTrek Cuffia

BlueTrek

BlueTrek Metal Manuale utente

BlueTrek

BlueTrek METAL EVOLUTION Manuale utente

BlueTrek

BlueTrek Sense Manuale utente

BlueTrek

BlueTrek CRESCENDO - Manuale utente

BlueTrek

BlueTrek Skin Manuale utente

BlueTrek

BlueTrek Mini Manuale utente

BlueTrek

BlueTrek Carbon Smart Manuale utente

BlueTrek

BlueTrek Mini-Clip Manuale utente

BlueTrek

BlueTrek Bizz Manuale utente

BlueTrek

BlueTrek Sugar Manuale utente

BlueTrek

BlueTrek X3 Manuale utente

BlueTrek

BlueTrek Tattoo Manuale utente

BlueTrek

BlueTrek M2 Manuale utente

BlueTrek

BlueTrek X3 Manuale utente

BlueTrek

BlueTrek S21 Manuale utente

BlueTrek

BlueTrek Tattoo Manuale utente

BlueTrek

BlueTrek UFO Manuale utente

BlueTrek

BlueTrek MUSICALL Manuale utente

BlueTrek

BlueTrek Bizz Manuale utente

BlueTrek

BlueTrek METAL EVOLUTION Manuale utente

BlueTrek

BlueTrek Mini Manuale utente

BlueTrek

BlueTrek G2 Manuale utente

BlueTrek

BlueTrek Sense Guida di riferimento

BlueTrek

BlueTrek G2 Manuale utente

Manuali Cuffia popolari di altre marche

Sena

Sena SMH10 Manuale utente

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuale utente

Sennheiser

Sennheiser EPOS ADAPT 230 Manuale utente

Doro

Doro Flexus HS2005 Manuale utente

GE 98971 Manuale utente

Hama

Hama 00184070 Manuale utente

Plantronics

Plantronics Blackwire 3200 Series Manuale utente

Blue Tiger

Blue Tiger Advantage PLUS Manuale utente

Jawbone

Jawbone Icon Manuale utente

Jabra

Jabra FR 20 Manuale utente

Roxcore

Roxcore Flow A+ Manuale utente

Turtle Beach

Turtle Beach XP 510 Manuale utente

Philips

Philips SHB6101 Manuale utente

Jabra

Jabra PRO 9460 Duo Manuale utente

HyperX

HyperX HyperX Cloud Flight Manuale utente

Bose

Bose MIE2 Mobile Manuale utente

Jabra

Jabra Steel Manuale utente

HyperX

HyperX cloud ii Manuale utente